/*
 * This file is part of the canonmanage project.
 * Copyright 2022 Edward V. Emelianov <edward.emelianoff@gmail.com>.
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */

#pragma once

#include <stm32f1.h>

// all data sent in big-endian format

// max length of commands buffer
#define MAXCMDLEN   (32)

// connection timeout (100ms): do nothing until this timeout
#define CONN_TIMEOUT    (100)

// pause after error before next reinit
#define REINIT_PAUSE    (5000)

// waiting for starting moving - 0.25s
#define MOVING_PAUSE    (250)

// answer for cmd "POLL"
#define CANON_POLLANS   (0xaa)

// bad focus value - 32767
#define BADFOCVAL   (0x7fff)

// maximal

typedef enum{
    CANON_LONGID    = 0x00, // long ID ???
    CANON_ID        = 0x01, // lens ID and other info ???
    CANON_REPDIA    = 0x02, // repeat last diaphragm change
    CANON_FSTOP     = 0x04, // stop focus changing
    CANON_FMAX      = 0x05, // set Foc to max
    CANON_FMIN      = 0x06, // =//= min
    CANON_POWERON   = 0x07, // turn on motors' power
    CANON_POWEROFF  = 0x08, // turn off power
    CANON_POLL      = 0x0a, // busy poll (ans 0xaa when ready or last command code)
    CANON_DIAPHRAGM = 0x13, // open/close diaphragm by given (int8_t) value of steps
    CANON_FOCMOVE   = 0x44, // move focus dial by given amount of steps (int16)
    CANON_FOCBYHANDS= 0x5e, // turn on focus move by hands (to turn off send 4,5 or 6)
    CANON_GETINFO   = 0x80, // get information
    CANON_GETREG    = 0x90, // get regulators' state
    CANON_GETMODEL  = 0xa0, // get lens (e.g. 200 == LX200)
    CANON_GETDIAL   = 0xc0, // get focus dial position in steps
    CANON_GETFOCM   = 0xc2, // get focus position in meters (not for all lenses)
} canon_commands;

typedef enum{
    LENS_DISCONNECTED,  // no lens found
    LENS_SLEEPING,      // do nothing until init
    LENS_OVERCURRENT,   // short circuit
    LENS_INITIALIZED,   // initializing process
    LENS_READY,         // ready to operate
    LENS_ERR,           // some error occured - reconnect after REINIT_PAUSE
    LENS_S_AMOUNT
} lens_state;

typedef enum{
    INI_START,          // base init done, start F initialization
    INI_FGOTOZ,         // wait until focus gone to minimal value
    INI_FPREPMAX,       // prepare to go to max
    INI_FGOTOMAX,       // go to max F value
    INI_FPREPOLD,       // prepare to go to old
    INI_FGOTOOLD,       // go to starting F value
    INI_READY,          // all OK
    INI_ERR,            // error on any init step
    INI_S_AMOUNT
} lensinit_state;

void canon_init();
void canon_proc();
int canon_diaphragm(char command);
int canon_focus(int16_t val);
int canon_sendcmd(uint8_t cmd);
int canon_asku16(uint8_t cmd);
int canon_getinfo();
uint16_t canon_getstate();