hide deprecated code; make USB snippet common for F0/F1/F3

F0:F030,F042,F072/deprecated/CANbus_stepper/kicad/Readme.md

@@ -0,0 +1,3 @@
+# CAN bus stepper controller
+
+Move one stepper (12..36V) by CAN or USB bus.

F0:F030,F042,F072/deprecated/CANbus_stepper/kicad/acs712.lib

@@ -0,0 +1,22 @@
+EESchema-LIBRARY Version 2.3  Date: Sun 04 May 2014 09:27:50 PM MSK
+#encoding utf-8
+#
+# ACS712
+#
+DEF ACS712 U 0 40 Y Y 1 F N
+F0 "U" 0 300 60 H V C CNN
+F1 "ACS712" 0 -350 60 H V C CNN
+DRAW
+S -450 250 450 -300 0 1 0 N
+X IP+ 1 -550 150 300 R 50 50 1 1 I
+X IP+ 2 -550 50 300 R 50 50 1 1 I
+X IP- 3 -550 -100 300 R 50 50 1 1 I
+X IP- 4 -550 -200 300 R 50 50 1 1 I
+X GND 5 550 -200 300 L 50 50 1 1 I
+X FILTER 6 550 -100 300 L 50 50 1 1 I
+X VIOUT 7 550 50 300 L 50 50 1 1 I
+X Vcc 8 550 150 300 L 50 50 1 1 I
+ENDDRAW
+ENDDEF
+#
+#End Library

F0:F030,F042,F072/deprecated/CANbus_stepper/kicad/elements.lib

@@ -0,0 +1,190 @@
+EESchema-LIBRARY Version 2.3
+#encoding utf-8
+#
+# 74HC4051
+#
+DEF 74HC4051 U 0 10 Y Y 1 F N
+F0 "U" 0 0 50 H V C CNN
+F1 "74HC4051" 0 -150 50 H V C CNN
+F2 "" 0 0 50 H V C CNN
+F3 "" 0 0 50 H V C CNN
+$FPLIST
+ SO16
+ TSSOP16
+ SSOP16
+ DHVQFN16
+$ENDFPLIST
+DRAW
+S -400 450 400 -450 0 1 0 N
+X Y4 1 700 -50 300 L 50 50 1 1 B
+X Y6 2 700 -250 300 L 50 50 1 1 B
+X Z 3 0 -750 300 U 50 50 1 1 B
+X Y7 4 700 -350 300 L 50 50 1 1 B
+X Y5 5 700 -150 300 L 50 50 1 1 B
+X ~E 6 -700 -350 300 R 50 50 1 1 I I
+X VEE 7 -700 0 300 R 50 50 1 1 W
+X GND 8 -700 -200 300 R 50 50 1 1 W
+X S2 9 -700 150 300 R 50 50 1 1 I
+X S1 10 -700 250 300 R 50 50 1 1 I
+X S0 11 -700 350 300 R 50 50 1 1 I
+X Y3 12 700 50 300 L 50 50 1 1 B
+X Y0 13 700 350 300 L 50 50 1 1 B
+X Y1 14 700 250 300 L 50 50 1 1 B
+X Y2 15 700 150 300 L 50 50 1 1 B
+X VCC 16 -700 -100 300 R 50 50 1 1 W
+ENDDRAW
+ENDDEF
+#
+# D_Schottky_x2_ACom_AKK
+#
+DEF D_Schottky_x2_ACom_AKK D 0 30 Y N 1 F N
+F0 "D" 50 -100 50 H V C CNN
+F1 "D_Schottky_x2_ACom_AKK" 0 100 50 H V C CNN
+F2 "" 0 0 50 H V C CNN
+F3 "" 0 0 50 H V C CNN
+DRAW
+P 2 0 1 0 -140 0 150 0 N
+P 2 0 1 0 0 0 0 -100 N
+P 3 0 1 8 -150 50 -150 -50 -150 -50 N
+P 3 0 1 8 150 50 150 -50 150 -50 N
+P 4 0 1 8 -150 50 -170 50 -170 40 -170 40 N
+P 4 0 1 8 150 -50 170 -50 170 -40 170 -40 N
+P 4 0 1 8 150 50 130 50 130 40 130 40 N
+P 5 0 1 8 -130 -40 -130 -50 -150 -50 -150 -50 -150 -50 N
+P 6 0 1 8 -50 -50 -150 0 -50 50 -50 -50 -50 -50 -50 -50 N
+P 6 0 1 8 50 50 150 0 50 -50 50 50 50 50 50 50 N
+X A 1 0 -200 100 U 50 50 0 1 P
+X K 2 -300 0 150 R 50 50 0 1 P
+X K 3 300 0 150 L 50 50 0 1 P
+ENDDRAW
+ENDDEF
+#
+# LM1117-ADJ
+#
+DEF LM1117-ADJ U 0 30 Y Y 1 F N
+F0 "U" 100 -250 50 H V C CNN
+F1 "LM1117-ADJ" 0 250 50 H V C CNN
+F2 "" 0 0 50 H V C CNN
+F3 "" 0 0 50 H V C CNN
+ALIAS LM1117-1.8 LM1117-2.5 LM1117-3.3 LM1117-5.0
+$FPLIST
+ SOT-223*
+ TO-263*
+ TO-252*
+$ENDFPLIST
+DRAW
+S -200 -200 200 200 0 1 10 f
+X GND/ADJ 1 0 -300 100 U 50 50 1 1 W
+X VO 2 300 0 100 L 50 50 1 1 w
+X VI 3 -300 0 100 R 50 50 1 1 W
+ENDDRAW
+ENDDEF
+#
+# PESD1CAN
+#
+DEF PESD1CAN D 0 30 Y N 1 F N
+F0 "D" 0 -350 50 H V C CNN
+F1 "PESD1CAN" 50 150 50 H V C CNN
+F2 "" 0 0 50 H V C CNN
+F3 "" 0 0 50 H V C CNN
+$FPLIST
+ SOT23
+$ENDFPLIST
+DRAW
+S -200 100 300 -300 0 1 0 N
+P 2 0 1 0 -140 -200 150 -200 N
+P 2 0 1 0 -140 0 150 0 N
+P 3 0 1 8 -150 -150 -150 -250 -150 -250 N
+P 3 0 1 8 -150 50 -150 -50 -150 -50 N
+P 3 0 1 8 150 -150 150 -250 150 -250 N
+P 3 0 1 8 150 50 150 -50 150 -50 N
+P 4 0 1 8 -150 -150 -170 -150 -170 -160 -170 -160 N
+P 4 0 1 8 -150 50 -170 50 -170 40 -170 40 N
+P 4 0 1 8 150 -250 170 -250 170 -240 170 -240 N
+P 4 0 1 8 150 -150 130 -150 130 -160 130 -160 N
+P 4 0 1 8 150 -50 170 -50 170 -40 170 -40 N
+P 4 0 1 0 150 0 250 0 250 -200 150 -200 N
+P 4 0 1 8 150 50 130 50 130 40 130 40 N
+P 5 0 1 8 -130 -240 -130 -250 -150 -250 -150 -250 -150 -250 N
+P 5 0 1 8 -130 -40 -130 -50 -150 -50 -150 -50 -150 -50 N
+P 6 0 1 8 -50 -250 -150 -200 -50 -150 -50 -250 -50 -250 -50 -250 N
+P 6 0 1 8 -50 -50 -150 0 -50 50 -50 -50 -50 -50 -50 -50 N
+P 6 0 1 8 50 -150 150 -200 50 -250 50 -150 50 -150 50 -150 N
+P 6 0 1 8 50 50 150 0 50 -50 50 50 50 50 50 50 N
+X K 1 -300 0 150 R 50 50 0 1 P
+X K 2 -300 -200 150 R 50 50 0 1 P
+X O 3 400 -100 150 L 50 50 0 1 P
+ENDDRAW
+ENDDEF
+#
+# TPS2051
+#
+DEF TPS2051 U 0 40 Y Y 1 F N
+F0 "U" 0 -300 60 H V C CNN
+F1 "TPS2051" 0 300 60 H V C CNN
+F2 "" 0 0 60 H I C CNN
+F3 "" 0 0 60 H I C CNN
+DRAW
+S -250 250 250 -250 0 1 0 N
+X GND 1 -450 150 200 R 50 50 1 1 W
+X IN 2 -450 50 200 R 50 50 1 1 W
+X IN 3 -450 -50 200 R 50 50 1 1 P
+X EN 4 -450 -150 200 R 50 50 1 1 I
+X ~OC 5 450 -150 200 L 50 50 1 1 O
+X OUT 6 450 -50 200 L 50 50 1 1 P
+X OUT 7 450 50 200 L 50 50 1 1 P
+X OUT 8 450 150 200 L 50 50 1 1 w
+ENDDRAW
+ENDDEF
+#
+# USB6B1
+#
+DEF USB6B1 D 0 30 Y N 1 F N
+F0 "D" 0 -450 50 H V C CNN
+F1 "USB6B1" 0 400 50 H V C CNN
+F2 "" 200 -100 50 V V C CNN
+F3 "" 200 -100 50 V V C CNN
+$FPLIST
+ SO8
+$ENDFPLIST
+DRAW
+C -150 -300 7 0 1 0 N
+C -150 100 7 0 1 0 N
+C -150 300 7 0 1 0 N
+C 0 -300 7 0 1 0 N
+C 0 -100 7 0 1 0 N
+C 0 300 7 0 1 0 N
+C 200 -300 7 0 1 0 N
+C 200 300 7 0 1 0 N
+S -300 -100 300 -100 0 1 0 N
+S -300 300 300 300 0 1 0 N
+S -200 -150 -100 -150 0 1 0 N
+S -200 250 -100 250 0 1 0 N
+S -150 300 -150 -300 0 1 0 N
+S -50 -150 50 -150 0 1 0 N
+S -50 250 50 250 0 1 0 N
+S 0 300 0 -300 0 1 0 N
+S 200 300 200 -300 0 1 0 N
+S 300 -300 -300 -300 0 1 0 N
+S 300 100 -300 100 0 1 0 N
+P 3 0 1 8 150 50 250 50 250 50 N
+P 4 0 1 8 150 50 150 30 160 30 160 30 N
+P 4 0 1 8 250 50 250 70 240 70 240 70 N
+P 5 0 1 0 -250 350 300 350 300 -350 -250 -350 -250 350 N
+P 6 0 1 8 -200 -250 -150 -150 -100 -250 -200 -250 -200 -250 -200 -250 N
+P 6 0 1 8 -200 150 -150 250 -100 150 -200 150 -200 150 -200 150 N
+P 6 0 1 8 -50 -250 0 -150 50 -250 -50 -250 -50 -250 -50 -250 N
+P 6 0 1 8 -50 150 0 250 50 150 -50 150 -50 150 -50 150 N
+P 6 0 1 8 150 -50 200 50 250 -50 150 -50 150 -50 150 -50 N
+X VCC 1 -500 300 200 R 50 50 1 1 P
+X I/O1 2 -500 100 200 R 50 50 1 1 P
+X I/O2 3 -500 -100 200 R 50 50 1 1 P
+X GND 4 -500 -300 200 R 50 50 1 1 P
+X GND 5 500 -300 200 L 50 50 1 1 P
+X I/O2 6 500 -100 200 L 50 50 1 1 P
+X I/O1 7 500 100 200 L 50 50 1 1 P
+X VCC 8 500 300 200 L 50 50 1 1 P
+ENDDRAW
+ENDDEF
+#
+#End Library

F0:F030,F042,F072/deprecated/CANbus_stepper/kicad/fp-lib-table

@@ -0,0 +1,6 @@
+(fp_lib_table
+  (lib (name TestPoint)(type KiCad)(uri ${KISYSMOD}/TestPoint.pretty)(options "")(descr ""))
+  (lib (name Fuse)(type KiCad)(uri ${KISYSMOD}/Fuse.pretty)(options "")(descr ""))
+  (lib (name MyFootprints)(type KiCad)(uri /home/eddy/Docs/SAO/ELECTRONICS/STM32/F0-srcs/CANbus_stepper/my_footprints.pretty)(options "")(descr ""))
+  (lib (name Connector_Dsub)(type KiCad)(uri /usr/share/kicad/kicad-footprints/Connector_Dsub.pretty)(options "")(descr ""))
+)

F0:F030,F042,F072/deprecated/CANbus_stepper/kicad/gerbers/stm32-Edge_Cuts.gbr

@@ -0,0 +1,31 @@
+G04 #@! TF.GenerationSoftware,KiCad,Pcbnew,5.1.4*
+G04 #@! TF.CreationDate,2020-02-05T09:24:40+03:00*
+G04 #@! TF.ProjectId,stm32,73746d33-322e-46b6-9963-61645f706362,rev?*
+G04 #@! TF.SameCoordinates,Original*
+G04 #@! TF.FileFunction,Profile,NP*
+%FSLAX46Y46*%
+G04 Gerber Fmt 4.6, Leading zero omitted, Abs format (unit mm)*
+G04 Created by KiCad (PCBNEW 5.1.4) date 2020-02-05 09:24:40*
+%MOMM*%
+%LPD*%
+G04 APERTURE LIST*
+%ADD10C,0.150000*%
+G04 APERTURE END LIST*
+D10*
+X80500000Y-117500000D02*
+X174000000Y-117500000D01*
+X174000000Y-62500000D02*
+X80500000Y-62500000D01*
+X82166666Y-62500000D02*
+G75*
+G03X82166666Y-62500000I-1666666J0D01*
+G01*
+X78000000Y-62500000D02*
+X83000000Y-62500000D01*
+X80500000Y-60000000D02*
+X80500000Y-65000000D01*
+X80500000Y-117500000D02*
+X80500000Y-62500000D01*
+X174000000Y-62500000D02*
+X174000000Y-117500000D01*
+M02*

F0:F030,F042,F072/deprecated/CANbus_stepper/kicad/my_footprints.pretty/FuseHolder.kicad_mod

@@ -0,0 +1,16 @@
+(module FuseHolder (layer F.Cu) (tedit 5E318B39)
+  (fp_text reference REF** (at 0 4.4) (layer F.SilkS)
+    (effects (font (size 1 1) (thickness 0.15)))
+  )
+  (fp_text value FuseHolder (at -0.1 -0.1) (layer F.Fab)
+    (effects (font (size 1 1) (thickness 0.15)))
+  )
+  (fp_line (start -9.9 3.4) (end -9.9 -3.4) (layer F.SilkS) (width 0.15))
+  (fp_line (start 9.9 3.4) (end -9.9 3.4) (layer F.SilkS) (width 0.15))
+  (fp_line (start 9.9 -3.4) (end 9.9 3.4) (layer F.SilkS) (width 0.15))
+  (fp_line (start -9.9 -3.4) (end 9.9 -3.4) (layer F.SilkS) (width 0.15))
+  (pad 1 thru_hole oval (at 6.95 -1.75) (size 4 2.5) (drill oval 1.7 0.6) (layers *.Cu *.Mask))
+  (pad 1 thru_hole oval (at 6.95 1.75) (size 4 2.5) (drill oval 1.7 0.6) (layers *.Cu *.Mask))
+  (pad 2 thru_hole oval (at -6.95 1.75) (size 4 2.5) (drill oval 1.7 0.6) (layers *.Cu *.Mask))
+  (pad 2 thru_hole oval (at -6.95 -1.75) (size 4 2.5) (drill oval 1.7 0.6) (layers *.Cu *.Mask))
+)

F0:F030,F042,F072/deprecated/CANbus_stepper/kicad/my_footprints.pretty/Hole_3mm.kicad_mod

@@ -0,0 +1,9 @@
+(module Hole_3mm (layer F.Cu) (tedit 5913F6E4)
+  (fp_text reference REF** (at 0 3.81) (layer F.SilkS) hide
+    (effects (font (size 1 1) (thickness 0.15)))
+  )
+  (fp_text value Hole_3mm (at 0 -7.62) (layer F.Fab) hide
+    (effects (font (size 1 1) (thickness 0.15)))
+  )
+  (pad 1 thru_hole circle (at 0 0) (size 5 5) (drill 3) (layers *.Cu *.Mask))
+)

F0:F030,F042,F072/deprecated/CANbus_stepper/kicad/my_footprints.pretty/RJ9-4P4C.kicad_mod

@@ -0,0 +1,31 @@
+(module RJ9-4P4C (layer F.Cu) (tedit 555F7A30)
+  (fp_text reference J** (at 0 -10.1346) (layer F.SilkS)
+    (effects (font (size 1 1) (thickness 0.15)))
+  )
+  (fp_text value RJ9-4P4C (at 0 10.2108) (layer F.Fab) hide
+    (effects (font (size 1 1) (thickness 0.15)))
+  )
+  (fp_circle (center 0 0) (end -0.25 0) (layer F.CrtYd) (width 0.05))
+  (fp_line (start -5.84 -9.25) (end 5.84 -9.25) (layer F.CrtYd) (width 0.05))
+  (fp_line (start 5.84 -9.25) (end 5.84 9.25) (layer F.CrtYd) (width 0.05))
+  (fp_line (start 5.84 9.25) (end -5.84 9.25) (layer F.CrtYd) (width 0.05))
+  (fp_line (start -5.84 9.25) (end -5.84 -9.25) (layer F.CrtYd) (width 0.05))
+  (fp_line (start 0 -0.35) (end 0 0.35) (layer F.CrtYd) (width 0.05))
+  (fp_line (start -0.35 0) (end 0.35 0) (layer F.CrtYd) (width 0.05))
+  (fp_line (start -5.59 9) (end -5.59 -9) (layer F.Fab) (width 0.12))
+  (fp_line (start -5.59 -9) (end 5.59 -9) (layer F.Fab) (width 0.12))
+  (fp_line (start 5.59 -9) (end 5.59 9) (layer F.Fab) (width 0.12))
+  (fp_line (start 5.59 9) (end -5.59 9) (layer F.Fab) (width 0.12))
+  (fp_line (start -5.59 8.8) (end -5.59 -9) (layer F.SilkS) (width 0.12))
+  (fp_line (start -5.59 -9) (end 5.59 -9) (layer F.SilkS) (width 0.12))
+  (fp_line (start 5.59 -9) (end 5.59 8.8) (layer F.SilkS) (width 0.12))
+  (fp_circle (center 3.81 1.15) (end 5.75 1.15) (layer B.CrtYd) (width 0.05))
+  (fp_circle (center -3.81 1.15) (end -5.75 1.15) (layer B.CrtYd) (width 0.05))
+  (fp_circle (center -1.905 -6.12) (end -1.805 -6.12) (layer F.SilkS) (width 0.2))
+  (pad 1 thru_hole circle (at -1.905 -5.2) (size 1.2 1.2) (drill 0.8) (layers *.Cu *.Mask))
+  (pad 2 thru_hole circle (at -0.635 -7.74) (size 1.2 1.2) (drill 0.8) (layers *.Cu *.Mask))
+  (pad 3 thru_hole circle (at 0.635 -5.2) (size 1.2 1.2) (drill 0.8) (layers *.Cu *.Mask))
+  (pad 4 thru_hole circle (at 1.905 -7.74) (size 1.2 1.2) (drill 0.8) (layers *.Cu *.Mask))
+  (pad "" np_thru_hole circle (at -3.81 1.15) (size 3.2 3.2) (drill 3.2) (layers *.Cu *.Mask))
+  (pad "" np_thru_hole circle (at 3.81 1.15) (size 3.2 3.2) (drill 3.2) (layers *.Cu *.Mask))
+)

F0:F030,F042,F072/deprecated/CANbus_stepper/kicad/my_footprints.pretty/SMD_conn_4x2.5mm.kicad_mod

@@ -0,0 +1,12 @@
+(module SMD_conn_4x2.5mm (layer F.Cu) (tedit 58B86145)
+  (fp_text reference REF** (at 0 3.81) (layer F.SilkS)
+    (effects (font (size 1 1) (thickness 0.15)))
+  )
+  (fp_text value SMD_conn_4x2.5mm (at 0 -3.81) (layer F.Fab)
+    (effects (font (size 1 1) (thickness 0.15)))
+  )
+  (pad 1 smd rect (at -3.81 0) (size 1.5 5) (layers F.Cu F.Paste F.Mask))
+  (pad 2 smd rect (at -1.27 0) (size 1.5 5) (layers F.Cu F.Paste F.Mask))
+  (pad 3 smd rect (at 1.27 0) (size 1.5 5) (layers F.Cu F.Paste F.Mask))
+  (pad 4 smd rect (at 3.81 0) (size 1.5 5) (layers F.Cu F.Paste F.Mask))
+)

F0:F030,F042,F072/deprecated/CANbus_stepper/kicad/my_footprints.pretty/TH_via.kicad_mod

@@ -0,0 +1,10 @@
+(module TH_via (layer F.Cu) (tedit 5A5E619A)
+  (fp_text reference REF** (at 0 0.5) (layer F.SilkS) hide
+    (effects (font (size 1 1) (thickness 0.15)))
+  )
+  (fp_text value TH_via (at 0 -0.5) (layer F.Fab) hide
+    (effects (font (size 1 1) (thickness 0.15)))
+  )
+  (pad 1 thru_hole circle (at 0 0) (size 1.5 1.5) (drill 0.8) (layers *.Cu *.Mask)
+    (zone_connect 1))
+)

F0:F030,F042,F072/deprecated/CANbus_stepper/kicad/stm32-rescue.lib

@@ -0,0 +1,593 @@
+EESchema-LIBRARY Version 2.4
+#encoding utf-8
+#
+# +3.3V-power
+#
+DEF +3.3V-power #PWR 0 0 Y Y 1 F P
+F0 "#PWR" 0 -150 50 H I C CNN
+F1 "+3.3V-power" 0 140 50 H V C CNN
+F2 "" 0 0 50 H I C CNN
+F3 "" 0 0 50 H I C CNN
+DRAW
+P 2 0 1 0 -30 50 0 100 N
+P 2 0 1 0 0 0 0 100 N
+P 2 0 1 0 0 100 30 50 N
+X +3V3 1 0 0 0 U 50 50 1 1 W N
+ENDDRAW
+ENDDEF
+#
+# +5V-power
+#
+DEF +5V-power #PWR 0 0 Y Y 1 F P
+F0 "#PWR" 0 -150 50 H I C CNN
+F1 "+5V-power" 0 140 50 H V C CNN
+F2 "" 0 0 50 H I C CNN
+F3 "" 0 0 50 H I C CNN
+DRAW
+P 2 0 1 0 -30 50 0 100 N
+P 2 0 1 0 0 0 0 100 N
+P 2 0 1 0 0 100 30 50 N
+X +5V 1 0 0 0 U 50 50 1 1 W N
+ENDDRAW
+ENDDEF
+#
+# CP-Device
+#
+DEF CP-Device C 0 10 N Y 1 F N
+F0 "C" 25 100 50 H V L CNN
+F1 "CP-Device" 25 -100 50 H V L CNN
+F2 "" 38 -150 50 H I C CNN
+F3 "" 0 0 50 H I C CNN
+$FPLIST
+ CP_*
+$ENDFPLIST
+DRAW
+S -90 20 90 40 0 1 0 N
+P 2 0 1 0 -70 90 -30 90 N
+P 2 0 1 0 -50 110 -50 70 N
+S 90 -20 -90 -40 0 1 0 F
+X ~ 1 0 150 110 D 50 50 1 1 P
+X ~ 2 0 -150 110 U 50 50 1 1 P
+ENDDRAW
+ENDDEF
+#
+# Conn_01x01-Connector_Generic
+#
+DEF Conn_01x01-Connector_Generic J 0 40 Y N 1 F N
+F0 "J" 0 100 50 H V C CNN
+F1 "Conn_01x01-Connector_Generic" 0 -100 50 H V C CNN
+F2 "" 0 0 50 H I C CNN
+F3 "" 0 0 50 H I C CNN
+$FPLIST
+ Connector*:*
+$ENDFPLIST
+DRAW
+S -50 5 0 -5 1 1 6 N
+S -50 50 50 -50 1 1 10 f
+X Pin_1 1 -200 0 150 R 50 50 1 1 P
+ENDDRAW
+ENDDEF
+#
+# Conn_01x06-Connector_Generic
+#
+DEF Conn_01x06-Connector_Generic J 0 40 Y N 1 F N
+F0 "J" 0 300 50 H V C CNN
+F1 "Conn_01x06-Connector_Generic" 0 -400 50 H V C CNN
+F2 "" 0 0 50 H I C CNN
+F3 "" 0 0 50 H I C CNN
+$FPLIST
+ Connector*:*_1x??_*
+$ENDFPLIST
+DRAW
+S -50 -295 0 -305 1 1 6 N
+S -50 -195 0 -205 1 1 6 N
+S -50 -95 0 -105 1 1 6 N
+S -50 5 0 -5 1 1 6 N
+S -50 105 0 95 1 1 6 N
+S -50 205 0 195 1 1 6 N
+S -50 250 50 -350 1 1 10 f
+X Pin_1 1 -200 200 150 R 50 50 1 1 P
+X Pin_2 2 -200 100 150 R 50 50 1 1 P
+X Pin_3 3 -200 0 150 R 50 50 1 1 P
+X Pin_4 4 -200 -100 150 R 50 50 1 1 P
+X Pin_5 5 -200 -200 150 R 50 50 1 1 P
+X Pin_6 6 -200 -300 150 R 50 50 1 1 P
+ENDDRAW
+ENDDEF
+#
+# Conn_01x08_Female-Connector
+#
+DEF Conn_01x08_Female-Connector J 0 40 Y N 1 F N
+F0 "J" 0 400 50 H V C CNN
+F1 "Conn_01x08_Female-Connector" 0 -500 50 H V C CNN
+F2 "" 0 0 50 H I C CNN
+F3 "" 0 0 50 H I C CNN
+$FPLIST
+ Connector*:*_1x??_*
+$ENDFPLIST
+DRAW
+A 0 -400 20 901 -901 1 1 6 N 0 -380 0 -420
+A 0 -300 20 901 -901 1 1 6 N 0 -280 0 -320
+A 0 -200 20 901 -901 1 1 6 N 0 -180 0 -220
+A 0 -100 20 901 -901 1 1 6 N 0 -80 0 -120
+P 2 1 1 6 -50 -400 -20 -400 N
+P 2 1 1 6 -50 -300 -20 -300 N
+P 2 1 1 6 -50 -200 -20 -200 N
+P 2 1 1 6 -50 -100 -20 -100 N
+P 2 1 1 6 -50 0 -20 0 N
+P 2 1 1 6 -50 100 -20 100 N
+P 2 1 1 6 -50 200 -20 200 N
+P 2 1 1 6 -50 300 -20 300 N
+A 0 0 20 901 -901 1 1 6 N 0 20 0 -20
+A 0 100 20 901 -901 1 1 6 N 0 120 0 80
+A 0 200 20 901 -901 1 1 6 N 0 220 0 180
+A 0 300 20 901 -901 1 1 6 N 0 320 0 280
+X Pin_1 1 -200 300 150 R 50 50 1 1 P
+X Pin_2 2 -200 200 150 R 50 50 1 1 P
+X Pin_3 3 -200 100 150 R 50 50 1 1 P
+X Pin_4 4 -200 0 150 R 50 50 1 1 P
+X Pin_5 5 -200 -100 150 R 50 50 1 1 P
+X Pin_6 6 -200 -200 150 R 50 50 1 1 P
+X Pin_7 7 -200 -300 150 R 50 50 1 1 P
+X Pin_8 8 -200 -400 150 R 50 50 1 1 P
+ENDDRAW
+ENDDEF
+#
+# DB9_Female-Connector
+#
+DEF DB9_Female-Connector J 0 40 Y N 1 F N
+F0 "J" 0 550 50 H V C CNN
+F1 "DB9_Female-Connector" 0 -575 50 H V C CNN
+F2 "" 0 0 50 H I C CNN
+F3 "" 0 0 50 H I C CNN
+$FPLIST
+ DSUB*Female*
+$ENDFPLIST
+DRAW
+C -70 -400 30 0 1 0 N
+C -70 -200 30 0 1 0 N
+C -70 0 30 0 1 0 N
+C -70 200 30 0 1 0 N
+C -70 400 30 0 1 0 N
+P 2 0 1 0 -150 -400 -100 -400 N
+P 2 0 1 0 -150 -300 20 -300 N
+P 2 0 1 0 -150 -200 -100 -200 N
+P 2 0 1 0 -150 -100 20 -100 N
+P 2 0 1 0 -150 0 -100 0 N
+P 2 0 1 0 -150 100 20 100 N
+P 2 0 1 0 -150 200 -100 200 N
+P 2 0 1 0 -150 300 20 300 N
+P 2 0 1 0 -150 400 -100 400 N
+P 5 0 1 10 -150 525 -150 -525 150 -375 150 375 -150 525 f
+C 50 -300 30 0 1 0 N
+C 50 -100 30 0 1 0 N
+C 50 100 30 0 1 0 N
+C 50 300 30 0 1 0 N
+X 1 1 -300 400 150 R 50 50 1 1 P
+X 2 2 -300 200 150 R 50 50 1 1 P
+X 3 3 -300 0 150 R 50 50 1 1 P
+X 4 4 -300 -200 150 R 50 50 1 1 P
+X 5 5 -300 -400 150 R 50 50 1 1 P
+X 6 6 -300 300 150 R 50 50 1 1 P
+X 7 7 -300 100 150 R 50 50 1 1 P
+X 8 8 -300 -100 150 R 50 50 1 1 P
+X 9 9 -300 -300 150 R 50 50 1 1 P
+ENDDRAW
+ENDDEF
+#
+# DB9_Male-Connector
+#
+DEF DB9_Male-Connector J 0 40 Y N 1 F N
+F0 "J" 0 550 50 H V C CNN
+F1 "DB9_Male-Connector" 0 -575 50 H V C CNN
+F2 "" 0 0 50 H I C CNN
+F3 "" 0 0 50 H I C CNN
+$FPLIST
+ DSUB*Male*
+$ENDFPLIST
+DRAW
+C -70 -400 30 0 1 0 F
+C -70 -200 30 0 1 0 F
+C -70 0 30 0 1 0 F
+C -70 200 30 0 1 0 F
+C -70 400 30 0 1 0 F
+P 2 0 1 0 -150 -400 -100 -400 N
+P 2 0 1 0 -150 -300 20 -300 N
+P 2 0 1 0 -150 -200 -100 -200 N
+P 2 0 1 0 -150 -100 20 -100 N
+P 2 0 1 0 -150 0 -100 0 N
+P 2 0 1 0 -150 100 20 100 N
+P 2 0 1 0 -150 200 -100 200 N
+P 2 0 1 0 -150 300 20 300 N
+P 2 0 1 0 -150 400 -100 400 N
+P 5 0 1 10 -150 -525 -150 525 150 375 150 -375 -150 -525 f
+C 50 -300 30 0 1 0 F
+C 50 -100 30 0 1 0 F
+C 50 100 30 0 1 0 F
+C 50 300 30 0 1 0 F
+X 1 1 -300 -400 150 R 50 50 1 1 P
+X 2 2 -300 -200 150 R 50 50 1 1 P
+X 3 3 -300 0 150 R 50 50 1 1 P
+X 4 4 -300 200 150 R 50 50 1 1 P
+X 5 5 -300 400 150 R 50 50 1 1 P
+X 6 6 -300 -300 150 R 50 50 1 1 P
+X 7 7 -300 -100 150 R 50 50 1 1 P
+X 8 8 -300 100 150 R 50 50 1 1 P
+X 9 9 -300 300 150 R 50 50 1 1 P
+ENDDRAW
+ENDDEF
+#
+# GND-power
+#
+DEF GND-power #PWR 0 0 Y Y 1 F P
+F0 "#PWR" 0 -250 50 H I C CNN
+F1 "GND-power" 0 -150 50 H V C CNN
+F2 "" 0 0 50 H I C CNN
+F3 "" 0 0 50 H I C CNN
+DRAW
+P 6 0 1 0 0 0 0 -50 50 -50 0 -100 -50 -50 0 -50 N
+X GND 1 0 0 0 D 50 50 1 1 W N
+ENDDRAW
+ENDDEF
+#
+# ISO1050DUB-Interface_CAN_LIN
+#
+DEF ISO1050DUB-Interface_CAN_LIN U 0 20 Y Y 1 F N
+F0 "U" -250 250 50 H V C CNN
+F1 "ISO1050DUB-Interface_CAN_LIN" 100 250 50 H V C CNN
+F2 "Package_SO:SOP-8_6.62x9.15mm_P2.54mm" 0 -350 50 H I C CIN
+F3 "" 0 -50 50 H I C CNN
+$FPLIST
+ SOP*6.62x9.15mm*P2.54mm*
+$ENDFPLIST
+DRAW
+S -300 200 300 -300 0 1 10 f
+P 2 0 1 0 0 -200 0 -250 N
+P 2 0 1 0 0 -100 0 -150 N
+P 2 0 1 0 0 0 0 -50 N
+P 2 0 1 0 0 100 0 50 N
+P 2 0 1 0 0 200 0 150 N
+X VCC1 1 -400 100 100 R 50 50 1 1 W
+X RXD 2 -400 0 100 R 50 50 1 1 O
+X TXD 3 -400 -100 100 R 50 50 1 1 I
+X GND1 4 -400 -200 100 R 50 50 1 1 W
+X GND2 5 400 -200 100 L 50 50 1 1 W
+X CANL 6 400 -100 100 L 50 50 1 1 B
+X CANH 7 400 0 100 L 50 50 1 1 B
+X VCC2 8 400 100 100 L 50 50 1 1 W
+ENDDRAW
+ENDDEF
+#
+# LM1117-3.3-Regulator_Linear
+#
+DEF LM1117-3.3-Regulator_Linear U 0 10 Y Y 1 F N
+F0 "U" -150 125 50 H V C CNN
+F1 "LM1117-3.3-Regulator_Linear" 0 125 50 H V L CNN
+F2 "" 0 0 50 H I C CNN
+F3 "" 0 0 50 H I C CNN
+$FPLIST
+ SOT?223*
+ TO?263*
+ TO?252*
+ TO?220*
+$ENDFPLIST
+DRAW
+S -200 -200 200 75 0 1 10 f
+X GND 1 0 -300 100 U 50 50 1 1 W
+X VO 2 300 0 100 L 50 50 1 1 w
+X VI 3 -300 0 100 R 50 50 1 1 W
+ENDDRAW
+ENDDEF
+#
+# MAX3485-Interface_UART
+#
+DEF MAX3485-Interface_UART U 0 20 Y Y 1 F N
+F0 "U" -240 450 50 H V C CNN
+F1 "MAX3485-Interface_UART" 30 450 50 H V L CNN
+F2 "" 0 -700 50 H I C CNN
+F3 "" 0 50 50 H I C CNN
+$FPLIST
+ DIP*W7.62mm*
+ SOIC*3.9x4.9mm*P1.27mm*
+$ENDFPLIST
+DRAW
+S -300 400 300 -500 0 1 10 f
+C -12 -145 14 0 1 10 F
+C -1 59 14 0 1 10 F
+P 2 0 1 10 -160 -200 -75 -200 N
+P 2 0 1 10 -160 100 -50 100 N
+P 2 0 1 10 -50 -126 -50 -136 N
+P 2 0 1 10 -25 -200 210 -200 N
+P 3 0 1 10 -160 -100 -50 -100 -50 -125 N
+P 3 0 1 10 0 50 0 0 -160 0 N
+P 3 0 1 10 50 125 150 125 150 -200 N
+P 3 0 1 10 100 75 100 -150 0 -150 N
+P 4 0 1 10 -75 -125 -75 -225 25 -175 -75 -125 N
+P 4 0 1 10 -50 100 50 150 50 50 -50 100 N
+P 4 0 1 10 75 75 175 75 175 100 210 100 N
+S 50 125 50 125 0 1 0 N
+C 65 75 14 0 1 10 F
+X RO 1 -400 100 100 R 50 50 1 1 O
+X ~{RE} 2 -400 0 100 R 50 50 1 1 I
+X DE 3 -400 -100 100 R 50 50 1 1 I
+X DI 4 -400 -200 100 R 50 50 1 1 I
+X GND 5 0 -600 100 U 50 50 1 1 W
+X A 6 400 -200 100 L 50 50 1 1 B
+X B 7 400 100 100 L 50 50 1 1 B
+X VCC 8 0 500 100 D 50 50 1 1 W
+ENDDRAW
+ENDDEF
+#
+# MCP2551-I-SN-Interface_CAN_LIN
+#
+DEF MCP2551-I-SN-Interface_CAN_LIN U 0 40 Y Y 1 F N
+F0 "U" -400 350 50 H V L CNN
+F1 "MCP2551-I-SN-Interface_CAN_LIN" 100 350 50 H V L CNN
+F2 "Package_SO:SOIC-8_3.9x4.9mm_P1.27mm" 0 -500 50 H I C CIN
+F3 "" 0 0 50 H I C CNN
+$FPLIST
+ SOIC*P1.27mm*
+$ENDFPLIST
+DRAW
+S -400 300 400 -300 0 1 10 f
+X TXD 1 -500 200 100 R 50 50 1 1 I
+X VSS 2 0 -400 100 U 50 50 1 1 W
+X VDD 3 0 400 100 D 50 50 1 1 W
+X RXD 4 -500 100 100 R 50 50 1 1 O
+X Vref 5 -500 -100 100 R 50 50 1 1 w
+X CANL 6 500 -100 100 L 50 50 1 1 B
+X CANH 7 500 100 100 L 50 50 1 1 B
+X Rs 8 -500 -200 100 R 50 50 1 1 I
+ENDDRAW
+ENDDEF
+#
+# PESD3V3L4UG-Power_Protection
+#
+DEF PESD3V3L4UG-Power_Protection D 0 20 N N 4 L N
+F0 "D" 0 100 50 H V C CNN
+F1 "PESD3V3L4UG-Power_Protection" 0 -100 50 H V C CNN
+F2 "Package_TO_SOT_SMD:SOT-353_SC-70-5" 0 0 50 H I C CNN
+F3 "" 0 0 50 H I C CNN
+$FPLIST
+ SOT?353*
+$ENDFPLIST
+DRAW
+P 2 0 1 0 -40 0 40 0 N
+P 3 0 1 0 -40 40 -40 -40 -20 -40 N
+P 4 0 1 0 40 40 -40 0 40 -40 40 40 N
+X K1 1 -100 0 100 R 50 50 1 1 P
+X A 2 100 0 100 L 50 50 1 1 P
+X K2 3 -100 0 100 R 50 50 2 1 P
+X K3 4 -100 0 100 R 50 50 3 1 P
+X K4 6 -100 0 100 R 50 50 4 1 P
+ENDDRAW
+ENDDEF
+#
+# PWR_FLAG-power
+#
+DEF PWR_FLAG-power #FLG 0 0 N N 1 F P
+F0 "#FLG" 0 75 50 H I C CNN
+F1 "PWR_FLAG-power" 0 150 50 H V C CNN
+F2 "" 0 0 50 H I C CNN
+F3 "" 0 0 50 H I C CNN
+DRAW
+P 6 0 1 0 0 0 0 50 -40 75 0 100 40 75 0 50 N
+X pwr 1 0 0 0 U 50 50 0 0 w
+ENDDRAW
+ENDDEF
+#
+# STM32F072CBTx-MCU_ST_STM32F0
+#
+DEF STM32F072CBTx-MCU_ST_STM32F0 U 0 20 Y Y 1 F N
+F0 "U" -600 1450 50 H V L CNN
+F1 "STM32F072CBTx-MCU_ST_STM32F0" 300 1450 50 H V L CNN
+F2 "Package_QFP:LQFP-48_7x7mm_P0.5mm" -600 -1400 50 H I R CNN
+F3 "" 0 0 50 H I C CNN
+$FPLIST
+ LQFP*7x7mm*P0.5mm*
+$ENDFPLIST
+DRAW
+S -600 -1400 500 1400 0 1 10 f
+X VBAT 1 -200 1500 100 D 50 50 1 1 W
+X PA0 10 600 200 100 L 50 50 1 1 B
+X PA1 11 600 100 100 L 50 50 1 1 B
+X PA2 12 600 0 100 L 50 50 1 1 B
+X PA3 13 600 -100 100 L 50 50 1 1 B
+X PA4 14 600 -200 100 L 50 50 1 1 B
+X PA5 15 600 -300 100 L 50 50 1 1 B
+X PA6 16 600 -400 100 L 50 50 1 1 B
+X PA7 17 600 -500 100 L 50 50 1 1 B
+X PB0 18 -700 200 100 R 50 50 1 1 B
+X PB1 19 -700 100 100 R 50 50 1 1 B
+X PC13 2 -700 600 100 R 50 50 1 1 B
+X PB2 20 -700 0 100 R 50 50 1 1 B
+X PB10 21 -700 -800 100 R 50 50 1 1 B
+X PB11 22 -700 -900 100 R 50 50 1 1 B
+X VSS 23 -200 -1500 100 U 50 50 1 1 W
+X VDD 24 -100 1500 100 D 50 50 1 1 W
+X PB12 25 -700 -1000 100 R 50 50 1 1 B
+X PB13 26 -700 -1100 100 R 50 50 1 1 B
+X PB14 27 -700 -1200 100 R 50 50 1 1 B
+X PB15 28 -700 -1300 100 R 50 50 1 1 B
+X PA8 29 600 -600 100 L 50 50 1 1 B
+X PC14 3 -700 500 100 R 50 50 1 1 B
+X PA9 30 600 -700 100 L 50 50 1 1 B
+X PA10 31 600 -800 100 L 50 50 1 1 B
+X PA11 32 600 -900 100 L 50 50 1 1 B
+X PA12 33 600 -1000 100 L 50 50 1 1 B
+X PA13 34 600 -1100 100 L 50 50 1 1 B
+X VSS 35 -100 -1500 100 U 50 50 1 1 W
+X VDDIO2 36 200 1500 100 D 50 50 1 1 W
+X PA14 37 600 -1200 100 L 50 50 1 1 B
+X PA15 38 600 -1300 100 L 50 50 1 1 B
+X PB3 39 -700 -100 100 R 50 50 1 1 B
+X PC15 4 -700 400 100 R 50 50 1 1 B
+X PB4 40 -700 -200 100 R 50 50 1 1 B
+X PB5 41 -700 -300 100 R 50 50 1 1 B
+X PB6 42 -700 -400 100 R 50 50 1 1 B
+X PB7 43 -700 -500 100 R 50 50 1 1 B
+X BOOT0 44 -700 1100 100 R 50 50 1 1 I
+X PB8 45 -700 -600 100 R 50 50 1 1 B
+X PB9 46 -700 -700 100 R 50 50 1 1 B
+X VSS 47 0 -1500 100 U 50 50 1 1 W
+X VDD 48 0 1500 100 D 50 50 1 1 W
+X PF0 5 -700 900 100 R 50 50 1 1 I
+X PF1 6 -700 800 100 R 50 50 1 1 I
+X NRST 7 -700 1300 100 R 50 50 1 1 I
+X VSSA 8 100 -1500 100 U 50 50 1 1 W
+X VDDA 9 100 1500 100 D 50 50 1 1 W
+ENDDRAW
+ENDDEF
+#
+# SW_DIP_x01-Switch
+#
+DEF SW_DIP_x01-Switch SW 0 0 Y N 1 F N
+F0 "SW" 0 150 50 H V C CNN
+F1 "SW_DIP_x01-Switch" 0 -150 50 H V C CNN
+F2 "" 0 0 50 H I C CNN
+F3 "" 0 0 50 H I C CNN
+$FPLIST
+ SW?DIP?x1*
+$ENDFPLIST
+DRAW
+C -80 0 20 0 0 0 N
+P 2 0 0 0 -60 5 93 46 N
+C 80 0 20 0 0 0 N
+S -150 100 150 -100 0 1 10 f
+X ~ 1 -300 0 200 R 50 50 1 1 P
+X ~ 2 300 0 200 L 50 50 1 1 P
+ENDDRAW
+ENDDEF
+#
+# SW_DIP_x04-Switch
+#
+DEF SW_DIP_x04-Switch SW 0 0 Y N 1 F N
+F0 "SW" 0 350 50 H V C CNN
+F1 "SW_DIP_x04-Switch" 0 -250 50 H V C CNN
+F2 "" 0 0 50 H I C CNN
+F3 "" 0 0 50 H I C CNN
+$FPLIST
+ SW?DIP?x4*
+$ENDFPLIST
+DRAW
+C -80 -100 20 0 0 0 N
+C -80 0 20 0 0 0 N
+C -80 100 20 0 0 0 N
+C -80 200 20 0 0 0 N
+P 2 0 0 0 -60 -94 93 -53 N
+P 2 0 0 0 -60 5 93 46 N
+P 2 0 0 0 -60 105 93 146 N
+P 2 0 0 0 -60 205 93 246 N
+C 80 -100 20 0 0 0 N
+C 80 0 20 0 0 0 N
+C 80 100 20 0 0 0 N
+C 80 200 20 0 0 0 N
+S -150 300 150 -200 0 1 10 f
+X ~ 1 -300 200 200 R 50 50 1 1 P
+X ~ 2 -300 100 200 R 50 50 1 1 P
+X ~ 3 -300 0 200 R 50 50 1 1 P
+X ~ 4 -300 -100 200 R 50 50 1 1 P
+X ~ 5 300 -100 200 L 50 50 1 1 P
+X ~ 6 300 0 200 L 50 50 1 1 P
+X ~ 7 300 100 200 L 50 50 1 1 P
+X ~ 8 300 200 200 L 50 50 1 1 P
+ENDDRAW
+ENDDEF
+#
+# Screw_Terminal_01x02-Connector
+#
+DEF Screw_Terminal_01x02-Connector J 0 40 Y N 1 F N
+F0 "J" 0 100 50 H V C CNN
+F1 "Screw_Terminal_01x02-Connector" 0 -200 50 H V C CNN
+F2 "" 0 0 50 H I C CNN
+F3 "" 0 0 50 H I C CNN
+$FPLIST
+ TerminalBlock*:*
+$ENDFPLIST
+DRAW
+S -50 50 50 -150 1 1 10 f
+C 0 -100 25 1 1 6 N
+P 2 1 1 6 -21 -87 13 -120 N
+P 2 1 1 6 -21 13 13 -20 N
+P 2 1 1 6 -14 -80 20 -113 N
+P 2 1 1 6 -14 20 20 -13 N
+C 0 0 25 1 1 6 N
+X Pin_1 1 -200 0 150 R 50 50 1 1 P
+X Pin_2 2 -200 -100 150 R 50 50 1 1 P
+ENDDRAW
+ENDDEF
+#
+# TestPoint-Connector
+#
+DEF TestPoint-Connector TP 0 30 N N 1 F N
+F0 "TP" 0 270 50 H V C CNN
+F1 "TestPoint-Connector" 0 200 50 H V C CNN
+F2 "" 200 0 50 H I C CNN
+F3 "" 200 0 50 H I C CNN
+$FPLIST
+ Pin*
+ Test*
+$ENDFPLIST
+DRAW
+C 0 130 30 0 1 0 N
+X 1 1 0 0 100 U 50 50 1 1 P
+ENDDRAW
+ENDDEF
+#
+# USB6B1-Power_Protection
+#
+DEF USB6B1-Power_Protection U 0 20 Y Y 1 F N
+F0 "U" 250 250 50 H V C CNN
+F1 "USB6B1-Power_Protection" 200 -250 50 H V C CNN
+F2 "Package_SO:SOIC-8_3.9x4.9mm_P1.27mm" 0 0 50 H I C CNN
+F3 "" -950 -100 50 H I C CNN
+$FPLIST
+ SOIC*3.9x4.9mm*P1.27mm*
+$ENDFPLIST
+DRAW
+S -300 -200 300 200 0 1 10 f
+X VBUS 1 0 300 100 D 50 50 1 1 P N
+X I/O1 2 -400 100 100 R 50 50 1 1 P
+X I/O2 3 -400 -100 100 R 50 50 1 1 P
+X GND 4 0 -300 100 U 50 50 1 1 P N
+X GND 5 0 -300 100 U 50 50 1 1 P
+X I/O2 6 400 -100 100 L 50 50 1 1 P
+X I/O1 7 400 100 100 L 50 50 1 1 P
+X VBUS 8 0 300 100 D 50 50 1 1 P
+ENDDRAW
+ENDDEF
+#
+# USB_B-Connector
+#
+DEF USB_B-Connector J 0 40 Y Y 1 F N
+F0 "J" -200 450 50 H V L CNN
+F1 "USB_B-Connector" -200 350 50 H V L CNN
+F2 "" 150 -50 50 H I C CNN
+F3 "" 150 -50 50 H I C CNN
+$FPLIST
+ USB*
+$ENDFPLIST
+DRAW
+S -200 -300 200 300 0 1 10 f
+C -150 85 25 0 1 10 F
+S -150 220 -100 180 0 1 0 F
+C -25 135 15 0 1 10 F
+S -5 -300 5 -270 0 1 0 N
+P 2 0 1 10 -75 85 25 85 N
+P 4 0 1 10 -125 85 -100 85 -50 135 -25 135 N
+P 4 0 1 10 -100 85 -75 85 -50 35 0 35 N
+P 4 0 1 10 25 110 25 60 75 85 25 110 F
+P 7 0 1 0 -160 170 -90 170 -90 225 -105 240 -145 240 -160 225 -160 170 N
+S 10 50 -20 20 0 1 10 F
+S 200 -105 170 -95 0 1 0 N
+S 200 -5 170 5 0 1 0 N
+S 200 195 170 205 0 1 0 N
+X VBUS 1 300 200 100 L 50 50 1 1 w
+X D- 2 300 -100 100 L 50 50 1 1 P
+X D+ 3 300 0 100 L 50 50 1 1 P
+X GND 4 0 -400 100 U 50 50 1 1 w
+X Shield 5 -100 -400 100 U 50 50 1 1 P
+ENDDRAW
+ENDDEF
+#
+#End Library

F0:F030,F042,F072/deprecated/CANbus_stepper/kicad/stm32.csv

@@ -0,0 +1,122 @@
+"Source:","/home/eddy/Yandex.Disk/Projects/stm32samples/F0-nolib/CANbus_stepper/kicad/stm32.sch"
+"Date:","÷Ô 10 ÍÁÒ 2020 09:31:14"
+"Tool:","Eeschema 5.1.4"
+"Generator:","/usr/local/share/kicad/plugins/bom_csv_grouped_by_value.py"
+"Component Count:","66"
+
+"Individual Components:"
+
+"Item","Qty","Reference(s)","Value","LibPart","Footprint","Datasheet"
+"","","C1","0.1","Device:C","Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder",""
+"","","C2","100uF","Device:CP","Capacitor_THT:CP_Radial_D8.0mm_P3.50mm","~"
+"","","C3","0.1","Device:C","Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder",""
+"","","C4","47uF, 10V","Device:CP","Capacitor_Tantalum_SMD:CP_EIA-6032-28_Kemet-C_Pad2.25x2.35mm_HandSolder","~"
+"","","C5","0.1","Device:C","Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder",""
+"","","C6","47uF, 10V","Device:CP","Capacitor_Tantalum_SMD:CP_EIA-6032-28_Kemet-C_Pad2.25x2.35mm_HandSolder","~"
+"","","C7","0.1","Device:C","Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder",""
+"","","C8","0.1","Device:C","Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder",""
+"","","C9","0.1","Device:C","Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder",""
+"","","C10","0.1","Device:C","Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder",""
+"","","C11","0.1","Device:C","Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder",""
+"","","C12","0.1","Device:C","Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder",""
+"","","D1","MBRS130L","Device:D_Schottky","Diode_SMD:D_SMB_Handsoldering",""
+"","","D2","MBRS130L","Device:D_Schottky","Diode_SMD:D_SMB_Handsoldering",""
+"","","D3","PESD3V3L4UG","Power_Protection:PESD3V3L4UG","TO_SOT_Packages_SMD:SOT-363_SC-70-6_Handsoldering","https://assets.nexperia.com/documents/data-sheet/PESDXL4UF_G_W.pdf"
+"","","D4","PESD1CAN","elements:PESD1CAN","TO_SOT_Packages_SMD:SOT-23_Handsoldering",""
+"","","D5","MM3Z7V5","Device:D_Zener","Diode_SMD:D_0805_2012Metric_Pad1.15x1.40mm_HandSolder","~"
+"","","D6","USB6B1","Power_Protection:USB6B1","Package_SO:SOIC-8_3.9x4.9mm_P1.27mm",""
+"","","D7","MM3Z3V9","Device:D_Zener","Diode_SMD:D_0805_2012Metric_Pad1.15x1.40mm_HandSolder",""
+"","","D8","MM3Z3V9","Device:D_Zener","Diode_SMD:D_0805_2012Metric_Pad1.15x1.40mm_HandSolder",""
+"","","F1","1A","Device:Fuse","MyFootprints:FuseHolder","~"
+"","","J1","A","Connector:Screw_Terminal_01x02","TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal",""
+"","","J2","B","Connector:Screw_Terminal_01x02","TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal",""
+"","","J3","Conn_01x08_Female","Connector:Conn_01x08_Female","Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical","~"
+"","","J4","Conn_01x08_Female","Connector:Conn_01x08_Female","Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical","~"
+"","","J5","+/-","Connector:Screw_Terminal_01x02","TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal",""
+"","","J6","CONN_02X03","Switch:SW_DIP_x04","Button_Switch_THT:SW_DIP_SPSTx04_Slide_9.78x12.34mm_W7.62mm_P2.54mm",""
+"","","J7","0/1","Connector:Screw_Terminal_01x02","TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal",""
+"","","J8","2/3","Connector:Screw_Terminal_01x02","TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal",""
+"","","J9","DB9_Female","Connector:DB9_Female","Connector_Dsub:DSUB-9_Female_Horizontal_P2.77x2.84mm_EdgePinOffset4.94mm_Housed_MountingHolesOffset7.48mm",""
+"","","J10","12v","Connector:Screw_Terminal_01x02","TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal",""
+"","","J11","DB9_Male","Connector:DB9_Male","Connector_Dsub:DSUB-9_Male_Horizontal_P2.77x2.84mm_EdgePinOffset4.94mm_Housed_MountingHolesOffset7.48mm",""
+"","","J12","RS-485","Connector:Screw_Terminal_01x02","TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal",""
+"","","J13","Conn_01x06","Connector_Generic:Conn_01x06","Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical","~"
+"","","P1","USB_A","Connector:USB_B","Connectors_USB:USB_B_OST_USB-B1HSxx_Horizontal",""
+"","","P2","Hole","Connector_Generic:Conn_01x01","MountingHole:MountingHole_3.2mm_M3",""
+"","","P3","Hole","Connector_Generic:Conn_01x01","MountingHole:MountingHole_3.2mm_M3",""
+"","","P4","Hole","Connector_Generic:Conn_01x01","MountingHole:MountingHole_3.2mm_M3",""
+"","","P5","Hole","Connector_Generic:Conn_01x01","MountingHole:MountingHole_3.2mm_M3",""
+"","","Q1","SI2305","Device:Q_PMOS_GSD","TO_SOT_Packages_SMD:SOT-23_Handsoldering","~"
+"","","Q2","AO3407","Device:Q_PMOS_GSD","TO_SOT_Packages_SMD:SOT-23_Handsoldering",""
+"","","R1","330","Device:R","Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder","~"
+"","","R2","10k","Device:R","Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder","~"
+"","","R3","120","Device:R","Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder","~"
+"","","R4","15k","Device:R","Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder",""
+"","","R5","330","Device:R","Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder","~"
+"","","R6","330","Device:R","Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder","~"
+"","","R7","330","Device:R","Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder","~"
+"","","R8","330","Device:R","Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder","~"
+"","","R9","120","Device:R","Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder",""
+"","","R10","10k","Device:R","Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder","~"
+"","","R11","22","Device:R","Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder",""
+"","","R12","22","Device:R","Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder",""
+"","","R13","220k","Device:R","Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder",""
+"","","R14","56k","Device:R","Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder",""
+"","","R15","47k","Device:R","Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder",""
+"","","R16","47k","Device:R","Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder",""
+"","","R17","47k","Device:R","Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder",""
+"","","R18","22","Device:R","Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder","~"
+"","","SW1","SW_DIP_x01","Switch:SW_DIP_x01","Button_Switch_THT:SW_DIP_SPSTx01_Slide_6.7x4.1mm_W7.62mm_P2.54mm_LowProfile","~"
+"","","U1","ISO1050DUB","Interface_CAN_LIN:ISO1050DUB","Package_SO:SOP-8_6.62x9.15mm_P2.54mm","http://www.ti.com/lit/ds/symlink/iso1050.pdf"
+"","","U2","LM1117-5.0","Regulator_Linear:LM1117-3.3","TO_SOT_Packages_SMD:SOT-223-3_TabPin2",""
+"","","U3","LM1117-3.3","Regulator_Linear:LM1117-3.3","TO_SOT_Packages_SMD:SOT-223-3_TabPin2",""
+"","","U4","MCP2551-I/SN","Interface_CAN_LIN:MCP2551-I-SN","Package_SO:SOIC-8_3.9x4.9mm_P1.27mm",""
+"","","U5","STM32F072CBTx","MCU_ST_STM32F0:STM32F072CBTx","Package_QFP:LQFP-48_7x7mm_P0.5mm","http://www.st.com/st-web-ui/static/active/en/resource/technical/document/datasheet/DM00090510.pdf"
+"","","U6","MAX3485","Interface_UART:MAX3485","Package_SO:SO-8_3.9x4.9mm_P1.27mm","https://datasheets.maximintegrated.com/en/ds/MAX3483-MAX3491.pdf"
+
+
+
+"Collated Components:"
+
+"Item","Qty","Reference(s)","Value","LibPart","Footprint","Datasheet"
+"1","9","C1, C3, C5, C7, C8, C9, C10, C11, C12","0.1","Device:C","Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder",""
+"2","1","C2","100uF","Device:CP","Capacitor_THT:CP_Radial_D8.0mm_P3.50mm","~"
+"3","2","C4, C6","47uF, 10V","Device:CP","Capacitor_Tantalum_SMD:CP_EIA-6032-28_Kemet-C_Pad2.25x2.35mm_HandSolder","~"
+"4","2","D1, D2","MBRS130L","Device:D_Schottky","Diode_SMD:D_SMB_Handsoldering",""
+"5","1","D3","PESD3V3L4UG","Power_Protection:PESD3V3L4UG","TO_SOT_Packages_SMD:SOT-363_SC-70-6_Handsoldering","https://assets.nexperia.com/documents/data-sheet/PESDXL4UF_G_W.pdf"
+"6","1","D4","PESD1CAN","elements:PESD1CAN","TO_SOT_Packages_SMD:SOT-23_Handsoldering",""
+"7","1","D5","MM3Z7V5","Device:D_Zener","Diode_SMD:D_0805_2012Metric_Pad1.15x1.40mm_HandSolder","~"
+"8","1","D6","USB6B1","Power_Protection:USB6B1","Package_SO:SOIC-8_3.9x4.9mm_P1.27mm",""
+"9","2","D7, D8","MM3Z3V9","Device:D_Zener","Diode_SMD:D_0805_2012Metric_Pad1.15x1.40mm_HandSolder",""
+"10","1","F1","1A","Device:Fuse","MyFootprints:FuseHolder","~"
+"11","1","J1","A","Connector:Screw_Terminal_01x02","TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal",""
+"12","1","J2","B","Connector:Screw_Terminal_01x02","TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal",""
+"13","2","J3, J4","Conn_01x08_Female","Connector:Conn_01x08_Female","Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical","~"
+"14","1","J5","+/-","Connector:Screw_Terminal_01x02","TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal",""
+"15","1","J6","CONN_02X03","Switch:SW_DIP_x04","Button_Switch_THT:SW_DIP_SPSTx04_Slide_9.78x12.34mm_W7.62mm_P2.54mm",""
+"16","1","J7","0/1","Connector:Screw_Terminal_01x02","TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal",""
+"17","1","J8","2/3","Connector:Screw_Terminal_01x02","TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal",""
+"18","1","J9","DB9_Female","Connector:DB9_Female","Connector_Dsub:DSUB-9_Female_Horizontal_P2.77x2.84mm_EdgePinOffset4.94mm_Housed_MountingHolesOffset7.48mm",""
+"19","1","J10","12v","Connector:Screw_Terminal_01x02","TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal",""
+"20","1","J11","DB9_Male","Connector:DB9_Male","Connector_Dsub:DSUB-9_Male_Horizontal_P2.77x2.84mm_EdgePinOffset4.94mm_Housed_MountingHolesOffset7.48mm",""
+"21","1","J12","RS-485","Connector:Screw_Terminal_01x02","TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_Horizontal",""
+"22","1","J13","Conn_01x06","Connector_Generic:Conn_01x06","Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical","~"
+"23","1","P1","USB_A","Connector:USB_B","Connectors_USB:USB_B_OST_USB-B1HSxx_Horizontal",""
+"24","4","P2, P3, P4, P5","Hole","Connector_Generic:Conn_01x01","MountingHole:MountingHole_3.2mm_M3",""
+"25","1","Q1","SI2305","Device:Q_PMOS_GSD","TO_SOT_Packages_SMD:SOT-23_Handsoldering","~"
+"26","1","Q2","AO3407","Device:Q_PMOS_GSD","TO_SOT_Packages_SMD:SOT-23_Handsoldering",""
+"27","5","R1, R5, R6, R7, R8","330","Device:R","Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder","~"
+"28","2","R2, R10","10k","Device:R","Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder","~"
+"29","2","R3, R9","120","Device:R","Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder","~"
+"30","1","R4","15k","Device:R","Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder",""
+"31","3","R11, R12, R18","22","Device:R","Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder","~"
+"32","1","R13","220k","Device:R","Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder",""
+"33","1","R14","56k","Device:R","Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder",""
+"34","3","R15, R16, R17","47k","Device:R","Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder",""
+"35","1","SW1","SW_DIP_x01","Switch:SW_DIP_x01","Button_Switch_THT:SW_DIP_SPSTx01_Slide_6.7x4.1mm_W7.62mm_P2.54mm_LowProfile","~"
+"36","1","U1","ISO1050DUB","Interface_CAN_LIN:ISO1050DUB","Package_SO:SOP-8_6.62x9.15mm_P2.54mm","http://www.ti.com/lit/ds/symlink/iso1050.pdf"
+"37","1","U2","LM1117-5.0","Regulator_Linear:LM1117-3.3","TO_SOT_Packages_SMD:SOT-223-3_TabPin2",""
+"38","1","U3","LM1117-3.3","Regulator_Linear:LM1117-3.3","TO_SOT_Packages_SMD:SOT-223-3_TabPin2",""
+"39","1","U4","MCP2551-I/SN","Interface_CAN_LIN:MCP2551-I-SN","Package_SO:SOIC-8_3.9x4.9mm_P1.27mm",""
+"40","1","U5","STM32F072CBTx","MCU_ST_STM32F0:STM32F072CBTx","Package_QFP:LQFP-48_7x7mm_P0.5mm","http://www.st.com/st-web-ui/static/active/en/resource/technical/document/datasheet/DM00090510.pdf"
+"41","1","U6","MAX3485","Interface_UART:MAX3485","Package_SO:SO-8_3.9x4.9mm_P1.27mm","https://datasheets.maximintegrated.com/en/ds/MAX3483-MAX3491.pdf"

F0:F030,F042,F072/deprecated/CANbus_stepper/kicad/stm32.kicad_prl

@@ -0,0 +1,96 @@
+{
+  "board": {
+    "active_layer": 0,
+    "active_layer_preset": "",
+    "auto_track_width": true,
+    "hidden_netclasses": [],
+    "hidden_nets": [],
+    "high_contrast_mode": 0,
+    "net_color_mode": 1,
+    "opacity": {
+      "images": 0.6,
+      "pads": 1.0,
+      "tracks": 1.0,
+      "vias": 1.0,
+      "zones": 0.6
+    },
+    "ratsnest_display_mode": 0,
+    "selection_filter": {
+      "dimensions": true,
+      "footprints": true,
+      "graphics": true,
+      "keepouts": true,
+      "lockedItems": true,
+      "otherItems": true,
+      "pads": true,
+      "text": true,
+      "tracks": true,
+      "vias": true,
+      "zones": true
+    },
+    "visible_items": [
+      0,
+      1,
+      2,
+      3,
+      4,
+      5,
+      8,
+      9,
+      10,
+      11,
+      12,
+      13,
+      14,
+      15,
+      16,
+      17,
+      18,
+      19,
+      20,
+      21,
+      22,
+      23,
+      24,
+      25,
+      26,
+      27,
+      28,
+      29,
+      30,
+      32,
+      33,
+      34,
+      35,
+      36
+    ],
+    "visible_layers": "fffffff_ffffffff",
+    "zone_display_mode": 1
+  },
+  "git": {
+    "repo_password": "",
+    "repo_type": "",
+    "repo_username": "",
+    "ssh_key": ""
+  },
+  "meta": {
+    "filename": "stm32.kicad_prl",
+    "version": 3
+  },
+  "project": {
+    "files": []
+  },
+  "schematic": {
+    "selection_filter": {
+      "graphics": true,
+      "images": true,
+      "labels": true,
+      "lockedItems": false,
+      "otherItems": true,
+      "pins": true,
+      "symbols": true,
+      "text": true,
+      "wires": true
+    }
+  }
+}

F0:F030,F042,F072/deprecated/CANbus_stepper/kicad/stm32.kicad_pro

@@ -0,0 +1,903 @@
+{
+  "board": {
+    "3dviewports": [],
+    "design_settings": {
+      "defaults": {
+        "apply_defaults_to_fp_fields": false,
+        "apply_defaults_to_fp_shapes": false,
+        "apply_defaults_to_fp_text": false,
+        "board_outline_line_width": 0.15,
+        "copper_line_width": 0.2,
+        "copper_text_italic": false,
+        "copper_text_size_h": 1.5,
+        "copper_text_size_v": 1.5,
+        "copper_text_thickness": 0.3,
+        "copper_text_upright": false,
+        "courtyard_line_width": 0.05,
+        "dimension_precision": 4,
+        "dimension_units": 3,
+        "dimensions": {
+          "arrow_length": 1270000,
+          "extension_offset": 500000,
+          "keep_text_aligned": true,
+          "suppress_zeroes": false,
+          "text_position": 0,
+          "units_format": 1
+        },
+        "fab_line_width": 0.1,
+        "fab_text_italic": false,
+        "fab_text_size_h": 1.0,
+        "fab_text_size_v": 1.0,
+        "fab_text_thickness": 0.15,
+        "fab_text_upright": false,
+        "other_line_width": 0.1,
+        "other_text_italic": false,
+        "other_text_size_h": 1.0,
+        "other_text_size_v": 1.0,
+        "other_text_thickness": 0.15,
+        "other_text_upright": false,
+        "pads": {
+          "drill": 0.8,
+          "height": 1.5,
+          "width": 1.5
+        },
+        "silk_line_width": 0.15,
+        "silk_text_italic": false,
+        "silk_text_size_h": 1.0,
+        "silk_text_size_v": 1.0,
+        "silk_text_thickness": 0.15,
+        "silk_text_upright": false,
+        "zones": {
+          "min_clearance": 0.5
+        }
+      },
+      "diff_pair_dimensions": [],
+      "drc_exclusions": [],
+      "meta": {
+        "filename": "board_design_settings.json",
+        "version": 2
+      },
+      "rule_severities": {
+        "annular_width": "error",
+        "clearance": "error",
+        "connection_width": "warning",
+        "copper_edge_clearance": "error",
+        "copper_sliver": "warning",
+        "courtyards_overlap": "error",
+        "diff_pair_gap_out_of_range": "error",
+        "diff_pair_uncoupled_length_too_long": "error",
+        "drill_out_of_range": "error",
+        "duplicate_footprints": "warning",
+        "extra_footprint": "warning",
+        "footprint": "error",
+        "footprint_symbol_mismatch": "warning",
+        "footprint_type_mismatch": "ignore",
+        "hole_clearance": "error",
+        "hole_near_hole": "error",
+        "invalid_outline": "error",
+        "isolated_copper": "warning",
+        "item_on_disabled_layer": "error",
+        "items_not_allowed": "error",
+        "length_out_of_range": "error",
+        "lib_footprint_issues": "warning",
+        "lib_footprint_mismatch": "warning",
+        "malformed_courtyard": "error",
+        "microvia_drill_out_of_range": "error",
+        "missing_courtyard": "ignore",
+        "missing_footprint": "warning",
+        "net_conflict": "warning",
+        "npth_inside_courtyard": "ignore",
+        "padstack": "warning",
+        "pth_inside_courtyard": "ignore",
+        "shorting_items": "error",
+        "silk_edge_clearance": "warning",
+        "silk_over_copper": "warning",
+        "silk_overlap": "warning",
+        "skew_out_of_range": "error",
+        "solder_mask_bridge": "error",
+        "starved_thermal": "error",
+        "text_height": "warning",
+        "text_thickness": "warning",
+        "through_hole_pad_without_hole": "error",
+        "too_many_vias": "error",
+        "track_dangling": "warning",
+        "track_width": "error",
+        "tracks_crossing": "error",
+        "unconnected_items": "error",
+        "unresolved_variable": "error",
+        "via_dangling": "warning",
+        "zones_intersect": "error"
+      },
+      "rule_severitieslegacy_courtyards_overlap": true,
+      "rule_severitieslegacy_no_courtyard_defined": false,
+      "rules": {
+        "allow_blind_buried_vias": false,
+        "allow_microvias": false,
+        "max_error": 0.005,
+        "min_clearance": 0.0,
+        "min_connection": 0.0,
+        "min_copper_edge_clearance": 0.075,
+        "min_hole_clearance": 0.25,
+        "min_hole_to_hole": 0.25,
+        "min_microvia_diameter": 0.2,
+        "min_microvia_drill": 0.1,
+        "min_resolved_spokes": 2,
+        "min_silk_clearance": 0.0,
+        "min_text_height": 0.8,
+        "min_text_thickness": 0.08,
+        "min_through_hole_diameter": 0.5,
+        "min_track_width": 0.2,
+        "min_via_annular_width": 0.1,
+        "min_via_diameter": 0.8,
+        "solder_mask_clearance": 0.2,
+        "solder_mask_min_width": 0.0,
+        "solder_mask_to_copper_clearance": 0.0,
+        "solder_paste_clearance": 0.0,
+        "solder_paste_margin_ratio": -0.0,
+        "use_height_for_length_calcs": true
+      },
+      "teardrop_options": [
+        {
+          "td_onpadsmd": true,
+          "td_onroundshapesonly": false,
+          "td_ontrackend": false,
+          "td_onviapad": true
+        }
+      ],
+      "teardrop_parameters": [
+        {
+          "td_allow_use_two_tracks": true,
+          "td_curve_segcount": 0,
+          "td_height_ratio": 1.0,
+          "td_length_ratio": 0.5,
+          "td_maxheight": 2.0,
+          "td_maxlen": 1.0,
+          "td_on_pad_in_zone": false,
+          "td_target_name": "td_round_shape",
+          "td_width_to_size_filter_ratio": 0.9
+        },
+        {
+          "td_allow_use_two_tracks": true,
+          "td_curve_segcount": 0,
+          "td_height_ratio": 1.0,
+          "td_length_ratio": 0.5,
+          "td_maxheight": 2.0,
+          "td_maxlen": 1.0,
+          "td_on_pad_in_zone": false,
+          "td_target_name": "td_rect_shape",
+          "td_width_to_size_filter_ratio": 0.9
+        },
+        {
+          "td_allow_use_two_tracks": true,
+          "td_curve_segcount": 0,
+          "td_height_ratio": 1.0,
+          "td_length_ratio": 0.5,
+          "td_maxheight": 2.0,
+          "td_maxlen": 1.0,
+          "td_on_pad_in_zone": false,
+          "td_target_name": "td_track_end",
+          "td_width_to_size_filter_ratio": 0.9
+        }
+      ],
+      "track_widths": [
+        0.0,
+        0.2,
+        0.3,
+        0.5,
+        1.0,
+        2.0
+      ],
+      "tuning_pattern_settings": {
+        "diff_pair_defaults": {
+          "corner_radius_percentage": 80,
+          "corner_style": 1,
+          "max_amplitude": 1.0,
+          "min_amplitude": 0.2,
+          "single_sided": false,
+          "spacing": 1.0
+        },
+        "diff_pair_skew_defaults": {
+          "corner_radius_percentage": 80,
+          "corner_style": 1,
+          "max_amplitude": 1.0,
+          "min_amplitude": 0.2,
+          "single_sided": false,
+          "spacing": 0.6
+        },
+        "single_track_defaults": {
+          "corner_radius_percentage": 80,
+          "corner_style": 1,
+          "max_amplitude": 1.0,
+          "min_amplitude": 0.2,
+          "single_sided": false,
+          "spacing": 0.6
+        }
+      },
+      "via_dimensions": [
+        {
+          "diameter": 0.0,
+          "drill": 0.0
+        },
+        {
+          "diameter": 1.0,
+          "drill": 0.6
+        },
+        {
+          "diameter": 1.5,
+          "drill": 0.8
+        }
+      ],
+      "zones_allow_external_fillets": false
+    },
+    "ipc2581": {
+      "dist": "",
+      "distpn": "",
+      "internal_id": "",
+      "mfg": "",
+      "mpn": ""
+    },
+    "layer_presets": [],
+    "viewports": []
+  },
+  "boards": [],
+  "cvpcb": {
+    "equivalence_files": []
+  },
+  "erc": {
+    "erc_exclusions": [],
+    "meta": {
+      "version": 0
+    },
+    "pin_map": [
+      [
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        1,
+        0,
+        0,
+        0,
+        0,
+        2
+      ],
+      [
+        0,
+        2,
+        0,
+        1,
+        0,
+        0,
+        1,
+        0,
+        2,
+        2,
+        2,
+        2
+      ],
+      [
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        1,
+        0,
+        1,
+        0,
+        1,
+        2
+      ],
+      [
+        0,
+        1,
+        0,
+        0,
+        0,
+        0,
+        1,
+        1,
+        2,
+        1,
+        1,
+        2
+      ],
+      [
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        1,
+        0,
+        0,
+        0,
+        0,
+        2
+      ],
+      [
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        2
+      ],
+      [
+        1,
+        1,
+        1,
+        1,
+        1,
+        0,
+        1,
+        1,
+        1,
+        1,
+        1,
+        2
+      ],
+      [
+        0,
+        0,
+        0,
+        1,
+        0,
+        0,
+        1,
+        0,
+        0,
+        0,
+        0,
+        2
+      ],
+      [
+        0,
+        2,
+        1,
+        2,
+        0,
+        0,
+        1,
+        0,
+        2,
+        2,
+        2,
+        2
+      ],
+      [
+        0,
+        2,
+        0,
+        1,
+        0,
+        0,
+        1,
+        0,
+        2,
+        0,
+        0,
+        2
+      ],
+      [
+        0,
+        2,
+        1,
+        1,
+        0,
+        0,
+        1,
+        0,
+        2,
+        0,
+        0,
+        2
+      ],
+      [
+        2,
+        2,
+        2,
+        2,
+        2,
+        2,
+        2,
+        2,
+        2,
+        2,
+        2,
+        2
+      ]
+    ],
+    "rule_severities": {
+      "bus_definition_conflict": "error",
+      "bus_entry_needed": "error",
+      "bus_label_syntax": "error",
+      "bus_to_bus_conflict": "error",
+      "bus_to_net_conflict": "error",
+      "conflicting_netclasses": "error",
+      "different_unit_footprint": "error",
+      "different_unit_net": "error",
+      "duplicate_reference": "error",
+      "duplicate_sheet_names": "error",
+      "endpoint_off_grid": "warning",
+      "extra_units": "error",
+      "footprint_link_issues": "warning",
+      "global_label_dangling": "warning",
+      "hier_label_mismatch": "error",
+      "label_dangling": "error",
+      "lib_symbol_issues": "warning",
+      "lib_symbol_mismatch": "warning",
+      "missing_bidi_pin": "warning",
+      "missing_input_pin": "warning",
+      "missing_power_pin": "error",
+      "missing_unit": "warning",
+      "multiple_net_names": "warning",
+      "net_not_bus_member": "warning",
+      "no_connect_connected": "warning",
+      "no_connect_dangling": "warning",
+      "pin_not_connected": "error",
+      "pin_not_driven": "error",
+      "pin_to_pin": "warning",
+      "power_pin_not_driven": "error",
+      "similar_labels": "warning",
+      "simulation_model_issue": "ignore",
+      "unannotated": "error",
+      "unit_value_mismatch": "error",
+      "unresolved_variable": "error",
+      "wire_dangling": "error"
+    }
+  },
+  "libraries": {
+    "pinned_footprint_libs": [],
+    "pinned_symbol_libs": []
+  },
+  "meta": {
+    "filename": "stm32.kicad_pro",
+    "version": 1
+  },
+  "net_settings": {
+    "classes": [
+      {
+        "bus_width": 12,
+        "clearance": 0.2,
+        "diff_pair_gap": 0.25,
+        "diff_pair_via_gap": 0.25,
+        "diff_pair_width": 0.2,
+        "line_style": 0,
+        "microvia_diameter": 0.3,
+        "microvia_drill": 0.1,
+        "name": "Default",
+        "pcb_color": "rgba(0, 0, 0, 0.000)",
+        "schematic_color": "rgba(0, 0, 0, 0.000)",
+        "track_width": 0.2,
+        "via_diameter": 1.0,
+        "via_drill": 0.6,
+        "wire_width": 6
+      },
+      {
+        "bus_width": 12,
+        "clearance": 0.3,
+        "diff_pair_gap": 0.25,
+        "diff_pair_via_gap": 0.25,
+        "diff_pair_width": 0.2,
+        "line_style": 0,
+        "microvia_diameter": 0.3,
+        "microvia_drill": 0.1,
+        "name": "0.5",
+        "pcb_color": "rgba(0, 0, 0, 0.000)",
+        "schematic_color": "rgba(0, 0, 0, 0.000)",
+        "track_width": 0.5,
+        "via_diameter": 1.0,
+        "via_drill": 0.6,
+        "wire_width": 6
+      },
+      {
+        "bus_width": 12,
+        "clearance": 0.5,
+        "diff_pair_gap": 0.25,
+        "diff_pair_via_gap": 0.25,
+        "diff_pair_width": 0.2,
+        "line_style": 0,
+        "microvia_diameter": 0.3,
+        "microvia_drill": 0.1,
+        "name": "1",
+        "pcb_color": "rgba(0, 0, 0, 0.000)",
+        "schematic_color": "rgba(0, 0, 0, 0.000)",
+        "track_width": 1.0,
+        "via_diameter": 1.5,
+        "via_drill": 0.8,
+        "wire_width": 6
+      }
+    ],
+    "meta": {
+      "version": 3
+    },
+    "net_colors": null,
+    "netclass_assignments": null,
+    "netclass_patterns": [
+      {
+        "netclass": "Default",
+        "pattern": "+3V3"
+      },
+      {
+        "netclass": "Default",
+        "pattern": "+5V"
+      },
+      {
+        "netclass": "Default",
+        "pattern": "/5Vin"
+      },
+      {
+        "netclass": "Default",
+        "pattern": "/5Vusb"
+      },
+      {
+        "netclass": "Default",
+        "pattern": "/AIN0"
+      },
+      {
+        "netclass": "Default",
+        "pattern": "/AIN1"
+      },
+      {
+        "netclass": "Default",
+        "pattern": "/BOOT0"
+      },
+      {
+        "netclass": "Default",
+        "pattern": "/CAN_Rx"
+      },
+      {
+        "netclass": "Default",
+        "pattern": "/CAN_Tx"
+      },
+      {
+        "netclass": "Default",
+        "pattern": "/DIR"
+      },
+      {
+        "netclass": "Default",
+        "pattern": "/ESW0"
+      },
+      {
+        "netclass": "Default",
+        "pattern": "/ESW1"
+      },
+      {
+        "netclass": "Default",
+        "pattern": "/ESW2"
+      },
+      {
+        "netclass": "Default",
+        "pattern": "/ESW3"
+      },
+      {
+        "netclass": "Default",
+        "pattern": "/MISO"
+      },
+      {
+        "netclass": "Default",
+        "pattern": "/MOSI"
+      },
+      {
+        "netclass": "Default",
+        "pattern": "/NRST"
+      },
+      {
+        "netclass": "Default",
+        "pattern": "/Rx"
+      },
+      {
+        "netclass": "Default",
+        "pattern": "/SCK"
+      },
+      {
+        "netclass": "Default",
+        "pattern": "/STEP"
+      },
+      {
+        "netclass": "Default",
+        "pattern": "/SWCLK"
+      },
+      {
+        "netclass": "Default",
+        "pattern": "/SWDIO"
+      },
+      {
+        "netclass": "Default",
+        "pattern": "/Tx"
+      },
+      {
+        "netclass": "Default",
+        "pattern": "/Tx|Rx"
+      },
+      {
+        "netclass": "Default",
+        "pattern": "/VIO_on"
+      },
+      {
+        "netclass": "Default",
+        "pattern": "/brdaddr0"
+      },
+      {
+        "netclass": "Default",
+        "pattern": "/brdaddr1"
+      },
+      {
+        "netclass": "Default",
+        "pattern": "/brdaddr2"
+      },
+      {
+        "netclass": "Default",
+        "pattern": "/brdaddr3"
+      },
+      {
+        "netclass": "Default",
+        "pattern": "/~{CS}"
+      },
+      {
+        "netclass": "Default",
+        "pattern": "/~{EN}"
+      },
+      {
+        "netclass": "Default",
+        "pattern": "/~{FAULT}"
+      },
+      {
+        "netclass": "Default",
+        "pattern": "/~{SLEEP}"
+      },
+      {
+        "netclass": "Default",
+        "pattern": "GND"
+      },
+      {
+        "netclass": "Default",
+        "pattern": "Net-(D4-Pad1)"
+      },
+      {
+        "netclass": "Default",
+        "pattern": "Net-(D4-Pad2)"
+      },
+      {
+        "netclass": "Default",
+        "pattern": "Net-(D5-Pad2)"
+      },
+      {
+        "netclass": "Default",
+        "pattern": "Net-(D6-Pad2)"
+      },
+      {
+        "netclass": "Default",
+        "pattern": "Net-(D6-Pad3)"
+      },
+      {
+        "netclass": "Default",
+        "pattern": "Net-(D6-Pad6)"
+      },
+      {
+        "netclass": "Default",
+        "pattern": "Net-(D6-Pad7)"
+      },
+      {
+        "netclass": "Default",
+        "pattern": "Net-(F1-Pad1)"
+      },
+      {
+        "netclass": "Default",
+        "pattern": "Net-(F1-Pad2)"
+      },
+      {
+        "netclass": "Default",
+        "pattern": "Net-(J1-Pad1)"
+      },
+      {
+        "netclass": "Default",
+        "pattern": "Net-(J1-Pad2)"
+      },
+      {
+        "netclass": "Default",
+        "pattern": "Net-(J12-Pad1)"
+      },
+      {
+        "netclass": "Default",
+        "pattern": "Net-(J12-Pad2)"
+      },
+      {
+        "netclass": "Default",
+        "pattern": "Net-(J13-Pad6)"
+      },
+      {
+        "netclass": "Default",
+        "pattern": "Net-(J2-Pad1)"
+      },
+      {
+        "netclass": "Default",
+        "pattern": "Net-(J2-Pad2)"
+      },
+      {
+        "netclass": "Default",
+        "pattern": "Net-(J5-Pad1)"
+      },
+      {
+        "netclass": "Default",
+        "pattern": "Net-(J7-Pad1)"
+      },
+      {
+        "netclass": "Default",
+        "pattern": "Net-(J7-Pad2)"
+      },
+      {
+        "netclass": "Default",
+        "pattern": "Net-(J8-Pad1)"
+      },
+      {
+        "netclass": "Default",
+        "pattern": "Net-(J8-Pad2)"
+      },
+      {
+        "netclass": "Default",
+        "pattern": "Net-(Q1-Pad1)"
+      },
+      {
+        "netclass": "Default",
+        "pattern": "Net-(R11-Pad2)"
+      },
+      {
+        "netclass": "Default",
+        "pattern": "Net-(R12-Pad2)"
+      },
+      {
+        "netclass": "Default",
+        "pattern": "Net-(R4-Pad1)"
+      },
+      {
+        "netclass": "Default",
+        "pattern": "Net-(R9-Pad1)"
+      },
+      {
+        "netclass": "0.5",
+        "pattern": "/12Vin"
+      }
+    ]
+  },
+  "pcbnew": {
+    "last_paths": {
+      "gencad": "",
+      "idf": "",
+      "netlist": "stm32.net",
+      "plot": "",
+      "pos_files": "",
+      "specctra_dsn": "",
+      "step": "",
+      "svg": "",
+      "vrml": ""
+    },
+    "page_layout_descr_file": ""
+  },
+  "schematic": {
+    "annotate_start_num": 0,
+    "bom_fmt_presets": [],
+    "bom_fmt_settings": {
+      "field_delimiter": ",",
+      "keep_line_breaks": false,
+      "keep_tabs": false,
+      "name": "CSV",
+      "ref_delimiter": ",",
+      "ref_range_delimiter": "",
+      "string_delimiter": "\""
+    },
+    "bom_presets": [],
+    "bom_settings": {
+      "exclude_dnp": false,
+      "fields_ordered": [
+        {
+          "group_by": false,
+          "label": "Reference",
+          "name": "Reference",
+          "show": true
+        },
+        {
+          "group_by": true,
+          "label": "Value",
+          "name": "Value",
+          "show": true
+        },
+        {
+          "group_by": false,
+          "label": "Datasheet",
+          "name": "Datasheet",
+          "show": true
+        },
+        {
+          "group_by": false,
+          "label": "Footprint",
+          "name": "Footprint",
+          "show": true
+        },
+        {
+          "group_by": false,
+          "label": "Qty",
+          "name": "${QUANTITY}",
+          "show": true
+        },
+        {
+          "group_by": true,
+          "label": "DNP",
+          "name": "${DNP}",
+          "show": true
+        }
+      ],
+      "filter_string": "",
+      "group_symbols": true,
+      "name": "Grouped By Value",
+      "sort_asc": true,
+      "sort_field": "Reference"
+    },
+    "connection_grid_size": 50.0,
+    "drawing": {
+      "dashed_lines_dash_length_ratio": 12.0,
+      "dashed_lines_gap_length_ratio": 3.0,
+      "default_line_thickness": 6.0,
+      "default_text_size": 50.0,
+      "field_names": [],
+      "intersheets_ref_own_page": false,
+      "intersheets_ref_prefix": "",
+      "intersheets_ref_short": false,
+      "intersheets_ref_show": false,
+      "intersheets_ref_suffix": "",
+      "junction_size_choice": 3,
+      "label_size_ratio": 0.25,
+      "operating_point_overlay_i_precision": 3,
+      "operating_point_overlay_i_range": "~A",
+      "operating_point_overlay_v_precision": 3,
+      "operating_point_overlay_v_range": "~V",
+      "overbar_offset_ratio": 1.23,
+      "pin_symbol_size": 0.0,
+      "text_offset_ratio": 0.08
+    },
+    "legacy_lib_dir": "",
+    "legacy_lib_list": [],
+    "meta": {
+      "version": 1
+    },
+    "net_format_name": "Pcbnew",
+    "ngspice": {
+      "fix_include_paths": true,
+      "fix_passive_vals": false,
+      "meta": {
+        "version": 0
+      },
+      "model_mode": 0,
+      "workbook_filename": ""
+    },
+    "page_layout_descr_file": "",
+    "plot_directory": "",
+    "spice_adjust_passive_values": false,
+    "spice_current_sheet_as_root": false,
+    "spice_external_command": "spice \"%I\"",
+    "spice_model_current_sheet_as_root": true,
+    "spice_save_all_currents": false,
+    "spice_save_all_dissipations": false,
+    "spice_save_all_voltages": false,
+    "subpart_first_id": 49,
+    "subpart_id_separator": 46
+  },
+  "sheets": [
+    [
+      "99e5cbe8-ca46-48a4-a6fc-cabce62e3612",
+      "Корневой лист"
+    ]
+  ],
+  "text_variables": {}
+}

F0:F030,F042,F072/deprecated/CANbus_stepper/kicad/stm32.pro

@@ -0,0 +1,276 @@
+update=Пн 03 фев 2020 17:18:45
+version=1
+last_client=kicad
+[cvpcb]
+version=1
+NetIExt=net
+[general]
+version=1
+[eeschema]
+version=1
+LibDir=
+[schematic_editor]
+version=1
+PageLayoutDescrFile=
+PlotDirectoryName=
+SubpartIdSeparator=46
+SubpartFirstId=49
+NetFmtName=Pcbnew
+SpiceAjustPassiveValues=0
+LabSize=50
+ERC_TestSimilarLabels=1
+[pcbnew]
+version=1
+PageLayoutDescrFile=
+LastNetListRead=stm32.net
+CopperLayerCount=2
+BoardThickness=2.5
+AllowMicroVias=0
+AllowBlindVias=0
+RequireCourtyardDefinitions=0
+ProhibitOverlappingCourtyards=1
+MinTrackWidth=0.2
+MinViaDiameter=0.7999999999999999
+MinViaDrill=0.5
+MinMicroViaDiameter=0.2
+MinMicroViaDrill=0.09999999999999999
+MinHoleToHole=0.25
+TrackWidth1=0.2
+TrackWidth2=0.2
+TrackWidth3=0.3
+TrackWidth4=0.5
+TrackWidth5=1
+TrackWidth6=2
+ViaDiameter1=1
+ViaDrill1=0.6
+ViaDiameter2=1
+ViaDrill2=0.6
+ViaDiameter3=1.5
+ViaDrill3=0.8
+dPairWidth1=0.2
+dPairGap1=0.25
+dPairViaGap1=0.25
+SilkLineWidth=0.15
+SilkTextSizeV=1
+SilkTextSizeH=1
+SilkTextSizeThickness=0.15
+SilkTextItalic=0
+SilkTextUpright=1
+CopperLineWidth=0.2
+CopperTextSizeV=1.5
+CopperTextSizeH=1.5
+CopperTextThickness=0.3
+CopperTextItalic=0
+CopperTextUpright=1
+EdgeCutLineWidth=0.15
+CourtyardLineWidth=0.05
+OthersLineWidth=0.15
+OthersTextSizeV=1
+OthersTextSizeH=1
+OthersTextSizeThickness=0.15
+OthersTextItalic=0
+OthersTextUpright=1
+SolderMaskClearance=0.2
+SolderMaskMinWidth=0
+SolderPasteClearance=0
+SolderPasteRatio=-0
+[pcbnew/Layer.F.Cu]
+Name=F.Cu
+Type=0
+Enabled=1
+[pcbnew/Layer.In1.Cu]
+Name=In1.Cu
+Type=0
+Enabled=0
+[pcbnew/Layer.In2.Cu]
+Name=In2.Cu
+Type=0
+Enabled=0
+[pcbnew/Layer.In3.Cu]
+Name=In3.Cu
+Type=0
+Enabled=0
+[pcbnew/Layer.In4.Cu]
+Name=In4.Cu
+Type=0
+Enabled=0
+[pcbnew/Layer.In5.Cu]
+Name=In5.Cu
+Type=0
+Enabled=0
+[pcbnew/Layer.In6.Cu]
+Name=In6.Cu
+Type=0
+Enabled=0
+[pcbnew/Layer.In7.Cu]
+Name=In7.Cu
+Type=0
+Enabled=0
+[pcbnew/Layer.In8.Cu]
+Name=In8.Cu
+Type=0
+Enabled=0
+[pcbnew/Layer.In9.Cu]
+Name=In9.Cu
+Type=0
+Enabled=0
+[pcbnew/Layer.In10.Cu]
+Name=In10.Cu
+Type=0
+Enabled=0
+[pcbnew/Layer.In11.Cu]
+Name=In11.Cu
+Type=0
+Enabled=0
+[pcbnew/Layer.In12.Cu]
+Name=In12.Cu
+Type=0
+Enabled=0
+[pcbnew/Layer.In13.Cu]
+Name=In13.Cu
+Type=0
+Enabled=0
+[pcbnew/Layer.In14.Cu]
+Name=In14.Cu
+Type=0
+Enabled=0
+[pcbnew/Layer.In15.Cu]
+Name=In15.Cu
+Type=0
+Enabled=0
+[pcbnew/Layer.In16.Cu]
+Name=In16.Cu
+Type=0
+Enabled=0
+[pcbnew/Layer.In17.Cu]
+Name=In17.Cu
+Type=0
+Enabled=0
+[pcbnew/Layer.In18.Cu]
+Name=In18.Cu
+Type=0
+Enabled=0
+[pcbnew/Layer.In19.Cu]
+Name=In19.Cu
+Type=0
+Enabled=0
+[pcbnew/Layer.In20.Cu]
+Name=In20.Cu
+Type=0
+Enabled=0
+[pcbnew/Layer.In21.Cu]
+Name=In21.Cu
+Type=0
+Enabled=0
+[pcbnew/Layer.In22.Cu]
+Name=In22.Cu
+Type=0
+Enabled=0
+[pcbnew/Layer.In23.Cu]
+Name=In23.Cu
+Type=0
+Enabled=0
+[pcbnew/Layer.In24.Cu]
+Name=In24.Cu
+Type=0
+Enabled=0
+[pcbnew/Layer.In25.Cu]
+Name=In25.Cu
+Type=0
+Enabled=0
+[pcbnew/Layer.In26.Cu]
+Name=In26.Cu
+Type=0
+Enabled=0
+[pcbnew/Layer.In27.Cu]
+Name=In27.Cu
+Type=0
+Enabled=0
+[pcbnew/Layer.In28.Cu]
+Name=In28.Cu
+Type=0
+Enabled=0
+[pcbnew/Layer.In29.Cu]
+Name=In29.Cu
+Type=0
+Enabled=0
+[pcbnew/Layer.In30.Cu]
+Name=In30.Cu
+Type=0
+Enabled=0
+[pcbnew/Layer.B.Cu]
+Name=B.Cu
+Type=0
+Enabled=1
+[pcbnew/Layer.B.Adhes]
+Enabled=1
+[pcbnew/Layer.F.Adhes]
+Enabled=1
+[pcbnew/Layer.B.Paste]
+Enabled=1
+[pcbnew/Layer.F.Paste]
+Enabled=1
+[pcbnew/Layer.B.SilkS]
+Enabled=1
+[pcbnew/Layer.F.SilkS]
+Enabled=1
+[pcbnew/Layer.B.Mask]
+Enabled=1
+[pcbnew/Layer.F.Mask]
+Enabled=1
+[pcbnew/Layer.Dwgs.User]
+Enabled=1
+[pcbnew/Layer.Cmts.User]
+Enabled=1
+[pcbnew/Layer.Eco1.User]
+Enabled=1
+[pcbnew/Layer.Eco2.User]
+Enabled=1
+[pcbnew/Layer.Edge.Cuts]
+Enabled=1
+[pcbnew/Layer.Margin]
+Enabled=1
+[pcbnew/Layer.B.CrtYd]
+Enabled=1
+[pcbnew/Layer.F.CrtYd]
+Enabled=1
+[pcbnew/Layer.B.Fab]
+Enabled=1
+[pcbnew/Layer.F.Fab]
+Enabled=1
+[pcbnew/Layer.Rescue]
+Enabled=0
+[pcbnew/Netclasses]
+[pcbnew/Netclasses/Default]
+Name=Default
+Clearance=0.2
+TrackWidth=0.2
+ViaDiameter=1
+ViaDrill=0.6
+uViaDiameter=0.3
+uViaDrill=0.1
+dPairWidth=0.2
+dPairGap=0.25
+dPairViaGap=0.25
+[pcbnew/Netclasses/1]
+Name=0.5
+Clearance=0.3
+TrackWidth=0.5
+ViaDiameter=1
+ViaDrill=0.6
+uViaDiameter=0.3
+uViaDrill=0.1
+dPairWidth=0.2
+dPairGap=0.25
+dPairViaGap=0.25
+[pcbnew/Netclasses/2]
+Name=1
+Clearance=0.5
+TrackWidth=1
+ViaDiameter=1.5
+ViaDrill=0.8
+uViaDiameter=0.3
+uViaDrill=0.1
+dPairWidth=0.2
+dPairGap=0.25
+dPairViaGap=0.25

F0:F030,F042,F072/deprecated/CANbus_stepper/kicad/sym-lib-table

@@ -0,0 +1,4 @@
+(sym_lib_table
+  (lib (name "elements")(type "Legacy")(uri "${KIPRJMOD}/elements.lib")(options "")(descr ""))
+  (lib (name "stm32-rescue")(type "Legacy")(uri "${KIPRJMOD}/stm32-rescue.lib")(options "")(descr ""))
+)