mirror of
https://github.com/eddyem/stm32samples.git
synced 2025-12-06 10:45:11 +03:00
74 lines
2.6 KiB
C
74 lines
2.6 KiB
C
/*
|
|
* This file is part of the Chiller project.
|
|
* Copyright 2018 Edward V. Emelianov <edward.emelianoff@gmail.com>.
|
|
*
|
|
* This program is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
#include "hardware.h"
|
|
#include "usart.h"
|
|
|
|
volatile uint8_t tim3upd = 0;
|
|
|
|
/**
|
|
* @brief gpio_setup - setup GPIOs for external IO
|
|
* GPIO pinout:
|
|
* PA4 - open drain - onboard LED (always ON when board works)
|
|
* PA6, PA7 - TIM3_CH1/CH2 - encoder input
|
|
*/
|
|
static inline void gpio_setup(){
|
|
// Enable clocks to the GPIO subsystems
|
|
RCC->AHBENR |= RCC_AHBENR_GPIOAEN | RCC_AHBENR_GPIOBEN | RCC_AHBENR_GPIOFEN;
|
|
// PA6/7 - AF; PB1 - AF
|
|
GPIOA->MODER = GPIO_MODER_MODER4_O | GPIO_MODER_MODER6_AF | GPIO_MODER_MODER7_AF;
|
|
GPIOA->OTYPER = GPIO_OTYPER_OT_4;
|
|
// alternate functions:
|
|
// PA6 - TIM3_CH1, PA7 - TIM3_CH2
|
|
GPIOA->AFR[0] = (GPIOA->AFR[0] &~ (GPIO_AFRL_AFRL6 | GPIO_AFRL_AFRL7)) \
|
|
| (1 << (6 * 4)) | (1 << (7 * 4));
|
|
}
|
|
|
|
static inline void timers_setup(){
|
|
RCC->APB1ENR |= RCC_APB1ENR_TIM3EN;
|
|
/* (1) Configure TI1FP1 on TI1 (CC1S = 01)
|
|
configure TI1FP2 on TI2 (CC2S = 01) */
|
|
/* (2) Configure TI1FP1 and TI1FP2 non inverted (CC1P = CC2P = 0, reset value) */
|
|
/* (3) Configure both inputs are active on both rising and falling edges
|
|
(SMS = 011), set external trigger filter to f_DTS/8, N=6 (ETF=1000) */
|
|
/* (4) Enable the counter by writing CEN=1 in the TIMx_CR1 register. */
|
|
TIM3->CCMR1 = TIM_CCMR1_CC1S_0 | TIM_CCMR1_CC2S_0; /* (1)*/
|
|
//TIMx->CCER &= (uint16_t)(~(TIM_CCER_CC21 | TIM_CCER_CC2P); /* (2) */
|
|
TIM3->SMCR = TIM_SMCR_ETF_3 | TIM_SMCR_SMS_0 | TIM_SMCR_SMS_1; /* (3) */
|
|
// enable update interrupt
|
|
TIM3->DIER = TIM_DIER_UIE;
|
|
// set ARR to 79 - generate interrupt each 80 counts (one revolution)
|
|
TIM3->ARR = 79;
|
|
// enable timer
|
|
TIM3->CR1 = TIM_CR1_CEN; /* (4) */
|
|
NVIC_EnableIRQ(TIM3_IRQn);
|
|
}
|
|
|
|
void hw_setup(){
|
|
sysreset();
|
|
gpio_setup();
|
|
timers_setup();
|
|
USART1_config();
|
|
}
|
|
|
|
void tim3_isr(){
|
|
if(TIM3->SR & TIM_SR_UIF){
|
|
tim3upd = 1;
|
|
}
|
|
TIM3->SR = 0;
|
|
}
|