/*
 *                                                                                                  geany_encoding=koi8-r
 * hardware.c - hardware-dependent macros & functions
 *
 * Copyright 2018 Edward V. Emelianov <eddy@sao.ru, edward.emelianoff@gmail.com>
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
 * MA 02110-1301, USA.
 *
 */

#include "hardware.h"

static I2C_SPEED curI2Cspeed = LOW_SPEED;

void gpio_setup(void){
    // PA9, PA10 - LEDs T0/T1
    RCC->AHBENR |= RCC_AHBENR_GPIOCEN | RCC_AHBENR_GPIOBEN | RCC_AHBENR_GPIOAEN;
    // Set LEDS (PA14/15)
    GPIOA->MODER = GPIO_MODER_MODER9_O | GPIO_MODER_MODER10_O |
                   GPIO_MODER_MODER14_O | GPIO_MODER_MODER15_O;
    // PC13 - digital output - poweron
    GPIOC->OTYPER = 1 << 13; // opendrain
    GPIOC->MODER = GPIO_MODER_MODER13_O;
    // D/C & Reset pins: D/C - PB1, Reset - PB0, CS - PB2
    GPIOB->MODER |= GPIO_MODER_MODER0_O | GPIO_MODER_MODER1_O | GPIO_MODER_MODER2_O;
}

void spi_setup(){
    /* Enable the peripheral clock of GPIOA */
    RCC->AHBENR |= RCC_AHBENR_GPIOAEN;
    /* (1) Select AF mode (10) on PA5, PA7, push-pull @PA4. MISO disabled (simplex mode)*/
    /* (2) AF0 for SPI1 signals */
    GPIOA->MODER = (GPIOA->MODER
                    & ~(GPIO_MODER_MODER5  | GPIO_MODER_MODER7)) \
                    | (GPIO_MODER_MODER5_AF | GPIO_MODER_MODER7_AF); /* (1) */
    GPIOA->AFR[0] = (GPIOA->AFR[0] & \
                    ~(GPIO_AFRL_AFRL5 | GPIO_AFRL_AFRL7)); /* (2) */

    /* Enable the peripheral clock SPI1 */
    RCC->APB2ENR |= RCC_APB2ENR_SPI1EN;

    /* Configure SPI1 in master */
    /* (1) Master selection, BR: Fpclk/256, software SS management
        CPOL and CPHA at zero (rising first edge) */
    /* (2) Slave select output disabled, 8-bit Rx fifo */
    /* (3) Enable SPI1 */
    SPI1->CR1 = SPI_CR1_MSTR | SPI_CR1_BR | SPI_CR1_SSM | SPI_CR1_SSI; /* (1) */
    SPI1->CR2 = SPI_CR2_FRXTH | SPI_CR2_DS_2 | SPI_CR2_DS_1 | SPI_CR2_DS_0; /* (2) */
    SPI1->CR1 |= SPI_CR1_SPE; /* (3) */
    CS_HI(); RST_HI();
}

void i2c_setup(I2C_SPEED speed){
    if(speed == CURRENT_SPEED){
        speed = curI2Cspeed;
    }else{
        curI2Cspeed = speed;
    }
    I2C1->CR1 = 0;
#if I2CPINS == 910
/*
 * GPIO Resources: I2C1_SCL - PA9, I2C1_SDA - PA10
 * GPIOA->AFR[1]
 */
    GPIOA->AFR[1] &= ~0xff0; // alternate function F4 for PA9/PA10
    GPIOA->AFR[1] |= 0x440;
    GPIOA->MODER &= ~(GPIO_MODER_MODER9 | GPIO_MODER_MODER10);
    GPIOA->MODER |= GPIO_MODER_MODER9_AF | GPIO_MODER_MODER10_AF; // alternate function
    GPIOA->OTYPER |= GPIO_OTYPER_OT_9 | GPIO_OTYPER_OT_10; // opendrain
    //GPIOA->OTYPER |= GPIO_OTYPER_OT_10; // opendrain
#elif I2CPINS == 67
/*
 * GPIO Resources: I2C1_SCL - PB6, I2C1_SDA - PB7 (AF1)
 * GPIOB->AFR[0] ->   1<<6*4 | 1<<7*4 = 0x11000000
 */
    GPIOB->AFR[0] = (GPIOB->AFR[0] & ~0xff000000) | 0x11000000;
    GPIOB->MODER = (GPIOB->MODER & ~(GPIO_MODER_MODER6 | GPIO_MODER_MODER7)) |
                    GPIO_MODER_MODER6_AF | GPIO_MODER_MODER7_AF;
    GPIOB->OTYPER |= GPIO_OTYPER_OT_6 | GPIO_OTYPER_OT_7;
#else // undefined
#error "Not implemented"
#endif
    // I2C
    RCC->APB1ENR |= RCC_APB1ENR_I2C1EN; // timing
    RCC->CFGR3 |= RCC_CFGR3_I2C1SW; // use sysclock for timing
    if(speed == LOW_SPEED){ // 10kHz
        // PRESC=B, SCLDEL=4, SDADEL=2, SCLH=0xC3, SCLL=0xB0
        I2C1->TIMINGR = (0xB<<28) | (4<<20) | (2<<16) | (0xC3<<8) | (0xB0);
    }else if(speed == HIGH_SPEED){ // 100kHz
        I2C1->TIMINGR = (0xB<<28) | (4<<20) | (2<<16) | (0x12<<8) | (0x11);
    }else{ // VERYLOW_SPEED - the lowest speed by STM register: 5.8kHz (presc = 16-1 = 15; )
        I2C1->TIMINGR = (0xf<<28) | (4<<20) | (2<<16) | (0xff<<8) | (0xff);
    }
    I2C1->CR1 = I2C_CR1_PE;// | I2C_CR1_RXIE; // Enable I2C & (interrupt on receive - not supported yet)
}