mirror of
https://github.com/eddyem/tsys01.git
synced 2025-12-06 10:35:14 +03:00
67 lines
2.8 KiB
C
67 lines
2.8 KiB
C
/*
|
|
* geany_encoding=koi8-r
|
|
* hardware.c - hardware-dependent macros & functions
|
|
*
|
|
* Copyright 2018 Edward V. Emelianov <eddy@sao.ru, edward.emelianoff@gmail.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
|
|
* MA 02110-1301, USA.
|
|
*
|
|
*/
|
|
|
|
#include "hardware.h"
|
|
|
|
void gpio_setup(void){
|
|
// Set green led (PB3) as output
|
|
RCC->AHBENR |= RCC_AHBENR_GPIOBEN | RCC_AHBENR_GPIOAEN;
|
|
GPIOB->MODER = GPIO_MODER_MODER3_O;
|
|
// setup of multiplexer channel address bus: PA3..8
|
|
GPIOA->MODER = GPIO_MODER_MODER3_O | GPIO_MODER_MODER4_O | GPIO_MODER_MODER5_O |
|
|
GPIO_MODER_MODER6_O | GPIO_MODER_MODER7_O | GPIO_MODER_MODER8_O;
|
|
}
|
|
|
|
void i2c_setup(I2C_SPEED speed){
|
|
I2C1->CR1 = 0;
|
|
#if I2CPINS == A9A10
|
|
/*
|
|
* GPIO Resources: I2C1_SCL - PA9, I2C1_SDA - PA10
|
|
* GPIOA->AFR[1] AF4 -- GPIOA->AFR[1] &= ~0xff0, GPIOA->AFR[1] |= 0x440
|
|
*/
|
|
RCC->AHBENR |= RCC_AHBENR_GPIOAEN; // clock
|
|
GPIOA->AFR[1] &= ~0xff0; // alternate function F4 for PA9/PA10
|
|
GPIOA->AFR[1] |= 0x440;
|
|
GPIOA->MODER &= ~(GPIO_MODER_MODER9 | GPIO_MODER_MODER10);
|
|
GPIOA->MODER |= GPIO_MODER_MODER9_AF | GPIO_MODER_MODER10_AF; // alternate function
|
|
GPIOA->OTYPER |= GPIO_OTYPER_OT_9 | GPIO_OTYPER_OT_10; // opendrain
|
|
//GPIOA->OTYPER |= GPIO_OTYPER_OT_10; // opendrain
|
|
#else // undefined
|
|
#error "Not implemented"
|
|
#endif
|
|
// I2C
|
|
RCC->APB1ENR |= RCC_APB1ENR_I2C1EN; // timing
|
|
RCC->CFGR3 |= RCC_CFGR3_I2C1SW; // use sysclock for timing
|
|
if(speed == LOW_SPEED){ // 10kHz
|
|
// PRESC=B, SCLDEL=4, SDADEL=2, SCLH=0xC3, SCLL=0xC7
|
|
//I2C1->TIMINGR = (0xB<<28) | (4<<20) | (2<<16) | (0xC3<<8) | (0xC7);
|
|
I2C1->TIMINGR = (0xB<<28) | (4<<20) | (2<<16) | (0xC3<<8) | (0xB0);
|
|
}else{ // 100kHz
|
|
// Clock = 6MHz, 0.16(6)us, need 5us (*30)
|
|
// PRESC=4 (f/5), SCLDEL=0 (t_SU=5/6us), SDADEL=0 (t_HD=5/6us), SCLL,SCLH=14 (2.(3)us)
|
|
//I2C1->TIMINGR = (4<<28) | (14<<8) | (14); // 0x40000e0e
|
|
I2C1->TIMINGR = (0xB<<28) | (4<<20) | (2<<16) | (0x12<<8) | (0x11);
|
|
}
|
|
I2C1->CR1 = I2C_CR1_PE;// | I2C_CR1_RXIE; // Enable I2C & (interrupt on receive - not supported yet)
|
|
}
|