usbcan_relay works!

F0-nolib/usbcan_relay/adc.c

@@ -0,0 +1,105 @@
+/*
+ * This file is part of the canrelay project.
+ * Copyright 2021 Edward V. Emelianov <edward.emelianoff@gmail.com>.
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "adc.h"
+
+/**
+ * @brief ADC_array - array for ADC channels with median filtering:
+ * 0 & 1 - external channels (5 & 12V)
+ * 2 - internal Tsens
+ * 3 - Vref
+ */
+static uint16_t ADC_array[NUMBER_OF_ADC_CHANNELS*9];
+
+void adc_setup(){
+    uint16_t ctr = 0; // 0xfff0 - more than 1.3ms
+    ADC1->CR &= ~ADC_CR_ADEN;
+    DMA1_Channel1->CCR &= ~DMA_CCR_EN;
+    RCC->APB2ENR |= RCC_APB2ENR_ADC1EN; // Enable the peripheral clock of the ADC
+    RCC->CR2 |= RCC_CR2_HSI14ON; // Start HSI14 RC oscillator
+    while ((RCC->CR2 & RCC_CR2_HSI14RDY) == 0 && ++ctr < 0xfff0){}; // Wait HSI14 is ready
+    // calibration
+    if(ADC1->CR & ADC_CR_ADEN){ // Ensure that ADEN = 0
+        ADC1->CR &= (uint32_t)(~ADC_CR_ADEN);  // Clear ADEN
+    }
+    ADC1->CR |= ADC_CR_ADCAL; // Launch the calibration by setting ADCAL
+    ctr = 0; // ADC calibration time is 5.9us
+    while(ADC1->CR & ADC_CR_ADCAL && ++ctr < 0xfff0); // Wait until ADCAL=0
+    // enable ADC
+    ctr = 0;
+    do{
+          ADC1->CR |= ADC_CR_ADEN;
+    }while((ADC1->ISR & ADC_ISR_ADRDY) == 0 && ++ctr < 0xfff0);
+    // configure ADC
+    ADC1->CFGR1 |= ADC_CFGR1_CONT; // Select the continuous mode
+    // channels 6,7,16 and 17
+    ADC1->CHSELR =  ADC_CHSELR_CHSEL6 | ADC_CHSELR_CHSEL7 | ADC_CHSELR_CHSEL16 | ADC_CHSELR_CHSEL17;
+    ADC1->SMPR |= ADC_SMPR_SMP; // Select a sampling mode of 111 i.e. 239.5 ADC clk to be greater than 17.1us
+    ADC->CCR |= ADC_CCR_TSEN | ADC_CCR_VREFEN; // Wake-up the VREFINT and Temperature sensor
+    // configure DMA for ADC
+    RCC->AHBENR |= RCC_AHBENR_DMA1EN; // Enable the peripheral clock on DMA
+    ADC1->CFGR1 |= ADC_CFGR1_DMAEN | ADC_CFGR1_DMACFG; // Enable DMA transfer on ADC and circular mode
+    DMA1_Channel1->CPAR = (uint32_t) (&(ADC1->DR)); // Configure the peripheral data register address
+    DMA1_Channel1->CMAR = (uint32_t)(ADC_array); // Configure the memory address
+    DMA1_Channel1->CNDTR = NUMBER_OF_ADC_CHANNELS * 9; // Configure the number of DMA tranfer to be performs on DMA channel 1
+    DMA1_Channel1->CCR |= DMA_CCR_MINC | DMA_CCR_MSIZE_0 | DMA_CCR_PSIZE_0 | DMA_CCR_CIRC; // Configure increment, size, interrupts and circular mode
+    DMA1_Channel1->CCR |= DMA_CCR_EN; // Enable DMA Channel 1
+    ADC1->CR |= ADC_CR_ADSTART; // start the ADC conversions
+}
+
+/**
+ * @brief getADCval - calculate median value for `nch` channel
+ * @param nch - number of channel
+ * @return
+ */
+uint16_t getADCval(int nch){
+    int i, addr = nch;
+    register uint16_t temp;
+#define PIX_SORT(a,b) { if ((a)>(b)) PIX_SWAP((a),(b)); }
+#define PIX_SWAP(a,b) { temp=(a);(a)=(b);(b)=temp; }
+    uint16_t p[9];
+    for(i = 0; i < 9; ++i, addr += NUMBER_OF_ADC_CHANNELS) // first we should prepare array for optmed
+        p[i] = ADC_array[addr];
+    PIX_SORT(p[1], p[2]) ; PIX_SORT(p[4], p[5]) ; PIX_SORT(p[7], p[8]) ;
+    PIX_SORT(p[0], p[1]) ; PIX_SORT(p[3], p[4]) ; PIX_SORT(p[6], p[7]) ;
+    PIX_SORT(p[1], p[2]) ; PIX_SORT(p[4], p[5]) ; PIX_SORT(p[7], p[8]) ;
+    PIX_SORT(p[0], p[3]) ; PIX_SORT(p[5], p[8]) ; PIX_SORT(p[4], p[7]) ;
+    PIX_SORT(p[3], p[6]) ; PIX_SORT(p[1], p[4]) ; PIX_SORT(p[2], p[5]) ;
+    PIX_SORT(p[4], p[7]) ; PIX_SORT(p[4], p[2]) ; PIX_SORT(p[6], p[4]) ;
+    PIX_SORT(p[4], p[2]) ;
+    return p[4];
+#undef PIX_SORT
+#undef PIX_SWAP
+}
+
+// return MCU temperature (degrees of celsius * 10)
+int32_t getMCUtemp(){
+    int32_t ADval = getADCval(2);
+    int32_t temperature = (int32_t) *TEMP30_CAL_ADDR - ADval;
+    temperature *= (int32_t)(1100 - 300);
+    temperature /= (int32_t)(*TEMP30_CAL_ADDR - *TEMP110_CAL_ADDR);
+    temperature += 300;
+    return(temperature);
+}
+
+// return Vdd * 100 (V)
+uint32_t getVdd(){
+    uint32_t vdd = ((uint32_t) *VREFINT_CAL_ADDR) * (uint32_t)330; // 3.3V
+    vdd /= getADCval(3);
+    return vdd;
+}

F0-nolib/usbcan_relay/adc.h

@@ -0,0 +1,32 @@
+/*
+ * This file is part of the canrelay project.
+ * Copyright 2021 Edward V. Emelianov <edward.emelianoff@gmail.com>.
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef ADC_H
+#define ADC_H
+#include "stm32f0.h"
+
+// 2 external & 2 internal
+#define NUMBER_OF_ADC_CHANNELS (4)
+
+void adc_setup();
+int32_t getMCUtemp();
+uint32_t getVdd();
+uint16_t getADCval(int nch);
+int16_t getNTC(int nch);
+
+#endif // ADC_H

F0-nolib/usbcan_relay/buttons.c

@@ -52,10 +52,10 @@ void process_keys(){
                 break;
             }
         }else{ // released
-            if(e == EVT_PRESS || e == EVT_RELEASE){ // released
+            if(e == EVT_PRESS || e == EVT_HOLD){ // released
                 if(k->counter > PRESSTHRESHOLD) k->counter = PRESSTHRESHOLD;
                 else if((k->counter -= d) < 0){
-                    k->event = EVT_NONE; // button released
+                    k->event = EVT_RELEASE; // button released
                 }
             }
         }

F0-nolib/usbcan_relay/can.c

@@ -17,6 +17,7 @@
  */
 
 #include "can.h"
+#include "canproto.h"
 #include "hardware.h"
 #include "proto.h"
 
@@ -120,8 +121,9 @@ void CAN_setup(uint16_t speed){
     /* Enable the peripheral clock CAN */
     RCC->APB1ENR |= RCC_APB1ENR_CANEN;
     // Configure CAN
-    while((CAN->MSR & CAN_MSR_INAK)!=CAN_MSR_INAK)
-    {
+    CAN->MCR |= CAN_MCR_INRQ; // Enter CAN init mode to write the configuration
+    while((CAN->MSR & CAN_MSR_INAK) != CAN_MSR_INAK){
+        IWDG->KR = IWDG_REFRESH;
         if(--tmout == 0) break;
     }
     CAN->MCR &=~ CAN_MCR_SLEEP;
@@ -129,7 +131,10 @@ void CAN_setup(uint16_t speed){
     CAN->BTR =  2 << 20 | 3 << 16 | (6000/speed - 1); // speed
     CAN->MCR &=~ CAN_MCR_INRQ;
     tmout = 16000000;
-    while((CAN->MSR & CAN_MSR_INAK)==CAN_MSR_INAK) if(--tmout == 0) break;
+    while((CAN->MSR & CAN_MSR_INAK) == CAN_MSR_INAK){ // Wait the init mode leaving
+        IWDG->KR = IWDG_REFRESH;
+        if(--tmout == 0) break;
+    }
     // accept self ID at filter 0, ALL other at filters 1 and 2
     CAN->FMR = CAN_FMR_FINIT;
     CAN->FA1R = CAN_FA1R_FACT0 | CAN_FA1R_FACT1 | CAN_FA1R_FACT2;
@@ -188,6 +193,7 @@ void can_proc(){
         if(CAN->ESR & CAN_ESR_EPVF) SEND("Passive error limit");
         if(CAN->ESR & CAN_ESR_EWGF) SEND("Error counter limit");
         NL();
+        IWDG->KR = IWDG_REFRESH;
         // request abort for all mailboxes
         CAN->TSR |= CAN_TSR_ABRQ0 | CAN_TSR_ABRQ1 | CAN_TSR_ABRQ2;
         // reset CAN bus
@@ -271,7 +277,6 @@ static void can_process_fifo(uint8_t fifo_num){
     // read all
     while(*RFxR & CAN_RF0R_FMP0){ // amount of messages pending
         // CAN_RDTxR: (16-31) - timestamp, (8-15) - filter match index, (0-3) - data length
-        /* TODO: check filter match index if more than one ID can receive */
         CAN_message msg;
         uint8_t *dat = msg.data;
         uint8_t len = box->RDTR & 0x0f;
@@ -307,7 +312,8 @@ static void can_process_fifo(uint8_t fifo_num){
                     dat[0] = lb & 0xff;
             }
         }
-        if(CAN_messagebuf_push(&msg)) return; // error: buffer is full, try later
+        if(msg.ID == CANID) parseCANcommand(&msg);
+        else if(CAN_messagebuf_push(&msg)) return; // error: buffer is full, try later
         *RFxR |= CAN_RF0R_RFOM0; // release fifo for access to next message
     }
     //if(*RFxR & CAN_RF0R_FULL0) *RFxR &= ~CAN_RF0R_FULL0;

F0-nolib/usbcan_relay/canproto.c

@@ -0,0 +1,171 @@
+/*
+ * This file is part of the canrelay project.
+ * Copyright 2021 Edward V. Emelianov <edward.emelianoff@gmail.com>.
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "adc.h"
+#include "buttons.h"
+#include "canproto.h"
+#include "hardware.h"
+#include "proto.h"
+
+/*
+ * Protocol (endian format depends on command!):
+ * answer will be send to `OUTPID` CAN ID, length depends on received command
+ * IN packet (sent to `CANID`) data bytes:
+ *  0 - command (any from CAN_commands), 1..7 - data
+ * To set value command should have CAN_CMD_SETFLAG == 1
+ * OUT packet depending on command:
+ * CAN_CMD_PING (or any incoming packet with zero lenght) - zero length answer
+ * other commands have data[0] equal to in command (without CAN_CMD_SETFLAG)
+ * CAN_CMD_ADC: data[1]..data[6] - 12bits*4channels RAW ADC data (ADC channels 0..3)
+ * CAN_CMD_BTNS: data[1] = button number (0..3), data[2] - state (keyevent), data[4..7] - event time (LITTLE endian!)
+ * CAN_CMD_LED: data[1] = LEDs state (bits 0..3 for LEDs number 0..3)
+ * CAN_CMD_MCU: data[2,3] = int16_t MCUT*10, data[4,5] = uint16_t Vdd*100 (LITTLE endian!)
+ * CAN_CMD_PWM: data[1..3] = pwm value for each channel (0..2)
+ * CAN_CMD_RELAY: data[0] = (bits 0 & 1) - state of relay N]
+ * CAN_CMD_TMS: data[4..7] = Tms (LITTLE endian!)
+ */
+
+// return total message length
+TRUE_INLINE uint8_t ADCget(uint8_t values[8]){
+    uint16_t v[NUMBER_OF_ADC_CHANNELS];
+    for(int i = 0; i < NUMBER_OF_ADC_CHANNELS; ++i) v[i] = getADCval(i);
+    // if NUMBER_OF_ADC_CHANNELS != 4 - need for manual refactoring!
+    values[1] = v[0] >> 4;
+    values[2] = (v[0] << 4) | ((v[1] >> 8) & 0x0f);
+    values[3] = v[1] & 0xff;
+    values[4] = v[2] >> 4;
+    values[5] = (v[2] << 4) | ((v[3] >> 8) & 0x0f);
+    values[6] = v[3] & 0xff;
+    return 7;
+}
+
+TRUE_INLINE void BTNSget(uint8_t values[8]){
+    uint32_t T;
+    for(uint8_t i = 0; i < BTNSNO; ++i){
+        values[1] = i;
+        values[2] = keystate(i, &T);
+        values[3] = 0;
+        *((uint32_t*)&values[4]) = T;
+        int N = 1000;
+        while(CAN_BUSY == can_send(values, 8, OUTPID)) if(--N == 0) break;
+    }
+}
+
+TRUE_INLINE void LEDSset(uint8_t data[8]){
+    for(int i = 0; i < LEDSNO; ++i){
+        if(data[1] & 1<<i) LED_on(i);
+        else LED_off(i);
+    }
+}
+
+TRUE_INLINE uint8_t LEDSget(uint8_t data[8]){
+    uint8_t x = 0;
+    for(int i = 0; i < LEDSNO; ++i)
+        if(LED_chk(i)) x |= 1<<i;
+    data[1] = x;
+    return 2;
+}
+
+TRUE_INLINE uint8_t MCUget(uint8_t data[8]){
+    *((int16_t*)&data[2]) = (int16_t)getMCUtemp();
+    *((uint16_t*)&data[4]) = (int16_t)getVdd();
+    return 6;
+}
+
+TRUE_INLINE void PWMset(uint8_t data[8]){
+    volatile uint32_t *reg = &TIM1->CCR1;
+    for(int i = 0; i < 3; ++i)
+        reg[i] = data[i+1];
+}
+
+TRUE_INLINE uint8_t PWMget(uint8_t data[8]){
+    volatile uint32_t *reg = &TIM1->CCR1;
+    for(int i = 0; i < 3; ++i)
+        data[i+1] = reg[i];
+    return 4;
+}
+
+TRUE_INLINE void Rset(uint8_t data[8]){
+    for(int i = 0; i < RelaysNO; ++i){
+        if(data[1] & 1<<i) Relay_ON(i);
+        else Relay_OFF(i);
+    }
+}
+
+TRUE_INLINE uint8_t Rget(uint8_t data[8]){
+    uint8_t x = 0;
+    for(int i = 0; i < RelaysNO; ++i){
+        if(Relay_chk(i)) x |= 1<<i;
+    }
+    data[1] = x;
+    return 2;
+}
+
+TRUE_INLINE uint8_t showTms(uint8_t data[8]){
+    *((uint32_t*)&data[4]) = Tms;
+    return 8;
+}
+
+void parseCANcommand(CAN_message *msg){
+    uint8_t outpdata[8], len = 0;
+#ifdef EBUG
+    SEND("Get data: ");
+    for(int i = 0; i < msg->length; ++i){
+        printuhex(msg->data[i]); bufputchar(' ');
+    }
+    NL();
+#endif
+    int N = 1000;
+    uint8_t cmd = msg->data[0] & CANCMDMASK, setter = msg->data[0] & CAN_CMD_SETFLAG;
+    if(msg->length == 0 || cmd == CAN_CMD_PING){ // no commands or ping cmd -> return empty message (ping)
+        goto sendans;
+    }
+    outpdata[0] = cmd;
+    switch(cmd){
+        case CAN_CMD_ADC:
+            len = ADCget(outpdata);
+        break;
+        case CAN_CMD_BTNS:
+            BTNSget(outpdata);
+            return;
+        break;
+        case CAN_CMD_LED:
+            if(setter) LEDSset(msg->data);
+            len = LEDSget(outpdata);
+        break;
+        case CAN_CMD_MCU:
+            len = MCUget(outpdata);
+        break;
+        case CAN_CMD_PWM:
+            if(setter) PWMset(msg->data);
+            len = PWMget(outpdata);
+        break;
+        case CAN_CMD_RELAY:
+            if(setter) Rset(msg->data);
+            len = Rget(outpdata);
+        break;
+        case CAN_CMD_TMS:
+            len = showTms(outpdata);
+        break;
+        default: // wrong command ->
+            outpdata[0] = CAN_CMD_ERRCMD;
+            len = 1;
+    }
+sendans:
+    while(CAN_BUSY == can_send(outpdata, len, OUTPID)) if(--N == 0) break;
+}

F0-nolib/usbcan_relay/canproto.h

@@ -0,0 +1,47 @@
+/*
+ * This file is part of the canrelay project.
+ * Copyright 2021 Edward V. Emelianov <edward.emelianoff@gmail.com>.
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#pragma once
+#ifndef CANPROTO_H__
+#define CANPROTO_H__
+
+#include "stm32f0.h"
+#include "can.h"
+
+// command without setter flag
+#define CANCMDMASK  (0x7f)
+
+typedef enum{
+    CAN_CMD_PING,   // ping (without setter)
+    CAN_CMD_RELAY,  // relay get/set
+    CAN_CMD_PWM,    // PWM get/set
+    CAN_CMD_ADC,    // get ADC (without setter)
+    CAN_CMD_MCU,    // MCU T and Vdd
+    CAN_CMD_LED,    // LEDs get/set
+    CAN_CMD_BTNS,   // get Buttons state (without setter)
+    CAN_CMD_TMS,    // get time from start (in ms)
+    CAN_CMD_ERRCMD, // wrong command
+    CAN_CMD_SETFLAG = 0x80 // command is setter
+} CAN_commands;
+
+// output messages identifier
+#define OUTPID  (CANID + 0x100)
+
+void parseCANcommand(CAN_message *msg);
+
+#endif // CANPROTO_H__

F0-nolib/usbcan_relay/hardware.c

@@ -27,6 +27,10 @@ const uint32_t LEDpins[LEDSNO] = {1<<12, 1<<13, 1<<14, 1<<15};
 // Buttons: PA2..PA5, pullup
 GPIO_TypeDef *BTNports[BTNSNO] = {GPIOA, GPIOA, GPIOA, GPIOA};
 const uint32_t BTNpins[BTNSNO] = {1<<2, 1<<3, 1<<4, 1<<5};
+// relays: PA0/1
+GPIO_TypeDef *R_ports[RelaysNO] = {GPIOA, GPIOA};
+const uint32_t R_pins[RelaysNO] = {1<<0, 1<<1};
+
 
 void gpio_setup(void){
     RCC->AHBENR |= RCC_AHBENR_GPIOAEN | RCC_AHBENR_GPIOBEN;
@@ -37,8 +41,8 @@ void gpio_setup(void){
     GPIOB->PUPDR = GPIO_PUPDR0_PU | GPIO_PUPDR1_PU | GPIO_PUPDR2_PU | GPIO_PUPDR3_PU | GPIO_PUPDR4_PU |
                    GPIO_PUPDR5_PU | GPIO_PUPDR6_PU | GPIO_PUPDR7_PU;
     // relays (PA0..1) as outputs, buttons (PA2..5) as pullup inputs
-    // PA8..10 - PWM @ TIM1
-    GPIOA->MODER = GPIO_MODER_MODER0_O | GPIO_MODER_MODER1_O |
+    // PA6,7 - ADC IN, PA8..10 - PWM @ TIM1
+    GPIOA->MODER = GPIO_MODER_MODER0_O | GPIO_MODER_MODER1_O | GPIO_MODER_MODER6_AI | GPIO_MODER_MODER7_AI |
                    GPIO_MODER_MODER8_AF | GPIO_MODER_MODER9_AF | GPIO_MODER_MODER10_AF;
     GPIOA->PUPDR = GPIO_PUPDR2_PU | GPIO_PUPDR3_PU | GPIO_PUPDR4_PU | GPIO_PUPDR5_PU;
     CANID = (~READ_INV_CAN_ADDR()) & CAN_INV_ID_MASK;
@@ -90,6 +94,8 @@ void pause_ms(uint32_t pause){
     while(Tms < Tnxt) nop();
 }
 
+
+#ifdef EBUG
 void Jump2Boot(){
     __disable_irq();
     IWDG->KR = IWDG_REFRESH;
@@ -123,6 +129,20 @@ void Jump2Boot(){
     // set main stack pointer
     __set_MSP(*((uint32_t *)addr));
     IWDG->KR = IWDG_REFRESH;
-    // jump to bootloader
+    // due to "empty check" mechanism, STM32F042 can jump to bootloader only with empty first 4 bytes of user code
+    while ((FLASH->SR & FLASH_SR_BSY) != 0){}
+    FLASH->SR = FLASH_SR_EOP | FLASH_SR_PGERR | FLASH_SR_WRPRTERR;
+    if ((FLASH->CR & FLASH_CR_LOCK) != 0){
+        FLASH->KEYR = FLASH_KEY1;
+        FLASH->KEYR = FLASH_KEY2;
+    }
+    FLASH->CR |= FLASH_CR_PER;
+    FLASH->AR = 0x08000000; // erase zero's page
+    FLASH->CR |= FLASH_CR_STRT;
+    while(!(FLASH->SR & FLASH_SR_EOP));
+    FLASH->SR |= FLASH_SR_EOP;
+    FLASH->CR &= ~FLASH_CR_PER;
+    // jump to bootloader (don't work :( )
     SysMemBootJump();
 }
+#endif

F0-nolib/usbcan_relay/hardware.h

@@ -48,6 +48,14 @@ extern const uint32_t LEDpins[LEDSNO];
 #define LED_toggle(x)   do{pin_toggle(LEDports[x], LEDpins[x]);}while(0)
 #define LED_on(x)       do{pin_clear(LEDports[x], LEDpins[x]);}while(0)
 #define LED_off(x)      do{pin_set(LEDports[x], LEDpins[x]);}while(0)
+#define LED_chk(x)      ((LEDports[x]->IDR & LEDpins[x]) ? 0 : 1)
+
+#define RelaysNO    (2)
+extern GPIO_TypeDef *R_ports[RelaysNO];
+extern const uint32_t R_pins[RelaysNO];
+#define Relay_ON(x)     do{pin_set(R_ports[x], R_pins[x]);}while(0)
+#define Relay_OFF(x)    do{pin_clear(R_ports[x], R_pins[x]);}while(0)
+#define Relay_chk(x)    (pin_read(R_ports[x], R_pins[x]))
 
 // Buttons amount
 #define BTNSNO      (4)
@@ -66,10 +74,12 @@ extern uint16_t CANID; // self CAN ID (read @ init)
 
 extern volatile uint32_t Tms;
 
-void gpio_setup(void);
+void gpio_setup();
 void iwdg_setup();
 void tim1_setup();
 void pause_ms(uint32_t pause);
+#ifdef EBUG
 void Jump2Boot();
+#endif
 
 #endif // __HARDWARE_H__

F0-nolib/usbcan_relay/main.c

@@ -16,6 +16,7 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
+#include "adc.h"
 #include "buttons.h"
 #include "can.h"
 #include "hardware.h"
@@ -70,6 +71,7 @@ int main(void){
     sysreset();
     SysTick_Config(6000, 1);
     gpio_setup();
+    adc_setup();
     tim1_setup();
     USB_setup();
     CAN_setup(100);

F0-nolib/usbcan_relay/proto.c

@@ -16,6 +16,7 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
+#include "adc.h"
 #include "buttons.h"
 #include "can.h"
 #include "hardware.h"
@@ -179,7 +180,7 @@ static CAN_message *parseCANmsg(char *txt){
 TRUE_INLINE void sendCANcommand(char *txt){
     CAN_message *msg = parseCANmsg(txt);
     if(!msg) return;
-    uint32_t N = 1000000;
+    uint32_t N = 1000;
     while(CAN_BUSY == can_send(msg->data, msg->length, msg->ID)){
         if(--N == 0) break;
     }
@@ -428,7 +429,7 @@ TRUE_INLINE void getPWM(){
     volatile uint32_t *reg = &TIM1->CCR1;
     for(int n = 0; n < 3; ++n){
         SEND("PWM");
-        bufputchar(n);
+        bufputchar('0' + n);
         bufputchar('=');
         printu(*reg++);
         bufputchar('\n');
@@ -455,6 +456,35 @@ TRUE_INLINE void changePWM(char *str){
     SEND("OK, changed");
 }
 
+TRUE_INLINE void printADC(){ // show all 4 channels ADC
+    for(int i = 0; i < NUMBER_OF_ADC_CHANNELS; ++i){
+        SEND("ADC"); bufputchar('0' + i); bufputchar('=');
+        printu(getADCval(i)); bufputchar('\n');
+    }
+    sendbuf();
+}
+
+TRUE_INLINE void printVT(){ // show T and Vdd
+    int32_t t = getMCUtemp();
+    SEND("T=");
+    if(t < 0){ bufputchar('-'); t = -t; }
+    printu(t); SEND("/10degC\nVDD=");
+    printu(getVdd()); SEND("/100V");
+}
+
+// set or check relay(N) state
+TRUE_INLINE void relayX(uint8_t N, const char *txt){
+    if(N >= RelaysNO) return;
+    txt = omit_spaces(txt);
+    uint32_t sr;
+    char *b = getnum(txt, &sr);
+    if(b && b != txt && sr < 2){
+        if(sr) Relay_ON(N); else Relay_OFF(N);
+    }
+    SEND("Relay"); bufputchar('0'+N); bufputchar('=');
+    bufputchar('0' + Relay_chk(N));
+}
+
 /**
  * @brief cmd_parser - command parsing
  * @param txt   - buffer with commands & data
@@ -466,6 +496,14 @@ void cmd_parser(char *txt){
      * parse long commands here
      */
     switch(_1st){
+        case '0':
+            relayX(0, txt + 1);
+            goto eof;
+        break;
+        case '1':
+            relayX(1, txt + 1);
+            goto eof;
+        break;
         case 'a':
             addIGN(txt + 1);
             goto eof;
@@ -502,23 +540,32 @@ void cmd_parser(char *txt){
     }
     if(txt[1] != '\n') *txt = '?'; // help for wrong message length
     switch(_1st){
+        case 'A':
+            printADC();
+            return;
+        break;
         case 'b':
             getBtnState();
         break;
         case 'd':
             IgnSz = 0;
         break;
+#ifdef EBUG
         case 'D':
             SEND("Go into DFU mode\n");
             sendbuf();
             Jump2Boot();
         break;
+#endif
         case 'I':
             SEND("CAN ID: "); printuhex(CANID);
         break;
         case 'l':
             list_filters();
         break;
+        case 'm':
+            printVT();
+        break;
         case 'p':
             print_ign_buf();
         break;
@@ -543,15 +590,21 @@ void cmd_parser(char *txt){
         break;
         default: // help
             SEND(
+            "'0' - turn relay0 on(1) or off(0)\n"
+            "'1' - turn relay1 on(1) or off(0)\n"
             "'a' - add ID to ignore list (max 10 IDs)\n"
+            "'A' - get ADC values @ all 4 channels\n"
             "'b' - get buttons' state\n"
             "'C' - reinit CAN with given baudrate\n"
             "'d' - delete ignore list\n"
+            #ifdef EBUG
             "'D' - activate DFU mode\n"
+            #endif
             "'f' - add/delete filter, format: bank# FIFO# mode(M/I) num0 [num1 [num2 [num3]]]\n"
             "'F' - send/clear flood message: F ID byte0 ... byteN\n"
             "'I' - read CAN ID\n"
             "'l' - list all active filters\n"
+            "'m' - get MCU temp & Vdd\n"
             "'o' - turn nth LED OFF\n"
             "'O' - turn nth LED ON\n"
             "'p' - print ignore buffer\n"