mirror of
https://github.com/eddyem/stm32samples.git
synced 2025-12-06 18:55:13 +03:00
63 lines
2.4 KiB
C
63 lines
2.4 KiB
C
/*
|
|
* This file is part of the SevenCDCs project.
|
|
* Copyright 2023 Edward V. Emelianov <edward.emelianoff@gmail.com>.
|
|
*
|
|
* This program is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#include "hardware.h"
|
|
#include "usart.h"
|
|
|
|
TRUE_INLINE void iwdg_setup(){
|
|
uint32_t tmout = 16000000;
|
|
/* Enable the peripheral clock RTC */
|
|
/* (1) Enable the LSI (40kHz) */
|
|
/* (2) Wait while it is not ready */
|
|
RCC->CSR |= RCC_CSR_LSION; /* (1) */
|
|
while((RCC->CSR & RCC_CSR_LSIRDY) != RCC_CSR_LSIRDY){if(--tmout == 0) break;} /* (2) */
|
|
/* Configure IWDG */
|
|
/* (1) Activate IWDG (not needed if done in option bytes) */
|
|
/* (2) Enable write access to IWDG registers */
|
|
/* (3) Set prescaler by 64 (1.6ms for each tick) */
|
|
/* (4) Set reload value to have a rollover each 2s */
|
|
/* (5) Check if flags are reset */
|
|
/* (6) Refresh counter */
|
|
IWDG->KR = IWDG_START; /* (1) */
|
|
IWDG->KR = IWDG_WRITE_ACCESS; /* (2) */
|
|
IWDG->PR = IWDG_PR_PR_1; /* (3) */
|
|
IWDG->RLR = 1250; /* (4) */
|
|
tmout = 16000000;
|
|
while(IWDG->SR){if(--tmout == 0) break;} /* (5) */
|
|
IWDG->KR = IWDG_REFRESH; /* (6) */
|
|
}
|
|
|
|
|
|
static inline void gpio_setup(){
|
|
RCC->AHBENR |= RCC_AHBENR_GPIOAEN | RCC_AHBENR_GPIOBEN;
|
|
// USB - alternate function 14 @ pins PA11/PA12; USART1 = AF7 @PA9/10; SWD - AF0 @PA13/14
|
|
GPIOA->AFR[1] = AFRf(7, 9) | AFRf(7, 10) | AFRf(14, 11) | AFRf(14, 12);
|
|
// USART1: PA10(Rx), PA9(Tx); USB - PA11, PA12; SWDIO - PA13, PA14; Pullup - PA15
|
|
GPIOA->MODER = MODER_AF(9) | MODER_AF(10) | MODER_AF(11) | MODER_AF(12) | MODER_AF(13) | MODER_AF(14) | MODER_O(15);
|
|
GPIOA->OSPEEDR = OSPEED_HI(11) | OSPEED_HI(12) | OSPEED_HI(13) | OSPEED_HI(14);
|
|
// LEDs on PB0 and PB1
|
|
GPIOB->MODER = GPIO_MODER_MODER0_O | GPIO_MODER_MODER1_O;
|
|
GPIOB->ODR = 1;
|
|
}
|
|
|
|
void hw_setup(){
|
|
gpio_setup();
|
|
iwdg_setup();
|
|
}
|
|
|