mirror of
https://github.com/eddyem/stm32samples.git
synced 2025-12-07 19:25:19 +03:00
150 lines
8.4 KiB
Markdown
150 lines
8.4 KiB
Markdown
BTA CANbus node controller
|
|
====================================
|
|
|
|
# Pinout
|
|
|
|
PP - push-pull, OD - open drain, I - floating input, A - analog input, AFn - alternate function number n.
|
|
1 - active high, 0 - active low.
|
|
### Sorted by pin number
|
|
|
|
|**Pin #**|**Pin name** | **function**| **settings**| **comment** |
|
|
|---------|-------------|-------------|-------------|------------------|
|
|
| 1 | VBAT | 3v3 | | |
|
|
| 2 | PC13 | buzzer | PP1 | |
|
|
| 3 | PC14 | relay | PP1 | |
|
|
| 4 | PC15 | usb pullup | PP1 | |
|
|
| 5 | PF0 | OSCIN | | |
|
|
| 6 | PF1 | OSCOUT | | |
|
|
| 7 | NRST | reset | | |
|
|
| 8 | VSSA | gnd | | |
|
|
| 9 | VDDA | 3v3 | | |
|
|
| 10 | PA0 | AIN0 | A | |
|
|
| 11 | PA1 | AIN1 | A | |
|
|
| 12 | PA2 | ANI2 | A | |
|
|
| 13 | PA3 | AIN3 | A | |
|
|
| 14 | PA4 | DIN | I | mul0/1 input |
|
|
| 15 | PA5 | DEN0 | PP0 | enable mul0 |
|
|
| 16 | PA6 | DEN1 | PP0 | enable mul1 |
|
|
| 17 | PA7 | PWM | AF1 | TIM17CH1 PWM |
|
|
| 18 | PB0 | ADDR0 | PP | MUL address |
|
|
| 19 | PB1 | ADDR1 | PP | selection |
|
|
| 20 | PB2 | ADDR2 | PP | |
|
|
| 21 | PB10 | PB10 | gpio | reserved gpio |
|
|
| 22 | PB11 | PB11 | gpio | reserved gpio |
|
|
| 23 | VSS | gnd | | |
|
|
| 24 | VDD | 3v3 | | |
|
|
| 25 | PB12 | SPI2 NSS | AF5 | isolated |
|
|
| 26 | PB13 | SPI2 SCK | AF5 | external |
|
|
| 27 | PB14 | SPI2 MISO | AF5 | SPI |
|
|
| 28 | PB15 | SPI2 MOSI | AF5 | |
|
|
| 29 | PA8 | PA8 | gpio | reserved gpio |
|
|
| 30 | PA9 | USART1 TX | AF7 | RS-422 interface |
|
|
| 31 | PA10 | USART1 RX | AF7 | (opt) |
|
|
| 32 | PA11 | USB DM | AF14 | |
|
|
| 33 | PA12 | USB DP | AF14 | |
|
|
| 34 | PA13 | SWDIO | AF0 | |
|
|
| 35 | VSS | gnd | | |
|
|
| 36 | VDD | 3v3 | | |
|
|
| 37 | PA14 | SWCLK | AF0 | |
|
|
| 38 | PA15 | PA15 | gpio | reserved gpio |
|
|
| 39 | PB3 | SPI1 SCK | AF5 | SSI interface |
|
|
| 40 | PB4 | SPI1 MISO | AF5 | (opt) |
|
|
| 41 | PB5 | X | | |
|
|
| 42 | PB6 | I2C1 SCL | AF4 | non-isolated |
|
|
| 43 | PB7 | I2C1 SDA | AF4 | ext. I2C |
|
|
| 44 | BOOT0 | boot | | |
|
|
| 45 | PB8 | CAN RX | AF9 | |
|
|
| 46 | PB9 | CAN TX | AF9 | |
|
|
| 47 | VSS | gnd | | |
|
|
| 48 | VDD | 3v3 | | |
|
|
|---------|-------------|-------------|-------------|------------------|
|
|
|
|
|
|
### Sorted by port
|
|
// sort -Vk4 Readme.md
|
|
|
|
|**Pin #**|**Pin name** | **function**| **settings**| **comment** |
|
|
|---------|-------------|-------------|-------------|------------------|
|
|
| 44 | BOOT0 | boot | | |
|
|
| 7 | NRST | reset | | |
|
|
| 10 | PA0 | AIN0 | A | |
|
|
| 11 | PA1 | AIN1 | A | |
|
|
| 12 | PA2 | ANI2 | A | |
|
|
| 13 | PA3 | AIN3 | A | |
|
|
| 14 | PA4 | DIN | I | mul0/1 input |
|
|
| 15 | PA5 | DEN0 | PP0 | enable mul0 |
|
|
| 16 | PA6 | DEN1 | PP0 | enable mul1 |
|
|
| 17 | PA7 | PWM | AF1 | TIM17CH1 PWM |
|
|
| 29 | PA8 | PA8 | gpio | reserved gpio |
|
|
| 30 | PA9 | USART1 TX | AF7 | RS-422 interface |
|
|
| 31 | PA10 | USART1 RX | AF7 | (opt) |
|
|
| 32 | PA11 | USB DM | AF14 | |
|
|
| 33 | PA12 | USB DP | AF14 | |
|
|
| 34 | PA13 | SWDIO | AF0 | |
|
|
| 37 | PA14 | SWCLK | AF0 | |
|
|
| 38 | PA15 | PA15 | gpio | reserved gpio |
|
|
| 18 | PB0 | ADDR0 | PP | MUL address |
|
|
| 19 | PB1 | ADDR1 | PP | selection |
|
|
| 20 | PB2 | ADDR2 | PP | |
|
|
| 39 | PB3 | SPI1 SCK | AF5 | SSI interface |
|
|
| 40 | PB4 | SPI1 MISO | AF5 | (opt) |
|
|
| 41 | PB5 | X | | |
|
|
| 42 | PB6 | I2C1 SCL | AF4 | non-isolated |
|
|
| 43 | PB7 | I2C1 SDA | AF4 | ext. I2C |
|
|
| 45 | PB8 | CAN RX | AF9 | |
|
|
| 46 | PB9 | CAN TX | AF9 | |
|
|
| 21 | PB10 | PB10 | gpio | reserved gpio |
|
|
| 22 | PB11 | PB11 | gpio | reserved gpio |
|
|
| 25 | PB12 | SPI2 NSS | AF5 | isolated |
|
|
| 26 | PB13 | SPI2 SCK | AF5 | external |
|
|
| 27 | PB14 | SPI2 MISO | AF5 | SPI |
|
|
| 28 | PB15 | SPI2 MOSI | AF5 | |
|
|
| 2 | PC13 | buzzer | PP1 | |
|
|
| 3 | PC14 | relay | PP1 | |
|
|
| 4 | PC15 | usb pullup | PP1 | |
|
|
| 5 | PF0 | OSCIN | | |
|
|
| 6 | PF1 | OSCOUT | | |
|
|
| 1 | VBAT | 3v3 | | |
|
|
| 9 | VDDA | 3v3 | | |
|
|
| 24 | VDD | 3v3 | | |
|
|
| 36 | VDD | 3v3 | | |
|
|
| 48 | VDD | 3v3 | | |
|
|
| 8 | VSSA | gnd | | |
|
|
| 23 | VSS | gnd | | |
|
|
| 35 | VSS | gnd | | |
|
|
| 47 | VSS | gnd | | |
|
|
|---------|-------------|-------------|-------------|------------------|
|
|
|
|
# DMA usage
|
|
## DMA1
|
|
|
|
Channel1 - ADC1.
|
|
|
|
## DMA2
|
|
|
|
# Text command protocol
|
|
Text commands have format of `parameter[number][=setter]`. Where
|
|
- *parameter* is any possible command,
|
|
- *number* is its number (if need, like esw5),
|
|
- *setter* is new value to set parameter.
|
|
|
|
Without setter command works like getter or run some routine.
|
|
|
|
**All commands should have codes more than '@'.**
|
|
|
|
## Text commands list
|
|
|
|
|
|
# CAN bus command protocol
|
|
All commands have variable length format: e.g. you don't need to send 8 random data bytes for commands like
|
|
`reset`, which needs no arguments and couldn't be a setter. So, starting from 1st byte in data packet:
|
|
|
|
**0** - command code (L)
|
|
**1** - command code (H) - uint16_t
|
|
**2** - command parameter, 0..127 (setter have 1 in MSB)
|
|
**3** - error code (only in answers)
|
|
**4..7** - data (int32_t, little endian)
|
|
|
|
|
|
## CAN bus command codes
|