mirror of
https://github.com/eddyem/stm32samples.git
synced 2025-12-06 10:45:11 +03:00
310 lines
9.7 KiB
C
310 lines
9.7 KiB
C
/*
|
|
* This file is part of the chronometer project.
|
|
* Copyright 2019 Edward V. Emelianov <edward.emelianoff@gmail.com>.
|
|
*
|
|
* This program is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
|
|
#include "stm32f1.h"
|
|
#include "flash.h"
|
|
#include "lidar.h"
|
|
#include "str.h"
|
|
#include "usart.h"
|
|
|
|
extern volatile uint32_t Tms;
|
|
static volatile uint8_t idatalen[4][2] = {{0}}; // received data line length (including '\n')
|
|
static volatile uint8_t odatalen[4][2] = {{0}};
|
|
|
|
static volatile uint8_t dlen[4] = {0}; // length of data (including '\n') in current buffer
|
|
|
|
volatile uint8_t linerdy[4] = {0}, // received data ready
|
|
bufovr[4] = {0}, // input buffer overfull
|
|
txrdy[4] = {0,1,1,1} // transmission done
|
|
;
|
|
|
|
|
|
static uint8_t rbufno[4] = {0}, tbufno[4] = {0}; // current rbuf/tbuf numbers
|
|
static char rbuf[4][2][UARTBUFSZ], tbuf[4][2][UARTBUFSZ]; // receive & transmit buffers
|
|
static char *recvdata[4] = {0};
|
|
|
|
/**
|
|
* return length of received data (without trailing zero)
|
|
*/
|
|
int usart_getline(int n, char **line){
|
|
if(bufovr[n]){
|
|
bufovr[n] = 0;
|
|
linerdy[n] = 0;
|
|
return 0;
|
|
}
|
|
*line = recvdata[n];
|
|
linerdy[n] = 0;
|
|
return dlen[n];
|
|
}
|
|
|
|
// transmit current tbuf and swap buffers
|
|
void transmit_tbuf(uint8_t n){
|
|
DMA_Channel_TypeDef *DMA;
|
|
switch(n){ // also check if n wrong
|
|
case 1:
|
|
DMA = DMA1_Channel4;
|
|
break;
|
|
case 2:
|
|
DMA = DMA1_Channel7;
|
|
break;
|
|
case 3:
|
|
DMA = DMA1_Channel2;
|
|
break;
|
|
default: return;
|
|
}
|
|
uint32_t tmout = 72000;
|
|
while(!txrdy[n]){if(--tmout == 0) return;} // wait for previos buffer transmission
|
|
register uint32_t l = odatalen[n][tbufno[n]];
|
|
if(!l) return;
|
|
txrdy[n] = 0;
|
|
odatalen[n][tbufno[n]] = 0;
|
|
IWDG->KR = IWDG_REFRESH;
|
|
DMA->CCR &= ~DMA_CCR_EN;
|
|
DMA->CMAR = (uint32_t) tbuf[n][tbufno[n]]; // mem
|
|
DMA->CNDTR = l;
|
|
DMA->CCR |= DMA_CCR_EN;
|
|
tbufno[n] = !tbufno[n];
|
|
}
|
|
|
|
void usart_putchar(uint8_t n, char ch){
|
|
if(!n || n > USART_LAST+1) return;
|
|
for(int i = 0; odatalen[n][tbufno[n]] == UARTBUFSZ && i < 1024; ++i) transmit_tbuf(n);
|
|
tbuf[n][tbufno[n]][odatalen[n][tbufno[n]]++] = ch;
|
|
}
|
|
|
|
void usart_send(uint8_t n, const char *str){
|
|
if(!n || n > USART_LAST+1) return;
|
|
uint32_t x = 512;
|
|
while(*str && --x){
|
|
if(odatalen[n][tbufno[n]] == UARTBUFSZ){
|
|
transmit_tbuf(n);
|
|
continue;
|
|
}
|
|
tbuf[n][tbufno[n]][odatalen[n][tbufno[n]]++] = *str++;
|
|
}
|
|
}
|
|
|
|
// send newline ("\r" or "\r\n") and transmit whole buffer
|
|
// for GPS_USART endline always is "\r\n"
|
|
// @param n - USART number
|
|
void newline(uint8_t n){
|
|
if((the_conf.defflags & FLAG_STRENDRN) || n == GPS_USART) usart_putchar(n, '\r');
|
|
usart_putchar(n, '\n');
|
|
transmit_tbuf(n);
|
|
}
|
|
|
|
/*
|
|
* USART speed: baudrate = Fck/(USARTDIV)
|
|
* USARTDIV stored in USART->BRR
|
|
*
|
|
* for 72MHz USARTDIV=72000/f(kboud); so for 115200 USARTDIV=72000/115.2=625 -> BRR=0x271
|
|
* 9600: BRR = 7500 (0x1D4C)
|
|
*/
|
|
static void usart_setup(uint8_t n, uint16_t BRR){
|
|
DMA_Channel_TypeDef *DMA;
|
|
IRQn_Type DMAirqN, USARTirqN;
|
|
USART_TypeDef *USART;
|
|
switch(n){
|
|
case 1:
|
|
// USART1 Tx DMA - Channel4 (Rx - channel 5)
|
|
DMA = DMA1_Channel4;
|
|
DMAirqN = DMA1_Channel4_IRQn;
|
|
USARTirqN = USART1_IRQn;
|
|
// PA9 - Tx, PA10 - Rx
|
|
RCC->APB2ENR |= RCC_APB2ENR_IOPAEN | RCC_APB2ENR_USART1EN;
|
|
GPIOA->CRH |= CRH(9, CNF_AFPP|MODE_NORMAL) | CRH(10, CNF_FLINPUT|MODE_INPUT);
|
|
USART = USART1;
|
|
break;
|
|
case 2:
|
|
// USART2 Tx DMA - Channel7
|
|
DMA = DMA1_Channel7;
|
|
DMAirqN = DMA1_Channel7_IRQn;
|
|
USARTirqN = USART2_IRQn;
|
|
// PA2 - Tx, PA3 - Rx
|
|
RCC->APB2ENR |= RCC_APB2ENR_IOPAEN;
|
|
RCC->APB1ENR |= RCC_APB1ENR_USART2EN;
|
|
GPIOA->CRL |= CRL(2, CNF_AFPP|MODE_NORMAL) | CRL(3, CNF_FLINPUT|MODE_INPUT);
|
|
USART = USART2;
|
|
break;
|
|
case 3:
|
|
// USART3 Tx DMA - Channel2
|
|
DMA = DMA1_Channel2;
|
|
DMAirqN = DMA1_Channel2_IRQn;
|
|
USARTirqN = USART3_IRQn;
|
|
// PB10 - Tx, PB11 - Rx
|
|
RCC->APB2ENR |= RCC_APB2ENR_IOPBEN;
|
|
RCC->APB1ENR |= RCC_APB1ENR_USART3EN;
|
|
GPIOB->CRH |= CRH(10, CNF_AFPP|MODE_NORMAL) | CRH(11, CNF_FLINPUT|MODE_INPUT);
|
|
USART = USART3;
|
|
break;
|
|
default:
|
|
return;
|
|
}
|
|
DMA->CPAR = (uint32_t) &USART->DR; // periph
|
|
DMA->CCR |= DMA_CCR_MINC | DMA_CCR_DIR | DMA_CCR_TCIE; // 8bit, mem++, mem->per, transcompl irq
|
|
// setup usart(n)
|
|
USART->BRR = BRR;
|
|
USART->CR1 = USART_CR1_TE | USART_CR1_RE | USART_CR1_UE; // 1start,8data,nstop; enable Rx,Tx,USART
|
|
uint32_t tmout = 16000000;
|
|
while(!(USART->SR & USART_SR_TC)){if(--tmout == 0) break;} // polling idle frame Transmission
|
|
USART->SR = 0; // clear flags
|
|
USART->CR1 |= USART_CR1_RXNEIE; // allow Rx IRQ
|
|
USART->CR3 = USART_CR3_DMAT; // enable DMA Tx
|
|
// Tx CNDTR set @ each transmission due to data size
|
|
NVIC_SetPriority(DMAirqN, n);
|
|
NVIC_EnableIRQ(DMAirqN);
|
|
NVIC_SetPriority(USARTirqN, n);
|
|
NVIC_EnableIRQ(USARTirqN);
|
|
}
|
|
|
|
void usarts_setup(){
|
|
RCC->AHBENR |= RCC_AHBENR_DMA1EN;
|
|
usart_setup(1, 72000000 / the_conf.USART_speed); // debug console or GPS proxy
|
|
usart_setup(GPS_USART, 36000000 / GPS_DEFAULT_SPEED); // GPS
|
|
usart_setup(LIDAR_USART, 36000000 / the_conf.LIDAR_speed); // LIDAR
|
|
}
|
|
|
|
|
|
static void usart_isr(uint8_t n, USART_TypeDef *USART){
|
|
#ifdef CHECK_TMOUT
|
|
static uint32_t tmout[n] = 0;
|
|
#endif
|
|
IWDG->KR = IWDG_REFRESH;
|
|
if(USART->SR & USART_SR_RXNE){ // RX not emty - receive next char
|
|
#ifdef CHECK_TMOUT
|
|
if(tmout[n] && Tms >= tmout[n]){ // set overflow flag
|
|
bufovr[n] = 1;
|
|
idatalen[n][rbufno[n]] = 0;
|
|
}
|
|
tmout[n] = Tms + TIMEOUT_MS;
|
|
if(!tmout[n]) tmout[n] = 1; // prevent 0
|
|
#endif
|
|
char rb = (char)USART->DR;
|
|
if(idatalen[n][rbufno[n]] < UARTBUFSZ){ // put next char into buf
|
|
if(rb != '\r') rbuf[n][rbufno[n]][idatalen[n][rbufno[n]]++] = rb; // omit '\r'
|
|
if(rb == '\n'){ // got newline - line ready
|
|
linerdy[n] = 1;
|
|
dlen[n] = idatalen[n][rbufno[n]];
|
|
rbuf[n][rbufno[n]][dlen[n]] = 0;
|
|
recvdata[n] = rbuf[n][rbufno[n]];
|
|
// prepare other buffer
|
|
rbufno[n] = !rbufno[n];
|
|
idatalen[n][rbufno[n]] = 0;
|
|
#ifdef CHECK_TMOUT
|
|
// clear timeout at line end
|
|
tmout[n] = 0;
|
|
#endif
|
|
}
|
|
}else{ // buffer overrun
|
|
bufovr[n] = 1;
|
|
idatalen[n][rbufno[n]] = 0;
|
|
#ifdef CHECK_TMOUT
|
|
tmout[n] = 0;
|
|
#endif
|
|
}
|
|
}
|
|
}
|
|
|
|
void usart1_isr(){
|
|
usart_isr(1, USART1);
|
|
}
|
|
|
|
// GPS_USART
|
|
void usart2_isr(){
|
|
usart_isr(2, USART2);
|
|
}
|
|
|
|
// LIDAR_USART
|
|
void usart3_isr(){
|
|
if(the_conf.defflags & FLAG_NOLIDAR){ // regular TTY
|
|
usart_isr(3, USART3);
|
|
return;
|
|
}
|
|
// LIDAR - check for different things
|
|
IWDG->KR = IWDG_REFRESH;
|
|
if(USART3->SR & USART_SR_RXNE){ // RX not emty - receive next char
|
|
char rb = (char)USART3->DR;
|
|
uint8_t L = idatalen[3][rbufno[3]];
|
|
if(rb != LIDAR_FRAME_HEADER && (L == 0 || L == 1)){ // bad starting sequence
|
|
idatalen[3][rbufno[3]] = 0;
|
|
return;
|
|
}
|
|
if(L < LIDAR_FRAME_LEN){ // put next char into buf
|
|
rbuf[3][rbufno[3]][idatalen[3][rbufno[3]]++] = rb;
|
|
if(L == LIDAR_FRAME_LEN-1){ // got LIDAR_FRAME_LEN bytes - line ready
|
|
linerdy[3] = 1;
|
|
dlen[3] = idatalen[3][rbufno[3]];
|
|
recvdata[3] = rbuf[3][rbufno[3]];
|
|
// prepare other buffer
|
|
rbufno[3] = !rbufno[3];
|
|
idatalen[3][rbufno[3]] = 0;
|
|
}
|
|
}else{ // buffer overrun
|
|
idatalen[3][rbufno[3]] = 0;
|
|
}
|
|
}
|
|
}
|
|
|
|
// print 32bit unsigned int
|
|
void printu(uint8_t n, uint32_t val){
|
|
usart_send(n, u2str(val));
|
|
}
|
|
|
|
// print 32bit unsigned int as hex
|
|
void printuhex(uint8_t n, uint32_t val){
|
|
usart_send(n, u2hex(val));
|
|
}
|
|
|
|
#ifdef EBUG
|
|
// dump memory buffer
|
|
void hexdump(uint8_t *arr, uint16_t len){
|
|
for(uint16_t l = 0; l < len; ++l, ++arr){
|
|
IWDG->KR = IWDG_REFRESH;
|
|
for(int16_t j = 1; j > -1; --j){
|
|
register uint8_t half = (*arr >> (4*j)) & 0x0f;
|
|
if(half < 10) usart_putchar(1, half + '0');
|
|
else usart_putchar(1, half - 10 + 'a');
|
|
}
|
|
if(l % 16 == 15) usart_putchar(1, '\n');
|
|
else if((l & 3) == 3) usart_putchar(1, ' ');
|
|
}
|
|
}
|
|
#endif
|
|
|
|
void dma1_channel4_isr(){ // USART1
|
|
if(DMA1->ISR & DMA_ISR_TCIF4){ // Tx
|
|
DMA1->IFCR = DMA_IFCR_CTCIF4; // clear TC flag
|
|
txrdy[1] = 1;
|
|
}
|
|
}
|
|
|
|
void dma1_channel7_isr(){ // USART2
|
|
if(DMA1->ISR & DMA_ISR_TCIF7){ // Tx
|
|
DMA1->IFCR = DMA_IFCR_CTCIF7; // clear TC flag
|
|
txrdy[2] = 1;
|
|
}
|
|
}
|
|
|
|
void dma1_channel2_isr(){ // USART3
|
|
if(DMA1->ISR & DMA_ISR_TCIF2){ // Tx
|
|
DMA1->IFCR = DMA_IFCR_CTCIF2; // clear TC flag
|
|
txrdy[3] = 1;
|
|
}
|
|
}
|