mirror of
https://github.com/eddyem/stm32samples.git
synced 2025-12-06 02:35:23 +03:00
195 lines
6.2 KiB
C
195 lines
6.2 KiB
C
/*
|
|
* geany_encoding=koi8-r
|
|
* i2c.c
|
|
*
|
|
* Copyright 2017 Edward V. Emelianov <eddy@sao.ru, edward.emelianoff@gmail.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
|
|
* MA 02110-1301, USA.
|
|
*
|
|
*/
|
|
#include "hardware.h"
|
|
#include "i2c.h"
|
|
#include "proto.h"
|
|
#include "usb.h"
|
|
|
|
I2C_SPEED curI2Cspeed = LOW_SPEED;
|
|
extern volatile uint32_t Tms;
|
|
static uint32_t cntr;
|
|
volatile uint8_t I2C_scan_mode = 0; // == 1 when I2C is in scan mode
|
|
static uint8_t i2caddr = I2C_ADDREND; // not active
|
|
|
|
void i2c_setup(I2C_SPEED speed){
|
|
if(speed >= CURRENT_SPEED){
|
|
speed = curI2Cspeed;
|
|
}else{
|
|
curI2Cspeed = speed;
|
|
}
|
|
I2C1->CR1 = 0;
|
|
/*
|
|
* GPIO Resources: I2C1_SCL - PB6, I2C1_SDA - PB7 (AF1)
|
|
*/
|
|
GPIOB->AFR[0] = (GPIOB->AFR[0] & ~(GPIO_AFRL_AFRL6 | GPIO_AFRL_AFRL7)) |
|
|
1 << (6 * 4) | 1 << (7 * 4);
|
|
GPIOB->MODER = (GPIOB->MODER & ~(GPIO_MODER_MODER6 | GPIO_MODER_MODER7)) |
|
|
GPIO_MODER_MODER6_AF | GPIO_MODER_MODER7_AF;
|
|
GPIOB->OTYPER |= GPIO_OTYPER_OT_6 | GPIO_OTYPER_OT_7; // both open-drain outputs
|
|
// I2C
|
|
RCC->APB1ENR |= RCC_APB1ENR_I2C1EN; // timing
|
|
RCC->CFGR3 |= RCC_CFGR3_I2C1SW; // use sysclock for timing
|
|
if(speed == LOW_SPEED){ // 10kHz
|
|
// PRESC=B, SCLDEL=4, SDADEL=2, SCLH=0xC3, SCLL=0xB0
|
|
I2C1->TIMINGR = (0xB<<28) | (4<<20) | (2<<16) | (0xC3<<8) | (0xB0);
|
|
}else if(speed == HIGH_SPEED){ // 100kHz
|
|
I2C1->TIMINGR = (0xB<<28) | (4<<20) | (2<<16) | (0x12<<8) | (0x11);
|
|
}else{ // VERYLOW_SPEED - the lowest speed by STM register: 5.8kHz (presc = 16-1 = 15; )
|
|
I2C1->TIMINGR = (0xf<<28) | (4<<20) | (2<<16) | (0xff<<8) | (0xff);
|
|
}
|
|
I2C1->CR1 = I2C_CR1_PE;
|
|
}
|
|
|
|
|
|
/**
|
|
* write command byte to I2C
|
|
* @param addr - device address (TSYS01_ADDR0 or TSYS01_ADDR1)
|
|
* @param data - bytes to write
|
|
* @param nbytes - amount of bytes to write
|
|
* @param stop - to set STOP
|
|
* @return 0 if error
|
|
*/
|
|
static uint8_t write_i2cs(uint8_t addr, uint8_t *data, uint8_t nbytes, uint8_t stop){
|
|
cntr = Tms;
|
|
I2C1->CR1 = 0; // clear busy flag
|
|
I2C1->ICR = 0x3f38; // clear all errors
|
|
I2C1->CR1 = I2C_CR1_PE;
|
|
while(I2C1->ISR & I2C_ISR_BUSY){
|
|
IWDG->KR = IWDG_REFRESH;
|
|
if(Tms - cntr > I2C_TIMEOUT){
|
|
USND("Line busy\n");
|
|
return 0; // check busy
|
|
}}
|
|
cntr = Tms;
|
|
while(I2C1->CR2 & I2C_CR2_START){
|
|
IWDG->KR = IWDG_REFRESH;
|
|
if(Tms - cntr > I2C_TIMEOUT){
|
|
return 0; // check start
|
|
}}
|
|
//I2C1->ICR = 0x3f38; // clear all errors
|
|
I2C1->CR2 = nbytes << 16 | addr;
|
|
if(stop) I2C1->CR2 |= I2C_CR2_AUTOEND; // autoend
|
|
// now start transfer
|
|
I2C1->CR2 |= I2C_CR2_START;
|
|
for(int i = 0; i < nbytes; ++i){
|
|
cntr = Tms;
|
|
while(!(I2C1->ISR & I2C_ISR_TXIS)){ // ready to transmit
|
|
IWDG->KR = IWDG_REFRESH;
|
|
if(I2C1->ISR & I2C_ISR_NACKF){
|
|
I2C1->ICR |= I2C_ICR_NACKCF;
|
|
USND("NAK\n");
|
|
return 0;
|
|
}
|
|
if(Tms - cntr > I2C_TIMEOUT){
|
|
USND("Timeout\n");
|
|
return 0;
|
|
}
|
|
}
|
|
I2C1->TXDR = data[i]; // send data
|
|
}
|
|
// wait for data gone
|
|
while(I2C1->ISR & I2C_ISR_BUSY){
|
|
IWDG->KR = IWDG_REFRESH;
|
|
if(Tms - cntr > I2C_TIMEOUT){break;}
|
|
}
|
|
return 1;
|
|
}
|
|
|
|
uint8_t write_i2c(uint8_t addr, uint8_t *data, uint8_t nbytes){
|
|
return write_i2cs(addr, data, nbytes, 1);
|
|
}
|
|
|
|
/**
|
|
* read nbytes of data from I2C line
|
|
* `data` should be an array with at least `nbytes` length
|
|
* @return 1 if all OK, 0 if NACK or no device found
|
|
*/
|
|
static uint8_t read_i2cb(uint8_t addr, uint8_t *data, uint8_t nbytes, uint8_t busychk){
|
|
if(busychk){
|
|
cntr = Tms;
|
|
while(I2C1->ISR & I2C_ISR_BUSY){
|
|
IWDG->KR = IWDG_REFRESH;
|
|
if(Tms - cntr > I2C_TIMEOUT){
|
|
USND("Line busy\n");
|
|
return 0; // check busy
|
|
}}
|
|
}
|
|
cntr = Tms;
|
|
while(I2C1->CR2 & I2C_CR2_START){
|
|
IWDG->KR = IWDG_REFRESH;
|
|
if(Tms - cntr > I2C_TIMEOUT){
|
|
USND("No start\n");
|
|
return 0; // check start
|
|
}}
|
|
// read N bytes
|
|
I2C1->CR2 = (nbytes<<16) | addr | 1 | I2C_CR2_AUTOEND | I2C_CR2_RD_WRN;
|
|
I2C1->CR2 |= I2C_CR2_START;
|
|
uint8_t i;
|
|
for(i = 0; i < nbytes; ++i){
|
|
cntr = Tms;
|
|
while(!(I2C1->ISR & I2C_ISR_RXNE)){ // wait for data
|
|
IWDG->KR = IWDG_REFRESH;
|
|
if(I2C1->ISR & I2C_ISR_NACKF){
|
|
I2C1->ICR |= I2C_ICR_NACKCF;
|
|
USND("NAK\n");
|
|
return 0;
|
|
}
|
|
if(Tms - cntr > I2C_TIMEOUT){
|
|
USND("Timeout\n");
|
|
return 0;
|
|
}
|
|
}
|
|
*data++ = I2C1->RXDR;
|
|
}
|
|
return 1;
|
|
}
|
|
|
|
uint8_t read_i2c(uint8_t addr, uint8_t *data, uint8_t nbytes){
|
|
return read_i2cb(addr, data, nbytes, 1);
|
|
}
|
|
|
|
// read register reg
|
|
uint8_t read_i2c_reg(uint8_t addr, uint8_t reg, uint8_t *data, uint8_t nbytes){
|
|
if(!write_i2cs(addr, ®, 1, 0)) return 0;
|
|
return read_i2cb(addr, data, nbytes, 0);
|
|
}
|
|
|
|
void i2c_init_scan_mode(){
|
|
i2caddr = 0;
|
|
I2C_scan_mode = 1;
|
|
}
|
|
|
|
// return 1 if next addr is active & return in as `addr`
|
|
// if addresses are over, return 1 and set addr to I2C_NOADDR
|
|
// if scan mode inactive, return 0 and set addr to I2C_NOADDR
|
|
int i2c_scan_next_addr(uint8_t *addr){
|
|
*addr = i2caddr;
|
|
if(i2caddr == I2C_ADDREND){
|
|
*addr = I2C_ADDREND;
|
|
I2C_scan_mode = 0;
|
|
return 0;
|
|
}
|
|
if(!read_i2c_reg((i2caddr++)<<1, 0, NULL, 0)) return 0;
|
|
return 1;
|
|
}
|