eddy/stm32samples
1
0
Fork 0
mirror of https://github.com/eddyem/stm32samples.git synced 2025-12-06 10:45:11 +03:00
Code Issues Packages Projects Releases Wiki Activity

fix readme

Browse Source
This commit is contained in:
Edward Emelianov 2025-04-04 12:03:55 +03:00
parent f46185feaf
commit 6adf025f62
1 changed files with 6 additions and 6 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

12
F1:F103/BISS_C_encoders/Readme.md
View File

@ -5,7 +5,7 @@ This device works with two BISS-C encoders (resolution from 8 to 32 bit).
If you want to test readout from device, run `./testDev /dev/encoder_X0` or `./testDev /dev/encoder_X0`.
** Encoder cable pinout:
## Encoder cable pinout:
* 1 - NC or shield
* 2 - CLK_A - positive of SSI clock out
@ -18,7 +18,7 @@ If you want to test readout from device, run `./testDev /dev/encoder_X0` or `./t
* 9 - Gnd - common ground
** Device interfaces
## Device interfaces
After connection you will see device 0483:5740 with three CDC interfaces. Each interface
have its own `iInterface` field, by default they are:
@ -35,7 +35,7 @@ will repeat each `amperiod` milliseconds. Also you always can ask for readout se
data into encoder's interface or running commands `readenc`, `readX` or `readY` in command interface.
** Protocol
## Protocol
The device have simple text protocol, each text string should be closed by '\n'.
Base format is 'param [ = value]', where 'param' could be command to run some procedure
@ -51,7 +51,7 @@ Answer for all getters is 'param=value'. Here are answers for setters and proced
Some procedures (like 'help' or 'readenc') returns a lot of data after calling.
*** Base commands on command interface
### Base commands on command interface
These are commands for directrly work with SPI interfaces:
@ -65,7 +65,7 @@ These are commands for directrly work with SPI interfaces:
* spistat - get status of both SPI interfaces
*** Configuration commands
### Configuration commands
This set of commands allows to change current configuration (remember: each time SPI configuration changes
you need to run `spiinit`) and store it into flash memory.
@ -110,7 +110,7 @@ minzeros=4
Empty field of `setifaceX` means default interface name.
*** Debugging commands
### Debugging commands
Some of these commands could be usefull when you're trying to play with settings or want to measure maximal
readout speed for encoders (when each reading starts immediately after parsing previous result).