mirror of
https://github.com/eddyem/stm32samples.git
synced 2025-12-06 10:45:11 +03:00
481 lines
19 KiB
C
481 lines
19 KiB
C
/*
|
|
* geany_encoding=koi8-r
|
|
* usb_lib.c
|
|
*
|
|
* Copyright 2018 Edward V. Emelianov <eddy@sao.ru, edward.emelianoff@gmail.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
|
|
* MA 02110-1301, USA.
|
|
*
|
|
*/
|
|
|
|
#include <stdint.h>
|
|
#include "usb_lib.h"
|
|
#include "usart.h"
|
|
|
|
ep_t endpoints[STM32ENDPOINTS];
|
|
|
|
usb_dev_t USB_Dev;
|
|
static config_pack_t setup_packet;
|
|
|
|
uint8_t usbON = 0; // device disconnected from terminal
|
|
|
|
// definition of parts common for USB_DeviceDescriptor & USB_DeviceQualifierDescriptor
|
|
#define bcdUSB_L 0x00
|
|
#define bcdUSB_H 0x02
|
|
#define bDeviceClass 0
|
|
#define bDeviceSubClass 0
|
|
#define bDeviceProtocol 0
|
|
#define bNumConfigurations 1
|
|
|
|
static const uint8_t USB_DeviceDescriptor[] = {
|
|
18, // bLength
|
|
0x01, // bDescriptorType - Device descriptor
|
|
bcdUSB_L, // bcdUSB_L - 2.00
|
|
bcdUSB_H, // bcdUSB_H
|
|
bDeviceClass, // bDeviceClass - USB_COMM
|
|
bDeviceSubClass, // bDeviceSubClass
|
|
bDeviceProtocol, // bDeviceProtocol
|
|
USB_EP0_BUFSZ, // bMaxPacketSize0
|
|
0x5e, // idVendor: Microsoft
|
|
0x04, // idVendor_H
|
|
0x5c, // idProduct: Office Keyboard (106/109)
|
|
0x00, // idProduct_H
|
|
0x00, // bcdDevice_Ver_L
|
|
0x02, // bcdDevice_Ver_H
|
|
0x01, // iManufacturer
|
|
0x02, // iProduct
|
|
0x03, // iSerialNumber
|
|
bNumConfigurations // bNumConfigurations
|
|
};
|
|
|
|
static const uint8_t USB_DeviceQualifierDescriptor[] = {
|
|
10, //bLength
|
|
0x06, // bDescriptorType - Device qualifier
|
|
bcdUSB_L, // bcdUSB_L
|
|
bcdUSB_H, // bcdUSB_H
|
|
bDeviceClass, // bDeviceClass
|
|
bDeviceSubClass, // bDeviceSubClass
|
|
bDeviceProtocol, // bDeviceProtocol
|
|
USB_EP0_BUFSZ, // bMaxPacketSize0
|
|
bNumConfigurations, // bNumConfigurations
|
|
0x00 // Reserved
|
|
};
|
|
|
|
static const uint8_t HID_ReportDescriptor[] = {
|
|
0x05, 0x01, /* Usage Page (Generic Desktop) */
|
|
0x09, 0x02, /* Usage (Mouse) */
|
|
0xA1, 0x01, /* Collection (Application) */
|
|
0x09, 0x01, /* Usage (Pointer) */
|
|
0xA1, 0x00, /* Collection (Physical) */
|
|
0x85, 0x01, /* Report ID */
|
|
0x05, 0x09, /* Usage Page (Buttons) */
|
|
0x19, 0x01, /* Usage Minimum (01) */
|
|
0x29, 0x03, /* Usage Maximum (03) */
|
|
0x15, 0x00, /* Logical Minimum (0) */
|
|
0x25, 0x01, /* Logical Maximum (0) */
|
|
0x95, 0x03, /* Report Count (3) */
|
|
0x75, 0x01, /* Report Size (1) */
|
|
0x81, 0x02, /* Input (Data, Variable, Absolute) */
|
|
0x95, 0x01, /* Report Count (1) */
|
|
0x75, 0x05, /* Report Size (5) */
|
|
0x81, 0x01, /* Input (Constant) ;5 bit padding */
|
|
0x05, 0x01, /* Usage Page (Generic Desktop) */
|
|
0x09, 0x30, /* Usage (X) */
|
|
0x09, 0x31, /* Usage (Y) */
|
|
0x15, 0x81, /* Logical Minimum (-127) */
|
|
0x25, 0x7F, /* Logical Maximum (127) */
|
|
0x75, 0x08, /* Report Size (8) */
|
|
0x95, 0x02, /* Report Count (2) */
|
|
0x81, 0x06, /* Input (Data, Variable, Relative) */
|
|
0xC0, 0xC0,/* End Collection,End Collection */
|
|
//
|
|
0x09, 0x06, /* Usage (Keyboard) */
|
|
0xA1, 0x01, /* Collection (Application) */
|
|
0x85, 0x02, /* Report ID */
|
|
0x05, 0x07, /* Usage (Key codes) */
|
|
0x19, 0xE0, /* Usage Minimum (224) */
|
|
0x29, 0xE7, /* Usage Maximum (231) */
|
|
0x15, 0x00, /* Logical Minimum (0) */
|
|
0x25, 0x01, /* Logical Maximum (1) */
|
|
0x75, 0x01, /* Report Size (1) */
|
|
0x95, 0x08, /* Report Count (8) */
|
|
0x81, 0x02, /* Input (Data, Variable, Absolute) */
|
|
0x95, 0x01, /* Report Count (1) */
|
|
0x75, 0x08, /* Report Size (8) */
|
|
0x81, 0x01, /* Input (Constant) ;5 bit padding */
|
|
0x95, 0x05, /* Report Count (5) */
|
|
0x75, 0x01, /* Report Size (1) */
|
|
0x05, 0x08, /* Usage Page (Page# for LEDs) */
|
|
0x19, 0x01, /* Usage Minimum (01) */
|
|
0x29, 0x05, /* Usage Maximum (05) */
|
|
0x91, 0x02, /* Output (Data, Variable, Absolute) */
|
|
0x95, 0x01, /* Report Count (1) */
|
|
0x75, 0x03, /* Report Size (3) */
|
|
0x91, 0x01, /* Output (Constant) */
|
|
0x95, 0x06, /* Report Count (1) */
|
|
0x75, 0x08, /* Report Size (3) */
|
|
0x15, 0x00, /* Logical Minimum (0) */
|
|
0x25, 0x65, /* Logical Maximum (101) */
|
|
0x05, 0x07, /* Usage (Key codes) */
|
|
0x19, 0x00, /* Usage Minimum (00) */
|
|
0x29, 0x65, /* Usage Maximum (101) */
|
|
0x81, 0x00, /* Input (Data, Array) */
|
|
0xC0 /* End Collection,End Collection */
|
|
};
|
|
|
|
static const uint8_t USB_ConfigDescriptor[] = {
|
|
/*Configuration Descriptor*/
|
|
0x09, /* bLength: Configuration Descriptor size */
|
|
0x02, /* bDescriptorType: Configuration */
|
|
34, /* wTotalLength */
|
|
0x00,
|
|
0x01, /* bNumInterfaces: 1 interface */
|
|
0x01, /* bConfigurationValue: Configuration value */
|
|
0x00, /* iConfiguration: Index of string descriptor describing the configuration */
|
|
0xa0, /* bmAttributes - Bus powered */
|
|
0x32, /* MaxPower 100 mA */
|
|
/*Interface Descriptor */
|
|
0x09, /* bLength: Interface Descriptor size */
|
|
0x04, /* bDescriptorType: Interface */
|
|
0x00, /* bInterfaceNumber: Number of Interface */
|
|
0x00, /* bAlternateSetting: Alternate setting */
|
|
0x01, /* bNumEndpoints: 1 endpoint used */
|
|
0x03, /* bInterfaceClass: USB_CLASS_HID */
|
|
0x01, /* bInterfaceSubClass: boot */
|
|
0x01, /* bInterfaceProtocol: keyboard */
|
|
0x00, /* iInterface: */
|
|
/* HID device descriptor */
|
|
0x09, /* bLength: HID Device Descriptor size */
|
|
0x21, /* bDescriptorType: HID */
|
|
0x10, /* bcdHID: 1.10 */
|
|
0x01, /* bcdHIDH */
|
|
0x00, /* bCountryCode: Not supported */
|
|
0x01, /* bNumDescriptors: 1 */
|
|
0x22, /* bDescriptorType: Report */
|
|
sizeof(HID_ReportDescriptor), /* wDescriptorLength */
|
|
0x00, /* wDescriptorLengthH */
|
|
/*Endpoint 1 Descriptor*/
|
|
0x07, /* bLength: Endpoint Descriptor size */
|
|
0x05, /* bDescriptorType: Endpoint */
|
|
0x81, /* bEndpointAddress IN1 */
|
|
0x03, /* bmAttributes: Interrupt */
|
|
USB_TXBUFSZ, /* wMaxPacketSize LO: */
|
|
0x00, /* wMaxPacketSize HI: */
|
|
0x01, /* bInterval: */
|
|
};
|
|
|
|
USB_LANG_ID(USB_StringLangDescriptor, LANG_US);
|
|
USB_STRING(USB_StringSerialDescriptor, u"01");
|
|
USB_STRING(USB_StringManufacturingDescriptor, u"Eddy @ SAO RAS");
|
|
USB_STRING(USB_StringProdDescriptor, u"USB HID mouse+keyboard");
|
|
|
|
static void wr0(const uint8_t *buf, uint16_t size){
|
|
if(setup_packet.wLength < size) size = setup_packet.wLength; // shortened request
|
|
if(size < endpoints[0].txbufsz){
|
|
EP_WriteIRQ(0, buf, size);
|
|
return;
|
|
}
|
|
while(size){
|
|
uint16_t l = size;
|
|
if(l > endpoints[0].txbufsz) l = endpoints[0].txbufsz;
|
|
EP_WriteIRQ(0, buf, l);
|
|
buf += l;
|
|
size -= l;
|
|
uint8_t needzlp = (l == endpoints[0].txbufsz) ? 1 : 0;
|
|
if(size || needzlp){ // send last data buffer
|
|
uint16_t status = KEEP_DTOG(USB->EPnR[0]);
|
|
// keep DTOGs, clear CTR_RX,TX, set TX VALID, leave stat_Rx
|
|
USB->EPnR[0] = (status & ~(USB_EPnR_CTR_RX|USB_EPnR_CTR_TX|USB_EPnR_STAT_RX))
|
|
^ USB_EPnR_STAT_TX;
|
|
uint32_t ctr = 1000000;
|
|
while(--ctr && (USB->ISTR & USB_ISTR_CTR) == 0){IWDG->KR = IWDG_REFRESH;};
|
|
if((USB->ISTR & USB_ISTR_CTR) == 0){
|
|
return;
|
|
}
|
|
if(needzlp) EP_WriteIRQ(0, (uint8_t*)0, 0);
|
|
}
|
|
}
|
|
}
|
|
|
|
static inline void get_descriptor(){
|
|
switch(setup_packet.wValue){
|
|
case DEVICE_DESCRIPTOR:
|
|
DBG("DEVICE_DESCRIPTOR");
|
|
wr0(USB_DeviceDescriptor, sizeof(USB_DeviceDescriptor));
|
|
break;
|
|
case CONFIGURATION_DESCRIPTOR:
|
|
DBG("CONFIGURATION_DESCRIPTOR");
|
|
wr0(USB_ConfigDescriptor, sizeof(USB_ConfigDescriptor));
|
|
break;
|
|
case STRING_LANG_DESCRIPTOR:
|
|
DBG("STRING_LANG_DESCRIPTOR");
|
|
wr0((const uint8_t *)&USB_StringLangDescriptor, STRING_LANG_DESCRIPTOR_SIZE_BYTE);
|
|
break;
|
|
case STRING_MAN_DESCRIPTOR:
|
|
DBG("STRING_MAN_DESCRIPTOR");
|
|
wr0((const uint8_t *)&USB_StringManufacturingDescriptor, USB_StringManufacturingDescriptor.bLength);
|
|
break;
|
|
case STRING_PROD_DESCRIPTOR:
|
|
DBG("STRING_PROD_DESCRIPTOR");
|
|
wr0((const uint8_t *)&USB_StringProdDescriptor, USB_StringProdDescriptor.bLength);
|
|
break;
|
|
case STRING_SN_DESCRIPTOR:
|
|
DBG("STRING_SN_DESCRIPTOR");
|
|
wr0((const uint8_t *)&USB_StringSerialDescriptor, USB_StringSerialDescriptor.bLength);
|
|
break;
|
|
case DEVICE_QUALIFIER_DESCRIPTOR:
|
|
DBG("DEVICE_QUALIFIER_DESCRIPTOR");
|
|
wr0(USB_DeviceQualifierDescriptor, USB_DeviceQualifierDescriptor[0]);
|
|
break;
|
|
default:
|
|
MSG("WTF?");
|
|
#ifdef EBUG
|
|
printuhex(setup_packet.wValue);
|
|
newline();
|
|
#endif
|
|
break;
|
|
}
|
|
}
|
|
|
|
static uint8_t configuration = 0; // reply for GET_CONFIGURATION (==1 if configured)
|
|
static inline void std_d2h_req(){
|
|
uint16_t status = 0; // bus powered
|
|
switch(setup_packet.bRequest){
|
|
case GET_DESCRIPTOR:
|
|
get_descriptor();
|
|
break;
|
|
case GET_STATUS:
|
|
EP_WriteIRQ(0, (uint8_t *)&status, 2); // send status: Bus Powered
|
|
break;
|
|
case GET_CONFIGURATION:
|
|
EP_WriteIRQ(0, &configuration, 1);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
static inline void std_h2d_req(){
|
|
switch(setup_packet.bRequest){
|
|
case SET_ADDRESS:
|
|
// new address will be assigned later - after acknowlegement or request to host
|
|
USB_Dev.USB_Addr = setup_packet.wValue;
|
|
break;
|
|
case SET_CONFIGURATION:
|
|
// Now device configured
|
|
USB_Dev.USB_Status = USB_STATE_CONFIGURED;
|
|
configuration = setup_packet.wValue;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* Endpoint0 (control) handler
|
|
* @param ep - endpoint state
|
|
* @return data written to EP0R
|
|
*/
|
|
static void EP0_Handler(){
|
|
uint16_t epstatus = USB->EPnR[0]; // EP0R on input -> return this value after modifications
|
|
uint8_t reqtype = setup_packet.bmRequestType & 0x7f;
|
|
uint8_t dev2host = (setup_packet.bmRequestType & 0x80) ? 1 : 0;
|
|
int rxflag = RX_FLAG(epstatus);
|
|
if(rxflag && SETUP_FLAG(epstatus)){
|
|
switch(reqtype){
|
|
case STANDARD_DEVICE_REQUEST_TYPE: // standard device request
|
|
if(dev2host){
|
|
std_d2h_req();
|
|
}else{
|
|
std_h2d_req();
|
|
EP_WriteIRQ(0, (uint8_t *)0, 0);
|
|
}
|
|
break;
|
|
case STANDARD_INTERFACE_REQUEST_TYPE:
|
|
if(dev2host && setup_packet.bRequest == GET_DESCRIPTOR){
|
|
if(setup_packet.wValue == HID_REPORT_DESCRIPTOR){
|
|
DBG("HID_REPORT_DESCRIPTOR");
|
|
wr0(HID_ReportDescriptor, sizeof(HID_ReportDescriptor));
|
|
}
|
|
}
|
|
break;
|
|
case STANDARD_ENDPOINT_REQUEST_TYPE: // standard endpoint request
|
|
if(setup_packet.bRequest == CLEAR_FEATURE){
|
|
EP_WriteIRQ(0, (uint8_t *)0, 0);
|
|
}
|
|
break;
|
|
case CONTROL_REQUEST_TYPE:
|
|
if(setup_packet.bRequest == SET_IDLE_REQUEST){
|
|
EP_WriteIRQ(0, (uint8_t *)0, 0);
|
|
}else if (setup_packet.bRequest == SET_FEAUTRE){
|
|
//set_featuring = 1;
|
|
}
|
|
break;
|
|
default:
|
|
EP_WriteIRQ(0, (uint8_t *)0, 0);
|
|
MSG("WTF?");
|
|
}
|
|
}else if(TX_FLAG(epstatus)){
|
|
// now we can change address after enumeration
|
|
if ((USB->DADDR & USB_DADDR_ADD) != USB_Dev.USB_Addr){
|
|
USB->DADDR = USB_DADDR_EF | USB_Dev.USB_Addr;
|
|
// change state to ADRESSED
|
|
USB_Dev.USB_Status = USB_STATE_ADDRESSED;
|
|
}
|
|
}
|
|
epstatus = KEEP_DTOG(USB->EPnR[0]);
|
|
if(rxflag) epstatus ^= USB_EPnR_STAT_TX; // start ZLP/data transmission
|
|
else epstatus &= ~USB_EPnR_STAT_TX; // or leave unchanged
|
|
// keep DTOGs, clear CTR_RX,TX, set RX VALID
|
|
USB->EPnR[0] = (epstatus & ~(USB_EPnR_CTR_RX|USB_EPnR_CTR_TX)) ^ USB_EPnR_STAT_RX;
|
|
}
|
|
|
|
static uint16_t lastaddr = LASTADDR_DEFAULT;
|
|
/**
|
|
* Endpoint initialisation
|
|
* @param number - EP num (0...7)
|
|
* @param type - EP type (EP_TYPE_BULK, EP_TYPE_CONTROL, EP_TYPE_ISO, EP_TYPE_INTERRUPT)
|
|
* @param txsz - transmission buffer size @ USB/CAN buffer
|
|
* @param rxsz - reception buffer size @ USB/CAN buffer
|
|
* @param void (*func)() - EP handler function
|
|
* @return 0 if all OK
|
|
*/
|
|
int EP_Init(uint8_t number, uint8_t type, uint16_t txsz, uint16_t rxsz, void (*func)()){
|
|
if(number >= STM32ENDPOINTS) return 4; // out of configured amount
|
|
if(txsz > USB_BTABLE_SIZE || rxsz > USB_BTABLE_SIZE) return 1; // buffer too large
|
|
if(lastaddr + txsz + rxsz >= USB_BTABLE_SIZE) return 2; // out of btable
|
|
USB->EPnR[number] = (type << 9) | (number & USB_EPnR_EA);
|
|
USB->EPnR[number] ^= USB_EPnR_STAT_RX | USB_EPnR_STAT_TX_1;
|
|
if(rxsz & 1 || rxsz > 512) return 3; // wrong rx buffer size
|
|
uint16_t countrx = 0;
|
|
if(rxsz < 64) countrx = rxsz / 2;
|
|
else{
|
|
if(rxsz & 0x1f) return 3; // should be multiple of 32
|
|
countrx = 31 + rxsz / 32;
|
|
}
|
|
USB_BTABLE->EP[number].USB_ADDR_TX = lastaddr;
|
|
endpoints[number].tx_buf = (uint16_t *)(USB_BTABLE_BASE + lastaddr*2);
|
|
endpoints[number].txbufsz = txsz;
|
|
lastaddr += txsz;
|
|
USB_BTABLE->EP[number].USB_COUNT_TX = 0;
|
|
USB_BTABLE->EP[number].USB_ADDR_RX = lastaddr;
|
|
endpoints[number].rx_buf = (uint16_t *)(USB_BTABLE_BASE + lastaddr*2);
|
|
lastaddr += rxsz;
|
|
USB_BTABLE->EP[number].USB_COUNT_RX = countrx << 10;
|
|
endpoints[number].func = func;
|
|
return 0;
|
|
}
|
|
|
|
// standard IRQ handler
|
|
void usb_lp_can_rx0_isr(){
|
|
if(USB->ISTR & USB_ISTR_RESET){
|
|
usbON = 0;
|
|
DBG("RESET");
|
|
USB->CNTR = USB_CNTR_RESETM | USB_CNTR_CTRM | USB_CNTR_SUSPM | USB_CNTR_WKUPM;
|
|
// Endpoint 0 - CONTROL
|
|
// ON USB LS size of EP0 may be 8 bytes, but on FS it should be 64 bytes!
|
|
lastaddr = LASTADDR_DEFAULT;
|
|
// clear address, leave only enable bit
|
|
USB->DADDR = USB_DADDR_EF;
|
|
// state is default - wait for enumeration
|
|
USB_Dev.USB_Status = USB_STATE_DEFAULT;
|
|
USB->ISTR = ~USB_ISTR_RESET;
|
|
if(EP_Init(0, EP_TYPE_CONTROL, USB_EP0_BUFSZ, USB_EP0_BUFSZ, EP0_Handler)){
|
|
return;
|
|
}
|
|
}
|
|
if(USB->ISTR & USB_ISTR_CTR){
|
|
// EP number
|
|
uint8_t n = USB->ISTR & USB_ISTR_EPID;
|
|
// copy status register
|
|
uint16_t epstatus = USB->EPnR[n];
|
|
// copy received bytes amount
|
|
endpoints[n].rx_cnt = USB_BTABLE->EP[n].USB_COUNT_RX & 0x3FF; // low 10 bits is counter
|
|
// check direction
|
|
if(USB->ISTR & USB_ISTR_DIR){ // OUT interrupt - receive data, CTR_RX==1 (if CTR_TX == 1 - two pending transactions: receive following by transmit)
|
|
if(n == 0){ // control endpoint
|
|
if(epstatus & USB_EPnR_SETUP){ // setup packet -> copy data to conf_pack
|
|
EP_Read(0, (uint16_t*)&setup_packet);
|
|
// interrupt handler will be called later
|
|
}
|
|
}
|
|
}else{ // IN interrupt - transmit data, only CTR_TX == 1
|
|
// enumeration end could be here (if EP0)
|
|
}
|
|
if(endpoints[n].func) endpoints[n].func();
|
|
}
|
|
if(USB->ISTR & USB_ISTR_SUSP){ // suspend -> still no connection, may sleep
|
|
usbON = 0;
|
|
USB->CNTR |= USB_CNTR_FSUSP | USB_CNTR_LP_MODE;
|
|
USB->ISTR = ~USB_ISTR_SUSP;
|
|
}
|
|
if(USB->ISTR & USB_ISTR_WKUP){ // wakeup
|
|
USB->CNTR &= ~(USB_CNTR_FSUSP | USB_CNTR_LP_MODE); // clear suspend flags
|
|
USB->ISTR = ~USB_ISTR_WKUP;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* Write data to EP buffer (called from IRQ handler)
|
|
* @param number - EP number
|
|
* @param *buf - array with data
|
|
* @param size - its size
|
|
*/
|
|
void EP_WriteIRQ(uint8_t number, const uint8_t *buf, uint16_t size){
|
|
uint8_t i;
|
|
if(size > endpoints[number].txbufsz) size = endpoints[number].txbufsz;
|
|
uint16_t N2 = (size + 1) >> 1;
|
|
// the buffer is 16-bit, so we should copy data as it would be uint16_t
|
|
uint16_t *buf16 = (uint16_t *)buf;
|
|
uint32_t *out = (uint32_t *)endpoints[number].tx_buf;
|
|
for(i = 0; i < N2; ++i, ++out){
|
|
*out = buf16[i];
|
|
}
|
|
USB_BTABLE->EP[number].USB_COUNT_TX = size;
|
|
}
|
|
|
|
/**
|
|
* Write data to EP buffer (called outside IRQ handler)
|
|
* @param number - EP number
|
|
* @param *buf - array with data
|
|
* @param size - its size
|
|
*/
|
|
void EP_Write(uint8_t number, const uint8_t *buf, uint16_t size){
|
|
EP_WriteIRQ(number, buf, size);
|
|
uint16_t status = KEEP_DTOG(USB->EPnR[number]);
|
|
// keep DTOGs, clear CTR_TX & set TX VALID to start transmission
|
|
USB->EPnR[number] = (status & ~(USB_EPnR_CTR_TX)) ^ USB_EPnR_STAT_TX;
|
|
}
|
|
|
|
/*
|
|
* Copy data from EP buffer into user buffer area
|
|
* @param *buf - user array for data
|
|
* @return amount of data read
|
|
*/
|
|
int EP_Read(uint8_t number, uint16_t *buf){
|
|
int sz = endpoints[number].rx_cnt;
|
|
if(!sz) return 0;
|
|
endpoints[number].rx_cnt = 0;
|
|
int n = (sz + 1) >> 1;
|
|
uint32_t *in = (uint32_t *)endpoints[number].rx_buf;
|
|
if(n){
|
|
for(int i = 0; i < n; ++i, ++in)
|
|
buf[i] = *(uint16_t*)in;
|
|
}
|
|
return sz;
|
|
}
|
|
|