restructuring

deprecated/F1/DMA_GPIO/sync.c

@@ -0,0 +1,93 @@
+/*
+ * This file is part of the libopencm3 project.
+ *
+ * Copyright (C) 2012 Fergus Noble <fergusnoble@gmail.com>
+ *
+ * This library is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU Lesser General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public License
+ * along with this library.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+/*
+ * TODO:
+ *   implement mutexes for other type of MCU (which doesn't have strex & ldrex)
+ */
+
+#include <libopencm3/cm3/sync.h>
+
+/* DMB is supported on CM0 */
+void __dmb()
+{
+	__asm__ volatile ("dmb");
+}
+
+/* Those are defined only on CM3 or CM4 */
+#if defined(__ARM_ARCH_7M__) || defined(__ARM_ARCH_7EM__)
+
+uint32_t __ldrex(volatile uint32_t *addr)
+{
+	uint32_t res;
+	__asm__ volatile ("ldrex %0, [%1]" : "=r" (res) : "r" (addr));
+	return res;
+}
+
+uint32_t __strex(uint32_t val, volatile uint32_t *addr)
+{
+	uint32_t res;
+	__asm__ volatile ("strex %0, %2, [%1]"
+			  : "=&r" (res) : "r" (addr), "r" (val));
+	return res;
+}
+
+void mutex_lock(mutex_t *m)
+{
+	uint32_t status = 0;
+
+	do {
+		/* Wait until the mutex is unlocked. */
+		while (__ldrex(m) != MUTEX_UNLOCKED);
+
+		/* Try to acquire it. */
+		status = __strex(MUTEX_LOCKED, m);
+
+	/* Did we get it? If not then try again. */
+	} while (status != 0);
+
+	/* Execute the mysterious Data Memory Barrier instruction! */
+	__dmb();
+}
+
+void mutex_unlock(mutex_t *m)
+{
+	/* Ensure accesses to protected resource are finished */
+	__dmb();
+
+	/* Free the lock. */
+	*m = MUTEX_UNLOCKED;
+}
+
+/*
+ * Try to lock mutex
+ * if it's already locked or there was error in STREX, return MUTEX_LOCKED
+ * else return MUTEX_UNLOCKED
+ */
+mutex_t mutex_trylock(mutex_t *m){
+	uint32_t status = 0;
+	mutex_t old_lock = __ldrex(m); // get mutex value
+	// set mutex
+	status = __strex(MUTEX_LOCKED, m);
+	if(status == 0) __dmb();
+	else old_lock = MUTEX_LOCKED;
+	return old_lock;
+}
+
+#endif