mirror of
https://github.com/eddyem/stm32samples.git
synced 2025-12-06 18:55:13 +03:00
186 lines
7.2 KiB
C
186 lines
7.2 KiB
C
/*
|
|
* This file is part of the Chiller project.
|
|
* Copyright 2018 Edward V. Emelianov <edward.emelianoff@gmail.com>.
|
|
*
|
|
* This program is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
#include "hardware.h"
|
|
#include "usart.h"
|
|
#include "adc.h"
|
|
|
|
static inline void iwdg_setup(){
|
|
/* Enable the peripheral clock RTC */
|
|
/* (1) Enable the LSI (40kHz) */
|
|
/* (2) Wait while it is not ready */
|
|
RCC->CSR |= RCC_CSR_LSION; /* (1) */
|
|
while((RCC->CSR & RCC_CSR_LSIRDY) != RCC_CSR_LSIRDY); /* (2) */
|
|
/* Configure IWDG */
|
|
/* (1) Activate IWDG (not needed if done in option bytes) */
|
|
/* (2) Enable write access to IWDG registers */
|
|
/* (3) Set prescaler by 64 (1.6ms for each tick) */
|
|
/* (4) Set reload value to have a rollover each 1s */
|
|
/* (5) Check if flags are reset */
|
|
/* (6) Refresh counter */
|
|
IWDG->KR = IWDG_START; /* (1) */
|
|
IWDG->KR = IWDG_WRITE_ACCESS; /* (2) */
|
|
IWDG->PR = IWDG_PR_PR_1; /* (3) */
|
|
IWDG->RLR = 625; /* (4) */
|
|
while(IWDG->SR); /* (5) */
|
|
IWDG->KR = IWDG_REFRESH; /* (6) */
|
|
}
|
|
|
|
|
|
static inline void adc_setup(){
|
|
uint16_t ctr = 0; // 0xfff0 - more than 1.3ms
|
|
// Enable clocking
|
|
/* (1) Enable the peripheral clock of the ADC */
|
|
/* (2) Start HSI14 RC oscillator */
|
|
/* (3) Wait HSI14 is ready */
|
|
RCC->APB2ENR |= RCC_APB2ENR_ADC1EN; /* (1) */
|
|
RCC->CR2 |= RCC_CR2_HSI14ON; /* (2) */
|
|
while ((RCC->CR2 & RCC_CR2_HSI14RDY) == 0 && ++ctr < 0xfff0){}; /* (3) */
|
|
// calibration
|
|
/* (1) Ensure that ADEN = 0 */
|
|
/* (2) Clear ADEN */
|
|
/* (3) Launch the calibration by setting ADCAL */
|
|
/* (4) Wait until ADCAL=0 */
|
|
if ((ADC1->CR & ADC_CR_ADEN) != 0){ /* (1) */
|
|
ADC1->CR &= (uint32_t)(~ADC_CR_ADEN); /* (2) */
|
|
}
|
|
ADC1->CR |= ADC_CR_ADCAL; /* (3) */
|
|
ctr = 0; // ADC calibration time is 5.9us
|
|
while ((ADC1->CR & ADC_CR_ADCAL) != 0 && ++ctr < 0xfff0){}; /* (4) */
|
|
// enable ADC
|
|
ctr = 0;
|
|
do{
|
|
ADC1->CR |= ADC_CR_ADEN;
|
|
}while ((ADC1->ISR & ADC_ISR_ADRDY) == 0 && ++ctr < 0xfff0);
|
|
// configure ADC
|
|
/* (1) Select HSI14 by writing 00 in CKMODE (reset value) */
|
|
/* (2) Select the continuous mode */
|
|
/* (3) Select CHSEL0..3 - ADC inputs, 16,17 - t. sensor and vref */
|
|
/* (4) Select a sampling mode of 111 i.e. 239.5 ADC clk to be greater than 17.1us */
|
|
/* (5) Wake-up the VREFINT and Temperature sensor (only for VBAT, Temp sensor and VRefInt) */
|
|
// ADC1->CFGR2 &= ~ADC_CFGR2_CKMODE; /* (1) */
|
|
ADC1->CFGR1 |= ADC_CFGR1_CONT; /* (2)*/
|
|
ADC1->CHSELR = ADC_CHSELR_CHSEL0 | ADC_CHSELR_CHSEL1 | ADC_CHSELR_CHSEL2 |
|
|
ADC_CHSELR_CHSEL3 | ADC_CHSELR_CHSEL16 | ADC_CHSELR_CHSEL17; /* (3)*/
|
|
ADC1->SMPR |= ADC_SMPR_SMP_0 | ADC_SMPR_SMP_1 | ADC_SMPR_SMP_2; /* (4) */
|
|
ADC->CCR |= ADC_CCR_TSEN | ADC_CCR_VREFEN; /* (5) */
|
|
// configure DMA for ADC
|
|
// DMA for AIN
|
|
/* (1) Enable the peripheral clock on DMA */
|
|
/* (2) Enable DMA transfer on ADC and circular mode */
|
|
/* (3) Configure the peripheral data register address */
|
|
/* (4) Configure the memory address */
|
|
/* (5) Configure the number of DMA tranfer to be performs on DMA channel 1 */
|
|
/* (6) Configure increment, size, interrupts and circular mode */
|
|
/* (7) Enable DMA Channel 1 */
|
|
RCC->AHBENR |= RCC_AHBENR_DMA1EN; /* (1) */
|
|
ADC1->CFGR1 |= ADC_CFGR1_DMAEN | ADC_CFGR1_DMACFG; /* (2) */
|
|
DMA1_Channel1->CPAR = (uint32_t) (&(ADC1->DR)); /* (3) */
|
|
DMA1_Channel1->CMAR = (uint32_t)(ADC_array); /* (4) */
|
|
DMA1_Channel1->CNDTR = NUMBER_OF_ADC_CHANNELS * 9; /* (5) */
|
|
DMA1_Channel1->CCR |= DMA_CCR_MINC | DMA_CCR_MSIZE_0 | DMA_CCR_PSIZE_0 | DMA_CCR_CIRC; /* (6) */
|
|
DMA1_Channel1->CCR |= DMA_CCR_EN; /* (7) */
|
|
ADC1->CR |= ADC_CR_ADSTART; /* start the ADC conversions */
|
|
}
|
|
|
|
/**
|
|
* @brief gpio_setup - setup GPIOs for external IO
|
|
* GPIO pinout:
|
|
* PA5 - floating input - Ef of TLE5205
|
|
* PA13 - open drain - IN1 of TLE5205
|
|
* PA14 - open drain - IN2 of TLE5205
|
|
* PF0 - floating input - water level alert
|
|
* PF1 - push-pull - external alarm
|
|
* PA0..PA3 - ADC_IN0..3
|
|
* PA4, PA6, PA7 - PWM outputs
|
|
* Registers
|
|
* MODER - input/output/alternate/analog (2 bit)
|
|
* OTYPER - 0 pushpull, 1 opendrain
|
|
* OSPEEDR - x0 low, 01 medium, 11 high
|
|
* PUPDR - no/pullup/pulldown/resr (2 bit)
|
|
* IDR - input
|
|
* ODR - output
|
|
* BSRR - 0..15 - set, 16..31 - reset
|
|
* BRR - 0..15 - reset
|
|
* AFRL/AFRH - alternate functions (4 bit, AF: 0..7); L - AFR0..7, H - ARF8..15
|
|
*/
|
|
static inline void gpio_setup(){
|
|
// Enable clocks to the GPIO subsystems
|
|
RCC->AHBENR |= RCC_AHBENR_GPIOAEN | RCC_AHBENR_GPIOFEN;
|
|
GPIOA->MODER =
|
|
GPIO_MODER_MODER13_O | GPIO_MODER_MODER14_O |
|
|
GPIO_MODER_MODER4_AF | GPIO_MODER_MODER6_AF |
|
|
GPIO_MODER_MODER7_AF |
|
|
GPIO_MODER_MODER0_AI | GPIO_MODER_MODER1_AI |
|
|
GPIO_MODER_MODER2_AI | GPIO_MODER_MODER3_AI;
|
|
GPIOA->OTYPER = 3 << 13; // 13/14 opendrain
|
|
GPIOF->MODER = GPIO_MODER_MODER1_O;
|
|
// alternate functions:
|
|
// PA4 - TIM14_CH1 (AF4)
|
|
// PA6 - TIM16_CH1 (AF5), PA7 - TIM17_CH1 (AF5)
|
|
GPIOA->AFR[0] = (GPIOA->AFR[0] &~ (GPIO_AFRL_AFRL4 | GPIO_AFRL_AFRL6 | GPIO_AFRL_AFRL7)) \
|
|
| (4 << (4 * 4)) | (5 << (6 * 4)) | (5 << (7 * 4));
|
|
// PB1 - TIM3_CH4 (AF1)
|
|
GPIOB->AFR[0] = (GPIOB->AFR[0] &~ (GPIO_AFRL_AFRL1)) | (1 << (1 * 4));
|
|
}
|
|
|
|
static inline void timers_setup(){
|
|
// timer 3 - flow sensor
|
|
// timer 14 - cooler PWM
|
|
// timer 16 - heater PWM
|
|
// timer 17 - pump PWM
|
|
RCC->APB1ENR |= RCC_APB1ENR_TIM3EN | RCC_APB1ENR_TIM14EN; // enable clocking for timers 3 and 14
|
|
RCC->APB2ENR |= RCC_APB2ENR_TIM16EN | RCC_APB2ENR_TIM17EN; // & timers 16/17
|
|
// PWM mode 1 (active -> inactive)
|
|
TIM14->CCMR1 = TIM_CCMR1_OC1M_2 | TIM_CCMR1_OC1M_1;
|
|
TIM16->CCMR1 = TIM_CCMR1_OC1M_2 | TIM_CCMR1_OC1M_1;
|
|
TIM17->CCMR1 = TIM_CCMR1_OC1M_2 | TIM_CCMR1_OC1M_1;
|
|
// frequency
|
|
TIM14->PSC = 59; // 0.8MHz for 3kHz PWM
|
|
TIM16->PSC = 18749; // 2.56kHz for 10Hz PWM
|
|
TIM17->PSC = 5; // 8MHz for 31kHz PWM
|
|
// ARR for 8-bit PWM
|
|
TIM14->ARR = 254;
|
|
TIM16->ARR = 254;
|
|
TIM17->ARR = 254;
|
|
// start in OFF state
|
|
// TIM14->CCR1 = 0; and so on
|
|
// enable main output
|
|
TIM14->BDTR |= TIM_BDTR_MOE;
|
|
TIM16->BDTR |= TIM_BDTR_MOE;
|
|
TIM17->BDTR |= TIM_BDTR_MOE;
|
|
// enable PWM output
|
|
TIM14->CCER = TIM_CCER_CC1E;
|
|
TIM16->CCER = TIM_CCER_CC1E;
|
|
TIM17->CCER = TIM_CCER_CC1E;
|
|
// enable timers
|
|
TIM14->CR1 |= TIM_CR1_CEN;
|
|
TIM16->CR1 |= TIM_CR1_CEN;
|
|
TIM17->CR1 |= TIM_CR1_CEN;
|
|
}
|
|
|
|
|
|
|
|
void hw_setup(){
|
|
sysreset();
|
|
gpio_setup();
|
|
adc_setup();
|
|
timers_setup();
|
|
USART1_config();
|
|
iwdg_setup();
|
|
}
|