stm32samples/F3:F303/Multistepper/steppers.c

/*
 * This file is part of the multistepper project.
 * Copyright 2023 Edward V. Emelianov <edward.emelianoff@gmail.com>.
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */

#include "flash.h"
#include "hardware.h"
#include "pdnuart.h"
#include "proto.h"
#include "steppers.h"
#include "strfunc.h"
#include "usb.h"

// goto zero stages
typedef enum{
    M0RELAX,        // normal moving
    M0FAST,         // fast move to zero
    M0SLOW          // slowest move from ESW
} mvto0state;

#ifdef EBUG
static uint8_t stp[MOTORSNO] = {0};
#endif

// motors' direction: 1 for positive, -1 for negative (we need it as could be reverse)
static int8_t motdir[MOTORSNO];
// current position (in steps) by STP counter
static volatile int32_t stppos[MOTORSNO] = {0};
// previous position when check (set to current in start of moving)
static int32_t prevstppos[MOTORSNO];
// target stepper position
static int32_t targstppos[MOTORSNO] = {0};
// position to start deceleration
static int32_t decelstartpos[MOTORSNO];
// ESW reaction - local copy
static uint8_t ESW_reaction[MOTORSNO];

// current speed
static uint16_t curspeed[MOTORSNO];
static uint16_t startspeed[MOTORSNO]; // speed when deceleration starts
// ==1 to stop @ nearest step
static uint8_t stopflag[MOTORSNO];
// motor state
static stp_state state[MOTORSNO];
// move to zero state
static mvto0state mvzerostate[MOTORSNO];

// lowest ARR value (highest speed), highest (lowest speed)
//static uint16_t stphighARR[MOTORSNO];
// microsteps=1<<ustepsshift
static uint16_t ustepsshift[MOTORSNO];
// amount of steps for full acceleration/deceleration
static uint32_t accdecsteps[MOTORSNO];

// time when acceleration or deceleration starts
static uint32_t Taccel[MOTORSNO] = {0};

// recalculate ARR according to new speed
TRUE_INLINE void recalcARR(int i){
    uint32_t ARR = (((PCLK/(MOTORTIM_PSC+1)) / curspeed[i]) >> ustepsshift[i]) - 1;
    if(ARR < MOTORTIM_ARRMIN) ARR = MOTORTIM_ARRMIN;
    else if(ARR > 0xffff) ARR = 0xffff;
    mottimers[i]->ARR = ARR;
    curspeed[i] = (((PCLK/(MOTORTIM_PSC+1)) / (ARR+1)) >> ustepsshift[i]); // recalculate speed due to new val
}

// update stepper's settings
void update_stepper(uint8_t i){
    if(i >= MOTORSNO) return;
    accdecsteps[i] = (the_conf.maxspd[i] * the_conf.maxspd[i]) / the_conf.accel[i] / 2;
    ustepsshift[i] = MSB(the_conf.microsteps[i]);
    ESW_reaction[i] = the_conf.ESW_reaction[i];
    switch(the_conf.motflags[i].drvtype){
        case DRVTYPE_UART:
            pdnuart_init(i);
        break;
        default:
        break;
    }
}

// run this function after each steppers parameters changing
void init_steppers(){
    mottimers_setup(); // reinit timers
    // init variables
    for(int i = 0; i < MOTORSNO; ++i){
        stopflag[i] = 0;
        motdir[i] = 0;
        curspeed[i] = 0;
        state[i] = STP_RELAX;
        if(!the_conf.motflags[i].donthold) MOTOR_EN(i);
        else MOTOR_DIS(i);
        update_stepper(i);
    }
}

// set absolute position of motor `i`
errcodes setmotpos(uint8_t i, int32_t position){
    if(state[i] != STP_RELAX) return ERR_CANTRUN;
    if(position > (int32_t)the_conf.maxsteps[i] || position < -(int32_t)the_conf.maxsteps[i])
        return ERR_BADVAL; // too big position or zero
    stppos[i] = position;
    return ERR_OK;
}

// get current position
errcodes getpos(uint8_t i, int32_t *position){
    *position = stppos[i];
    return ERR_OK;
}

errcodes getremainsteps(uint8_t i, int32_t *position){
    *position = targstppos[i] - stppos[i];
    return ERR_OK;
}

// calculate acceleration/deceleration parameters for motor i
static void calcacceleration(uint8_t i){
    switch(state[i]){ // do nothing in case of error/stopping
        case STP_ERR:
        case STP_RELAX:
        case STP_STALL:
            return;
        break;
        default:
        break;
    }
    int32_t delta = targstppos[i] - stppos[i];
    if(delta > 0){ // positive direction
        if(delta > 2*(int32_t)accdecsteps[i]){ // can move by trapezoid
            decelstartpos[i] = targstppos[i] - accdecsteps[i];
        }else{ // triangle speed profile
            decelstartpos[i] = stppos[i] + delta/2;
        }
        if(the_conf.motflags[i].reverse) MOTOR_CCW(i);
        else MOTOR_CW(i);
    }else{ // negative direction
        delta = -delta;
        if(delta > 2*(int32_t)accdecsteps[i]){ // can move by trapezoid
            decelstartpos[i] = targstppos[i] + accdecsteps[i];
        }else{ // triangle speed profile
            decelstartpos[i] = stppos[i] - delta/2;
        }
        if(the_conf.motflags[i].reverse) MOTOR_CW(i);
        else MOTOR_CCW(i);
    }
    if(state[i] != STP_MVSLOW){
        DBG("->accel");
        state[i] = STP_ACCEL;
    }
    startspeed[i] = curspeed[i];
    Taccel[i] = Tms;
    recalcARR(i);
}

// check if end-switch is blocking the moving of i'th motor
// @return TRUE if motor can't move
static int esw_block(uint8_t i){
    int ret = FALSE;
    uint8_t s = ESW_state(i);
    if(s){ // ESW active
        switch(ESW_reaction[i]){
            case ESW_ANYSTOP: // stop motor in any direction
                ret = TRUE;
            break;
            case ESW_STOPMINUS: // stop only @ given direction
                if(motdir[i] == -1 && (s & 1)) ret = TRUE; // stop @ESW0
                if(motdir[i] == 1 && (s & 2)) ret = TRUE; // stop @ESW1
            break;
            default: // ESW_IGNORE
            break;
        }
    }
    return ret;
}

// move to absolute position
errcodes motor_absmove(uint8_t i, int32_t newpos){
    //if(i >= MOTORSNO) return ERR_BADPAR; // bad motor number
    int8_t dir = (newpos > stppos[i]) ? 1 : -1;
    switch(state[i]){
        case STP_ERR:
        case STP_RELAX:
        break;
        case STP_STALL:
        break;
        default: // moving state
            DBG("Is moving");
            return ERR_CANTRUN;
    }
    if(newpos > (int32_t)the_conf.maxsteps[i] || newpos < -(int32_t)the_conf.maxsteps[i] || newpos == stppos[i]){
        DBG("Too much steps");
        return ERR_BADVAL; // too big position or zero
    }
    motdir[i] = dir; // should be before limit switch check
    if(esw_block(i)){
        DBG("Block by ESW");
        return ERR_CANTRUN; // on end-switch
    }
    stopflag[i] = 0;
    targstppos[i] = newpos;
    prevstppos[i] = stppos[i];
    curspeed[i] = the_conf.minspd[i];
    state[i] = STP_ACCEL;
    calcacceleration(i);
#ifdef EBUG
    USB_sendstr("MOTOR"); USB_putbyte('0'+i);
    USB_sendstr(" targstppos="); printi(targstppos[i]);
    USB_sendstr(", decelstart="); printi(decelstartpos[i]);
    USB_sendstr(", accdecsteps="); printu(accdecsteps[i]); newline();
#endif
    MOTOR_EN(i);
    mottimers[i]->CR1 |= TIM_CR1_CEN; // start timer
    return ERR_OK;
}

// move i'th motor for relsteps
errcodes motor_relmove(uint8_t i, int32_t relsteps){
    return motor_absmove(i, stppos[i] + relsteps);
}

errcodes motor_relslow(uint8_t i, int32_t relsteps){
    errcodes e = motor_absmove(i, stppos[i] + relsteps);
    if(ERR_OK == e){
        DBG("-> MVSLOW");
        state[i] = STP_MVSLOW;
    }
    return e;
}

// emergency stop and clear errors
void emstopmotor(uint8_t i){
    switch(state[i]){
        case STP_ERR:   // clear error state
        case STP_STALL:
            DBG("-> RELAX");
            state[i] = STP_RELAX;
        // fallthrough
        case STP_RELAX: // do nothing in stopping state
            return;
        default:
        break;
    }
    stopflag[i] = 1;
}

stp_state getmotstate(uint8_t i){
    return state[i];
}

// count steps @tim 14/15/16
void addmicrostep(uint8_t i){
    static volatile uint16_t microsteps[MOTORSNO] = {0}; // current microsteps position
    if(esw_block(i)) stopflag[i] = 1; // turn on stop flag if end-switch was active
    if(++microsteps[i] == the_conf.microsteps[i]){
        microsteps[i] = 0;
        stppos[i] += motdir[i];
        uint8_t stop_at_pos = 0;
        if(motdir[i] > 0){
            if(stppos[i] >= targstppos[i]){ // reached stop position
                stop_at_pos = 1;
            }
        }else{
            if(stppos[i] <= targstppos[i]){
                stop_at_pos = 1;
            }
        }
        if(stopflag[i] || stop_at_pos){ // stop NOW
            mottimers[i]->CR1 &= ~TIM_CR1_CEN; // stop timer
            if(stopflag[i]) targstppos[i] = stppos[i]; // keep position (for keep flag)
            stopflag[i] = 0;
            if(the_conf.motflags[i].donthold)
                MOTOR_DIS(i); // turn off power
            state[i] = STP_RELAX;
#ifdef EBUG
            stp[i] = 1;
#endif
        }
    }
}

#ifdef EBUG
#define TODECEL() do{state[i] = STP_DECEL;  \
        startspeed[i] = curspeed[i];        \
        Taccel[i] = Tms;                    \
        USB_sendstr("MOTOR"); USB_putbyte('0'+i);   \
        USB_sendstr("  -> DECEL@"); printi(stppos[i]); USB_sendstr(", V="); printu(curspeed[i]); newline(); \
        }while(0)
#else
#define TODECEL() do{state[i] = STP_DECEL;  \
        startspeed[i] = curspeed[i];        \
        Taccel[i] = Tms;                    \
        }while(0)
#endif

// check state of i`th stepper
static void chkstepper(int i){
    int32_t i32;
    static uint8_t stopctr[MOTORSNO] = {0}; // counters for encoders/position zeroing after stopping @ esw
#ifdef EBUG
    if(stp[i]){
        stp[i] = 0;
        // motor state could be changed outside of interrupt, so return it to relax
        state[i] = STP_RELAX;
        USB_sendstr("MOTOR"); USB_putbyte('0'+i); USB_sendstr(" stop @"); printi(stppos[i]);
        USB_sendstr(", V="); printu(curspeed[i]);
        USB_sendstr(", curstate="); printu(state[i]); newline();
    }
#endif
    switch(state[i]){
        case STP_ACCEL: // acceleration to max speed
            i32 = the_conf.minspd[i] + (the_conf.accel[i] * (Tms - Taccel[i])) / 1000;
            if(i32 >= the_conf.maxspd[i]){ // max speed reached -> move with it
                curspeed[i] = the_conf.maxspd[i];
                state[i] = STP_MOVE;
#ifdef EBUG
                USB_sendstr("MOTOR"); USB_putbyte('0'+i);
                USB_sendstr("  -> MOVE@"); printi(stppos[i]); USB_sendstr(", V="); printu(curspeed[i]); newline();
#endif
            }else{ // increase speed
                curspeed[i] = i32;
            }
            recalcARR(i);
            // check position for triangle profile
            if(motdir[i] > 0){
                if(stppos[i] >= decelstartpos[i]){ // reached end of acceleration
                    TODECEL();
                }
            }else{
                if(stppos[i] <= decelstartpos[i]){
                    TODECEL();
                }
            }
        break;
        case STP_MOVE: // move @ constant speed until need to decelerate
            // check position
            if(motdir[i] > 0){
                if(stppos[i] >= decelstartpos[i]){ // reached start of deceleration
                    TODECEL();
                }
            }else{
                if(stppos[i] <= decelstartpos[i]){
                    TODECEL();
                }
            }
        break;
        case STP_DECEL:
            //newspeed = curspeed[i] - dV[i];
            i32 = startspeed[i] - (the_conf.accel[i] * (Tms - Taccel[i])) / 1000;
            if(i32 > the_conf.minspd[i]){
                curspeed[i] = i32;
            }else{
                curspeed[i] = the_conf.minspd[i];
                state[i] = STP_MVSLOW;
#ifdef EBUG
                USB_sendstr("MOTOR"); USB_putbyte('0'+i);
                USB_sendstr("  -> MVSLOW@"); printi(stppos[i]); newline();
#endif
            }
            recalcARR(i);
        break;
        default: // do nothing, check mvzerostate
        break;
    }
    switch(mvzerostate[i]){
        case M0FAST:
            if(state[i] == STP_RELAX || state[i] == STP_STALL){ // stopped -> move to +
#ifdef EBUG
                USB_putbyte('M'); USB_putbyte('0'+i); USB_sendstr("FAST: motor stopped\n");
#endif
                if(ERR_OK != motor_relslow(i, 1000)){
#ifdef EBUG
                    USND("Can't move");
#endif
                    DBG("->ERR");
                    state[i] = STP_ERR;
                    mvzerostate[i] = M0RELAX;
                    ESW_reaction[i] = the_conf.ESW_reaction[i];
                }else{
                    mvzerostate[i] = M0SLOW;
                    stopctr[i] = 0;
                }
            }
        break;
        case M0SLOW:
            if(0 == ESW_state(i)){ // moved out of limit switch - can stop
                emstopmotor(i);
            }
            if((state[i] == STP_RELAX || state[i] == STP_STALL) && ++stopctr[i] > 5){ // wait at least 50ms
#ifdef EBUG
                USB_putbyte('M'); USB_putbyte('0'+i); USND("SLOW: motor stopped");
#endif
                ESW_reaction[i] = the_conf.ESW_reaction[i];
                prevstppos[i] = targstppos[i] = stppos[i] = 0;
                mvzerostate[i] = M0RELAX;
            }
        break;
        default: // RELAX, STALL: do nothing
        break;
    }
}

errcodes motor_goto0(uint8_t i){
    errcodes e = motor_absmove(i, -the_conf.maxsteps[i]);
    if(ERR_OK != e){
        if(!ESW_state(i)) return e; // not @ limit switch -> error
    }else  ESW_reaction[i] = ESW_STOPMINUS;
    mvzerostate[i] = M0FAST;
    return e;
}

// smooth motor stopping
void stopmotor(uint8_t i){
    switch(state[i]){
        case STP_MVSLOW: // immeditially stop on slowest speed
            stopflag[i] = 1;
            return;
        break;
        case STP_MOVE:  // stop only in moving states
        case STP_ACCEL:
        break;
        default: // do nothing in other states
            return;
    }
    int32_t newstoppos = stppos[i]; // calculate steps need for stop (we can be @acceleration phase!)
    int32_t add = (curspeed[i] * curspeed[i]) / the_conf.accel[i] / 2;
    if(motdir[i] > 0){
        newstoppos += add;
        if(newstoppos < (int32_t)the_conf.maxsteps[i]) targstppos[i] = newstoppos;
    }else{
        newstoppos -= add;
        if(newstoppos > -((int32_t)the_conf.maxsteps[i])) targstppos[i] = newstoppos;
    }
    TODECEL();
}

void process_steppers(){
    static uint32_t Tlast = 0;
    if(Tms - Tlast < MOTCHKINTERVAL) return; // hit every 10ms
    Tlast = Tms;
    for(int i = 0; i < MOTORSNO; ++i){
        chkstepper(i);
    }
}

uint8_t geteswreact(uint8_t i){
    return ESW_reaction[i];
}