diff --git a/F0-nolib/USB_pl2303_snippet/usb.c b/F0-nolib/USB_pl2303_snippet/usb.c index b1f583d..d327323 100644 --- a/F0-nolib/USB_pl2303_snippet/usb.c +++ b/F0-nolib/USB_pl2303_snippet/usb.c @@ -63,7 +63,7 @@ void USB_setup(){ CRS->CR |= CRS_CR_AUTOTRIMEN; // enable auto trim CRS->CR |= CRS_CR_CEN; // enable freq counter & block CRS->CFGR as read-only RCC->CFGR |= RCC_CFGR_SW; - // allow RESET and CTRM interrupts + // allow RESET and WKUPM interrupts USB->CNTR = USB_CNTR_RESETM | USB_CNTR_WKUPM; // clear flags USB->ISTR = 0; diff --git a/F303-nolib/PL2303/Makefile b/F303-nolib/PL2303/Makefile new file mode 100644 index 0000000..f725d8c --- /dev/null +++ b/F303-nolib/PL2303/Makefile @@ -0,0 +1,146 @@ +BINARY = pl2303 +BOOTPORT ?= /dev/ttyUSB0 +BOOTSPEED ?= 115200 +# MCU FAMILY +FAMILY ?= F3 +# MCU code +MCU ?= F303xb +# or __ARM_ARCH_7EM__ +ARMARCH = __ARM_ARCH_7M__ +# change this linking script depending on particular MCU model, +LDSCRIPT ?= stm32f303xB.ld +# debug +#DEFS = -DEBUG + +INDEPENDENT_HEADERS= + +FP_FLAGS ?= -mfpu=fpv4-sp-d16 -mfloat-abi=softfp -fsingle-precision-constant -mlittle-endian -DARM_MATH_CM4 +ASM_FLAGS ?= -mthumb -mcpu=cortex-m4 +ARCH_FLAGS = $(ASM_FLAGS) $(FP_FLAGS) -D $(ARMARCH) + +############################################################################### +# Executables +# PREFIX ?= arm-none-eabi +# gcc from arm web site +PREFIX ?= /opt/bin/arm-none-eabi +#TOOLCHLIB ?= /opt/arm-none-eabi/lib +RM := rm -f +RMDIR := rmdir +CC := $(PREFIX)-gcc +# don't replace ld with gcc: the binary size would be much greater!! +LD := $(PREFIX)-ld +AR := $(PREFIX)-ar +AS := $(PREFIX)-as +SIZE := $(PREFIX)-size +OBJCOPY := $(PREFIX)-objcopy +OBJDUMP := $(PREFIX)-objdump +GDB := $(PREFIX)-gdb +STFLASH := $(shell which st-flash) +STBOOT := $(shell which stm32flash) +DFUUTIL := $(shell which dfu-util) + +############################################################################### +# Source files +OBJDIR := mk +SRC := $(wildcard *.c) +OBJS := $(addprefix $(OBJDIR)/, $(SRC:%.c=%.o)) +STARTUP := $(OBJDIR)/startup.o +MAP := $(OBJDIR)/$(BINARY).map +OBJS += $(STARTUP) +# dependencies: we need them to recompile files if their headers-dependencies changed +DEPS := $(OBJS:.o=.d) + +INC_DIR ?= ../inc + +INCLUDE := -I$(INC_DIR)/Fx -I$(INC_DIR)/cm +LIB_DIR := $(INC_DIR)/ld + +############################################################################### +# C flags +CFLAGS += -g -gdwarf-2 # debuggin symbols in listing +CFLAGS += -O2 -D__thumb2__=1 -MD +CFLAGS += -Wall -Werror -Wextra -Wshadow +CFLAGS += -fshort-enums -ffunction-sections -fdata-sections +#CFLAGS += -fno-common -ffunction-sections -fdata-sections -fno-stack-protector +CFLAGS += $(ARCH_FLAGS) + +############################################################################### +# Linker flags +#LDFLAGS += -nostartfiles --static -nostdlib -specs=nosys.specs -specs=nano.specs +LDFLAGS += $(ARCH_FLAGS) +LDFLAGS += -specs=nano.specs -specs=nosys.specs +LDFLAGS += -L$(LIB_DIR) +#-L$(TOOLCHLIB) +LDFLAGS += -T$(LDSCRIPT) +LDFLAGS += -Wl,-Map=$(MAP),--cref -Wl,--gc-sections -Wl,--print-memory-usage + +############################################################################### +# Used libraries +#LDLIBS += -lc $(shell $(CC) $(CFLAGS) -print-libgcc-file-name) + +DEFS += -DSTM32$(FAMILY) -DSTM32$(MCU) + +ELF := $(OBJDIR)/$(BINARY).elf +LIST := $(OBJDIR)/$(BINARY).list +BIN := $(BINARY).bin +HEX := $(BINARY).hex + +all: bin list size + +elf: $(ELF) +bin: $(BIN) +hex: $(HEX) +list: $(LIST) + +ifneq ($(MAKECMDGOALS),clean) +-include $(DEPS) +endif + +$(OBJDIR): + mkdir $(OBJDIR) + +$(STARTUP): $(INC_DIR)/startup/vector.c + $(CC) $(CFLAGS) $(DEFS) $(INCLUDE) -o $@ -c $< + +$(OBJDIR)/%.o: %.c + @echo " CC $<" + $(CC) $(CFLAGS) $(DEFS) $(INCLUDE) -o $@ -c $< + +$(BIN): $(ELF) + @echo " OBJCOPY $(BIN)" + $(OBJCOPY) -Obinary $(ELF) $(BIN) + +$(HEX): $(ELF) + @echo " OBJCOPY $(HEX)" + $(OBJCOPY) -Oihex $(ELF) $(HEX) + +$(LIST): $(ELF) + @echo " OBJDUMP $(LIST)" + $(OBJDUMP) -S $(ELF) > $(LIST) + +$(ELF): $(OBJDIR) $(OBJS) + @echo " LD $(ELF)" + $(CC) $(LDFLAGS) $(OBJS) $(LDLIBS) -o $(ELF) + +size: $(ELF) + $(SIZE) $(ELF) + +clean: + @echo " CLEAN" + $(RM) $(OBJS) $(DEPS) $(ELF) $(HEX) $(LIST) $(MAP) + @rmdir $(OBJDIR) 2>/dev/null || true + + +flash: $(BIN) + @echo " FLASH $(BIN)" + $(STFLASH) write $(BIN) 0x8000000 + +boot: $(BIN) + @echo " LOAD $(BIN) through bootloader" + $(STBOOT) -b$(BOOTSPEED) $(BOOTPORT) -w $(BIN) + +dfuboot: $(BIN) + @echo " LOAD $(BIN) THROUGH DFU" + $(DFUUTIL) -a0 -D $(BIN) -s 0x08000000 + +.PHONY: clean flash boot diff --git a/F303-nolib/PL2303/hardware.c b/F303-nolib/PL2303/hardware.c new file mode 100644 index 0000000..c6a169a --- /dev/null +++ b/F303-nolib/PL2303/hardware.c @@ -0,0 +1,32 @@ +/* + * This file is part of the pl2303 project. + * Copyright 2022 Edward V. Emelianov . + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include "hardware.h" +#include "usart.h" + +static inline void gpio_setup(){ + RCC->AHBENR |= RCC_AHBENR_GPIOAEN | RCC_AHBENR_GPIOBEN; // for USART and LEDs + for(int i = 0; i < 10000; ++i) nop(); + GPIOB->MODER = GPIO_MODER_MODER0_O | GPIO_MODER_MODER1_O; + GPIOB->ODR = 1; +} + +void hw_setup(){ + gpio_setup(); +} + diff --git a/F303-nolib/PL2303/hardware.h b/F303-nolib/PL2303/hardware.h new file mode 100644 index 0000000..d1888a7 --- /dev/null +++ b/F303-nolib/PL2303/hardware.h @@ -0,0 +1,27 @@ +/* + * This file is part of the pl2303 project. + * Copyright 2022 Edward V. Emelianov . + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once +#ifndef __HARDWARE_H__ +#define __HARDWARE_H__ + +#include + +void hw_setup(); + +#endif // __HARDWARE_H__ diff --git a/F303-nolib/PL2303/main.c b/F303-nolib/PL2303/main.c new file mode 100644 index 0000000..b2e5b01 --- /dev/null +++ b/F303-nolib/PL2303/main.c @@ -0,0 +1,93 @@ +/* + * This file is part of the pl2303 project. + * Copyright 2022 Edward V. Emelianov . + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include "hardware.h" +#include "proto.h" +#include "usart.h" +#include "usb.h" + +#define USBBUFSZ 127 + +volatile uint32_t Tms = 0; + +void sys_tick_handler(void){ + ++Tms; +} + +// usb getline +char *get_USB(){ + static char tmpbuf[USBBUFSZ+1], *curptr = tmpbuf; + static int rest = USBBUFSZ; + uint8_t x = USB_receive(curptr); + if(!x) return NULL; + curptr[x] = 0; + if(curptr[x-1] == '\n'){ + curptr = tmpbuf; + rest = USBBUFSZ; + return tmpbuf; + } + curptr += x; rest -= x; + if(rest <= 0){ // buffer overflow + curptr = tmpbuf; + rest = USBBUFSZ; + USB_send("USB buffer overflow\n"); + } + return NULL; +} + +int main(void){ + int hse = 0; + if(StartHSE()){ + hse = 1; + SysTick_Config((uint32_t)72000); // 1ms + }else{ + StartHSI(); + SysTick_Config((uint32_t)48000); // 1ms + } + hw_setup(); + usart_setup(); + USB_setup(); + if(hse) usart_send("Ready @ HSE"); + else usart_send("Ready @ HSI"); + usart_send(", CFGR="); usart_send(u2hexstr(RCC->CFGR)); + usart_send(", CR="); usart_send(u2hexstr(RCC->CR)); + usart_send(", SysFreq="); usart_send(u2str(SysFreq)); usart_putchar('\n'); + uint32_t ctr = Tms; + while(1){ + if(Tms - ctr > 499){ + ctr = Tms; + pin_toggle(GPIOB, 1 << 1 | 1 << 0); // toggle LED @ PB0 + } + if(bufovr){ + bufovr = 0; + usart_send("bufovr\n"); + } + char *txt = NULL; + if(usart_getline(&txt)){ + const char *ans = parse_cmd(txt); + if(ans) usart_send(ans); + } + usb_proc(); + if((txt = get_USB())){ + usart_send("Get by USB: "); + usart_send(txt); usart_putchar('\n'); + const char *ans = parse_cmd(txt); + if(ans) USB_send(ans); + } + } +} diff --git a/F303-nolib/PL2303/pl2303.bin b/F303-nolib/PL2303/pl2303.bin new file mode 100755 index 0000000..eec87c5 Binary files /dev/null and b/F303-nolib/PL2303/pl2303.bin differ diff --git a/F303-nolib/PL2303/proto.c b/F303-nolib/PL2303/proto.c new file mode 100644 index 0000000..2f9fb2f --- /dev/null +++ b/F303-nolib/PL2303/proto.c @@ -0,0 +1,262 @@ +/* + * This file is part of the pl2303 project. + * Copyright 2022 Edward V. Emelianov . + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include "proto.h" +#include "usart.h" +#include "usb.h" +char *omit_spaces(const char *buf){ + while(*buf){ + if(*buf > ' ') break; + ++buf; + } + return (char*)buf; +} + +// In case of overflow return `buf` and N==0xffffffff +// read decimal number & return pointer to next non-number symbol +static char *getdec(const char *buf, uint32_t *N){ + char *start = (char*)buf; + uint32_t num = 0; + while(*buf){ + char c = *buf; + if(c < '0' || c > '9'){ + break; + } + if(num > 429496729 || (num == 429496729 && c > '5')){ // overflow + *N = 0xffffff; + return start; + } + num *= 10; + num += c - '0'; + ++buf; + } + *N = num; + return (char*)buf; +} +// read hexadecimal number (without 0x prefix!) +static char *gethex(const char *buf, uint32_t *N){ + char *start = (char*)buf; + uint32_t num = 0; + while(*buf){ + char c = *buf; + uint8_t M = 0; + if(c >= '0' && c <= '9'){ + M = '0'; + }else if(c >= 'A' && c <= 'F'){ + M = 'A' - 10; + }else if(c >= 'a' && c <= 'f'){ + M = 'a' - 10; + } + if(M){ + if(num & 0xf0000000){ // overflow + *N = 0xffffff; + return start; + } + num <<= 4; + num += c - M; + }else{ + break; + } + ++buf; + } + *N = num; + return (char*)buf; +} +// read octal number (without 0 prefix!) +static char *getoct(const char *buf, uint32_t *N){ + char *start = (char*)buf; + uint32_t num = 0; + while(*buf){ + char c = *buf; + if(c < '0' || c > '7'){ + break; + } + if(num & 0xe0000000){ // overflow + *N = 0xffffff; + return start; + } + num <<= 3; + num += c - '0'; + ++buf; + } + *N = num; + return (char*)buf; +} +// read binary number (without b prefix!) +static char *getbin(const char *buf, uint32_t *N){ + char *start = (char*)buf; + uint32_t num = 0; + while(*buf){ + char c = *buf; + if(c < '0' || c > '1'){ + break; + } + if(num & 0x80000000){ // overflow + *N = 0xffffff; + return start; + } + num <<= 1; + if(c == '1') num |= 1; + ++buf; + } + *N = num; + return (char*)buf; +} + +/** + * @brief getnum - read uint32_t from string (dec, hex or bin: 127, 0x7f, 0b1111111) + * @param buf - buffer with number and so on + * @param N - the number read + * @return pointer to first non-number symbol in buf + * (if it is == buf, there's no number or if *N==0xffffffff there was overflow) + */ +char *getnum(const char *txt, uint32_t *N){ + char *nxt = NULL; + char *s = omit_spaces(txt); + if(*s == '0'){ // hex, oct or 0 + if(s[1] == 'x' || s[1] == 'X'){ // hex + nxt = gethex(s+2, N); + if(nxt == s+2) nxt = (char*)txt; + }else if(s[1] > '0'-1 && s[1] < '8'){ // oct + nxt = getoct(s+1, N); + if(nxt == s+1) nxt = (char*)txt; + }else{ // 0 + nxt = s+1; + *N = 0; + } + }else if(*s == 'b' || *s == 'B'){ + nxt = getbin(s+1, N); + if(nxt == s+1) nxt = (char*)txt; + }else{ + nxt = getdec(s, N); + if(nxt == s) nxt = (char*)txt; + } + return nxt; +} + +const char* helpmsg = + "'i' - print USB->ISTR state\n" + "'p' - toggle USB pullup\n" + "'N' - read number (dec, 0xhex, 0oct, bbin) and show it in decimal\n" + "'R' - software reset\n" + "'W' - test watchdog\n" +; + +static char stbuf[256], *bptr = NULL; +static int blen = 0; +static void initbuf(){bptr = stbuf; blen = 255; *bptr = 0;} +static void add2buf(const char *s){ + while(blen && *s){ + *bptr++ = *s++; + --blen; + } + *bptr = 0; +} + +const char *parse_cmd(const char *buf){ + initbuf(); + if(buf[1] == '\n' || !buf[1]){ // one symbol commands + switch(*buf){ + case 'i': + add2buf("USB->ISTR="); + add2buf(u2hexstr(USB->ISTR)); + add2buf(", USB->CNTR="); + add2buf(u2hexstr(USB->CNTR)); + add2buf("\n"); + break; + case 'p': + pin_toggle(USBPU_port, USBPU_pin); + add2buf("USB pullup is "); + if(pin_read(USBPU_port, USBPU_pin)) add2buf("off\n"); + else add2buf("on\n"); + break; + case 'R': + USB_send("Soft reset\n"); + usart_send("Soft reset\n"); + NVIC_SystemReset(); + break; + case 'W': + USB_send("Wait for reboot\n"); + usart_send("Wait for reboot\n"); + while(1){nop();}; + break; + default: + return helpmsg; + } + return stbuf; + } + uint32_t Num = 0; + char *nxt; + switch(*buf){ // long messages + case 'N': + ++buf; + nxt = getnum(buf, &Num); + if(buf == nxt){ + if(Num == 0) return "Wrong number\n"; + return "Integer32 overflow\n"; + } + add2buf("You give: "); + add2buf(u2str(Num)); + if(*nxt && *nxt != '\n'){ + add2buf(", the rest of string: "); + add2buf(nxt); + }else add2buf("\n"); + break; + default: + return buf; + } + return stbuf; +} + + +// return string with number `val` +char *u2str(uint32_t val){ + static char strbuf[11]; + char *bufptr = &strbuf[10]; + *bufptr = 0; + if(!val){ + *(--bufptr) = '0'; + }else{ + while(val){ + *(--bufptr) = val % 10 + '0'; + val /= 10; + } + } + return bufptr; +} + +char *u2hexstr(uint32_t val){ + static char strbuf[11] = "0x"; + char *sptr = strbuf + 2; + uint8_t *ptr = (uint8_t*)&val + 3; + int8_t i, j, z=1; + for(i = 0; i < 4; ++i, --ptr){ + if(*ptr == 0){ // omit leading zeros + if(i == 3) z = 0; + if(z) continue; + } + else z = 0; + for(j = 1; j > -1; --j){ + uint8_t half = (*ptr >> (4*j)) & 0x0f; + if(half < 10) *sptr++ = half + '0'; + else *sptr++ = half - 10 + 'a'; + } + } + *sptr = 0; + return strbuf; +} diff --git a/F303-nolib/PL2303/proto.h b/F303-nolib/PL2303/proto.h new file mode 100644 index 0000000..bd7c53d --- /dev/null +++ b/F303-nolib/PL2303/proto.h @@ -0,0 +1,31 @@ +/* + * This file is part of the pl2303 project. + * Copyright 2022 Edward V. Emelianov . + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once +#ifndef PROTO_H__ +#define PROTO_H__ + +#include + +const char *parse_cmd(const char *buf); +char *omit_spaces(const char *buf); +char *getnum(const char *buf, uint32_t *N); +char *u2str(uint32_t val); +char *u2hexstr(uint32_t val); + +#endif // PROTO_H__ diff --git a/F303-nolib/PL2303/usart.c b/F303-nolib/PL2303/usart.c new file mode 100644 index 0000000..7c03606 --- /dev/null +++ b/F303-nolib/PL2303/usart.c @@ -0,0 +1,106 @@ +/* + * This file is part of the pl2303 project. + * Copyright 2022 Edward V. Emelianov . + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include "stm32f3.h" +#include "hardware.h" +#include "usart.h" +#include + +static volatile int idatalen = 0; // received data line length (including '\n') + +volatile int linerdy = 0, // received data ready + dlen = 0, // length of data (including '\n') in current buffer + bufovr = 0; // input buffer overfull + +static volatile int rbufno = 0; // current rbuf number +static char rbuf[2][UARTBUFSZ]; // receive buffers +static volatile char *recvdata = NULL; + +/** + * return length of received data (without trailing zero) + */ +int usart_getline(char **line){ + if(bufovr){ + bufovr = 0; + linerdy = 0; + return 0; + } + if(!linerdy) return 0; + *line = (char*)recvdata; + linerdy = 0; + return dlen; +} + +void usart_putchar(const char ch){ + while(!(USART1->ISR & USART_ISR_TXE)); + USART1->TDR = ch; +} +void usart_sendn(const char *str, int L){ + if(!str) return; + for(int i = 0; i < L; ++i){ + usart_putchar(str[i]); + } +} +void usart_send(const char *str){ + if(!str) return; + int L = 0; + const char *ptr = str; + while(*ptr++) ++L; + usart_sendn(str, L); +} + +void usart_setup(){ + // USART1: Rx - PA10 (AF7), Tx - PA9 (AF7) + // setup pins: + GPIOA->MODER = (GPIOA->MODER & ~(GPIO_MODER_MODER9 | GPIO_MODER_MODER10)) | + GPIO_MODER_MODER9_AF | GPIO_MODER_MODER10_AF; + GPIOA->AFR[1] = (GPIOA->AFR[1] & ~(GPIO_AFRH_AFRH1 | GPIO_AFRH_AFRH2)) | + 7 << (1 * 4) | 7 << (2 * 4); // PA9, PA10 + // clock + RCC->APB2ENR |= RCC_APB2ENR_USART1EN; + USART1->ICR = 0xffffffff; // clear all flags + USART1->BRR = SysFreq / 115200; + USART1->CR1 = USART_CR1_TE | USART_CR1_RE | USART_CR1_UE | USART_CR1_RXNEIE; // 1start,8data,nstop; enable Rx,Tx,USART + uint32_t tmout = 16000000; + while(!(USART1->ISR & USART_ISR_TC)){if(--tmout == 0) break;} // polling idle frame Transmission + USART1->ICR = 0xffffffff; // clear all flags again + NVIC_SetPriority(USART1_IRQn, 0); + NVIC_EnableIRQ(USART1_IRQn); +} + +void usart1_exti25_isr(){ + if(USART1->ISR & USART_ISR_RXNE){ // RX not emty - receive next char + // read RDR clears flag + uint8_t rb = USART1->RDR; + if(idatalen < UARTBUFSZ){ // put next char into buf + rbuf[rbufno][idatalen++] = rb; + if(rb == '\n'){ // got newline - line ready + linerdy = 1; + dlen = idatalen; + recvdata = rbuf[rbufno]; + recvdata[dlen-1] = 0; + // prepare other buffer + rbufno = !rbufno; + idatalen = 0; + } + }else{ // buffer overrun + bufovr = 1; + idatalen = 0; + } + } +} diff --git a/F303-nolib/PL2303/usart.h b/F303-nolib/PL2303/usart.h new file mode 100644 index 0000000..74a34ea --- /dev/null +++ b/F303-nolib/PL2303/usart.h @@ -0,0 +1,36 @@ +/* + * This file is part of the pl2303 project. + * Copyright 2022 Edward V. Emelianov . + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once +#ifndef __USART_H__ +#define __USART_H__ + +#include "hardware.h" + +// input buffers size +#define UARTBUFSZ (80) + +extern volatile int linerdy, bufovr; + +void usart_setup(); +int usart_getline(char **line); +void usart_send(const char *str); +void usart_sendn(const char *str, int L); +void usart_putchar(const char ch); + +#endif // __USART_H__ diff --git a/F303-nolib/PL2303/usb.c b/F303-nolib/PL2303/usb.c new file mode 100644 index 0000000..28ce4e0 --- /dev/null +++ b/F303-nolib/PL2303/usb.c @@ -0,0 +1,152 @@ +/* + * This file is part of the pl2303 project. + * Copyright 2022 Edward V. Emelianov . + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include "usb.h" +#include "usb_lib.h" + +static volatile uint8_t tx_succesfull = 1; +static volatile uint8_t rxNE = 0; + +static int sstrlen(const char *s){ + if(!s) return 0; + int l = 0; + while(*s++) ++l; + return l; +} + +// interrupt IN handler (never used?) +static void EP1_Handler(){ + uint16_t epstatus = KEEP_DTOG(USB->EPnR[1]); + if(RX_FLAG(epstatus)) epstatus = (epstatus & ~USB_EPnR_STAT_TX) ^ USB_EPnR_STAT_RX; // set valid RX + else epstatus = epstatus & ~(USB_EPnR_STAT_TX|USB_EPnR_STAT_RX); + // clear CTR + epstatus = (epstatus & ~(USB_EPnR_CTR_RX|USB_EPnR_CTR_TX)); + USB->EPnR[1] = epstatus; +} + +// data IN/OUT handlers +static void transmit_Handler(){ // EP3IN + tx_succesfull = 1; + uint16_t epstatus = KEEP_DTOG_STAT(USB->EPnR[3]); + // clear CTR keep DTOGs & STATs + USB->EPnR[3] = (epstatus & ~(USB_EPnR_CTR_TX)); // clear TX ctr +} + +static void receive_Handler(){ // EP2OUT + rxNE = 1; + uint16_t epstatus = KEEP_DTOG_STAT(USB->EPnR[2]); + USB->EPnR[2] = (epstatus & ~(USB_EPnR_CTR_RX)); // clear RX ctr +} + +static int usbwr(const char *buf, int l){ + uint32_t ctra = 1000000; + while(--ctra && tx_succesfull == 0){ + IWDG->KR = IWDG_REFRESH; + } + tx_succesfull = 0; + EP_Write(3, (uint8_t*)buf, l); + ctra = 1000000; + while(--ctra && tx_succesfull == 0){ + IWDG->KR = IWDG_REFRESH; + } + if(tx_succesfull == 0){usbON = 0; return 1;} // usb is OFF? + return 0; +} + +static char usbbuff[USB_TXBUFSZ-1]; // temporary buffer (63 - to prevent need of ZLP) +static int buflen = 0; // amount of symbols in usbbuff + +// send next up to 63 bytes of data in usbbuff +static void send_next(){ + if(!buflen || !tx_succesfull) return; + tx_succesfull = 0; + EP_Write(3, (uint8_t*)usbbuff, buflen); + buflen = 0; +} + +// blocking sending +static void USB_send_blk(const char *buf, int len){ + if(!usbON || !len) return; // USB disconnected + if(buflen){ + usbwr(usbbuff, buflen); + buflen = 0; + } + int needzlp = 0; + while(len){ + if(len == USB_TXBUFSZ) needzlp = 1; + int s = (len > USB_TXBUFSZ) ? USB_TXBUFSZ : len; + if(usbwr(buf, s)) return; + len -= s; + buf += s; + } + if(needzlp){ + usbwr(NULL, 0); + } +} + +// unblocking sending - just fill a buffer +void USB_send(const char *buf){ + int len = sstrlen(buf); + if(!usbON || !len) return; + if(len > USB_TXBUFSZ-1 - buflen){ + usbwr(usbbuff, buflen); + buflen = 0; + } + if(len > USB_TXBUFSZ-1){ + USB_send_blk(buf, len); + return; + } + while(len--) usbbuff[buflen++] = *buf++; +} + +void usb_proc(){ + switch(USB_Dev.USB_Status){ + case USB_STATE_CONFIGURED: + // make new BULK endpoint + // Buffer have 1024 bytes, but last 256 we use for CAN bus (30.2 of RM: USB main features) + EP_Init(1, EP_TYPE_INTERRUPT, USB_EP1BUFSZ, 0, EP1_Handler); // IN1 - transmit + EP_Init(2, EP_TYPE_BULK, 0, USB_RXBUFSZ, receive_Handler); // OUT2 - receive data + EP_Init(3, EP_TYPE_BULK, USB_TXBUFSZ, 0, transmit_Handler); // IN3 - transmit data + USB_Dev.USB_Status = USB_STATE_CONNECTED; + break; + case USB_STATE_DEFAULT: + case USB_STATE_ADDRESSED: + if(usbON){ + usbON = 0; + } + break; + default: // USB_STATE_CONNECTED - send next data portion + if(!usbON) return; + send_next(); + } +} + +/** + * @brief USB_receive + * @param buf (i) - buffer[64] for received data + * @return amount of received bytes + */ +int USB_receive(char *buf){ + if(!usbON || !rxNE) return 0; + int sz = EP_Read(2, (uint16_t*)buf); + uint16_t epstatus = KEEP_DTOG(USB->EPnR[2]); + // keep stat_tx & set ACK rx + USB->EPnR[2] = (epstatus & ~(USB_EPnR_STAT_TX)) ^ USB_EPnR_STAT_RX; + rxNE = 0; + return sz; +} diff --git a/F303-nolib/PL2303/usb.h b/F303-nolib/PL2303/usb.h new file mode 100644 index 0000000..721b45c --- /dev/null +++ b/F303-nolib/PL2303/usb.h @@ -0,0 +1,31 @@ +/* + * This file is part of the pl2303 project. + * Copyright 2022 Edward V. Emelianov . + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once +#ifndef __USB_H__ +#define __USB_H__ + +#include "usbhw.h" + +#define BUFFSIZE (64) + +void usb_proc(); +void USB_send(const char *buf); +int USB_receive(char *buf); + +#endif // __USB_H__ diff --git a/F303-nolib/PL2303/usb_lib.c b/F303-nolib/PL2303/usb_lib.c new file mode 100644 index 0000000..ad49ea4 --- /dev/null +++ b/F303-nolib/PL2303/usb_lib.c @@ -0,0 +1,388 @@ +/* + * This file is part of the pl2303 project. + * Copyright 2022 Edward V. Emelianov . + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include +#include "usb_lib.h" + +ep_t endpoints[STM32ENDPOINTS]; + +usb_dev_t USB_Dev; +static usb_LineCoding lineCoding = {115200, 0, 0, 8}; +config_pack_t setup_packet; +uint8_t ep0databuf[EP0DATABUF_SIZE]; +uint8_t ep0dbuflen = 0; + +usb_LineCoding getLineCoding(){return lineCoding;} + +uint8_t usbON = 0; // device disconnected from terminal + +// definition of parts common for USB_DeviceDescriptor & USB_DeviceQualifierDescriptor +#define bcdUSB_L 0x10 +#define bcdUSB_H 0x01 +#define bDeviceClass 0 +#define bDeviceSubClass 0 +#define bDeviceProtocol 0 +#define bNumConfigurations 1 + +static const uint8_t USB_DeviceDescriptor[] = { + 18, // bLength + 0x01, // bDescriptorType - Device descriptor + bcdUSB_L, // bcdUSB_L - 1.10 + bcdUSB_H, // bcdUSB_H + bDeviceClass, // bDeviceClass - USB_COMM + bDeviceSubClass, // bDeviceSubClass + bDeviceProtocol, // bDeviceProtocol + USB_EP0_BUFSZ, // bMaxPacketSize + 0x7b, // idVendor_L PL2303: VID=0x067b, PID=0x2303 + 0x06, // idVendor_H + 0x03, // idProduct_L + 0x23, // idProduct_H + 0x00, // bcdDevice_Ver_L + 0x03, // bcdDevice_Ver_H + 0x01, // iManufacturer + 0x02, // iProduct + 0x00, // iSerialNumber + bNumConfigurations // bNumConfigurations +}; + +static const uint8_t USB_DeviceQualifierDescriptor[] = { + 10, //bLength + 0x06, // bDescriptorType - Device qualifier + bcdUSB_L, // bcdUSB_L + bcdUSB_H, // bcdUSB_H + bDeviceClass, // bDeviceClass + bDeviceSubClass, // bDeviceSubClass + bDeviceProtocol, // bDeviceProtocol + USB_EP0_BUFSZ, // bMaxPacketSize0 + bNumConfigurations, // bNumConfigurations + 0x00 // Reserved +}; + +static const uint8_t USB_ConfigDescriptor[] = { + /*Configuration Descriptor*/ + 0x09, /* bLength: Configuration Descriptor size */ + 0x02, /* bDescriptorType: Configuration */ + 39, /* wTotalLength:no of returned bytes */ + 0x00, + 0x01, /* bNumInterfaces: 1 interface */ + 0x01, /* bConfigurationValue: Configuration value */ + 0x00, /* iConfiguration: Index of string descriptor describing the configuration */ + 0xa0, /* bmAttributes - Bus powered, Remote wakeup */ + 0x32, /* MaxPower 100 mA */ + + /*---------------------------------------------------------------------------*/ + + /*Interface Descriptor */ + 0x09, /* bLength: Interface Descriptor size */ + 0x04, /* bDescriptorType: Interface */ + 0x00, /* bInterfaceNumber: Number of Interface */ + 0x00, /* bAlternateSetting: Alternate setting */ + 0x03, /* bNumEndpoints: 3 endpoints used */ + 0xff, /* bInterfaceClass */ + 0x00, /* bInterfaceSubClass */ + 0x00, /* bInterfaceProtocol */ + 0x00, /* iInterface: */ +/////////////////////////////////////////////////// + /*Endpoint 1 Descriptor*/ + 0x07, /* bLength: Endpoint Descriptor size */ + 0x05, /* bDescriptorType: Endpoint */ + 0x81, /* bEndpointAddress IN1 */ + 0x03, /* bmAttributes: Interrupt */ + 0x0a, /* wMaxPacketSize LO: */ + 0x00, /* wMaxPacketSize HI: */ + 0x01, /* bInterval: */ + + /*Endpoint OUT2 Descriptor*/ + 0x07, /* bLength: Endpoint Descriptor size */ + 0x05, /* bDescriptorType: Endpoint */ + 0x02, /* bEndpointAddress: OUT2 */ + 0x02, /* bmAttributes: Bulk */ + (USB_RXBUFSZ & 0xff), /* wMaxPacketSize: 64 */ + (USB_RXBUFSZ >> 8), + 0x00, /* bInterval: ignore for Bulk transfer */ + + /*Endpoint IN3 Descriptor*/ + 0x07, /* bLength: Endpoint Descriptor size */ + 0x05, /* bDescriptorType: Endpoint */ + 0x83, /* bEndpointAddress IN3 */ + 0x02, /* bmAttributes: Bulk */ + (USB_TXBUFSZ & 0xff), /* wMaxPacketSize: 64 */ + (USB_TXBUFSZ >> 8), + 0x00, /* bInterval: ignore for Bulk transfer */ +}; + +_USB_LANG_ID_(USB_StringLangDescriptor, LANG_US); +// these descriptors are not used in PL2303 emulator! +_USB_STRING_(USB_StringSerialDescriptor, u"0"); +_USB_STRING_(USB_StringManufacturingDescriptor, u"Prolific Technology Inc."); +_USB_STRING_(USB_StringProdDescriptor, u"USB-Serial Controller"); + +/* + * default handlers + */ +// SET_LINE_CODING +void WEAK linecoding_handler(usb_LineCoding __attribute__((unused)) *lc){ +} + +// SET_CONTROL_LINE_STATE +void WEAK clstate_handler(uint16_t __attribute__((unused)) val){ +} + +// SEND_BREAK +void WEAK break_handler(){ +} + +// handler of vendor requests +void WEAK vendor_handler(config_pack_t *packet){ + if(packet->bmRequestType & 0x80){ // read + uint8_t c; + switch(packet->wValue){ + case 0x8484: + c = 2; + break; + case 0x0080: + c = 1; + break; + case 0x8686: + c = 0xaa; + break; + default: + c = 0; + } + EP_WriteIRQ(0, &c, 1); + }else{ // write ZLP + EP_WriteIRQ(0, (uint8_t *)0, 0); + } +} + +static void wr0(const uint8_t *buf, uint16_t size){ + if(setup_packet.wLength < size) size = setup_packet.wLength; // shortened request + if(size < endpoints[0].txbufsz){ + EP_WriteIRQ(0, buf, size); + return; + } + while(size){ + uint16_t l = size; + if(l > endpoints[0].txbufsz) l = endpoints[0].txbufsz; + EP_WriteIRQ(0, buf, l); + buf += l; + size -= l; + uint8_t needzlp = (l == endpoints[0].txbufsz) ? 1 : 0; + if(size || needzlp){ // send last data buffer + uint16_t status = KEEP_DTOG(USB->EPnR[0]); + // keep DTOGs, clear CTR_RX,TX, set TX VALID, leave stat_Rx + USB->EPnR[0] = (status & ~(USB_EPnR_CTR_RX|USB_EPnR_CTR_TX|USB_EPnR_STAT_RX)) + ^ USB_EPnR_STAT_TX; + uint32_t ctr = 1000000; + while(--ctr && (USB->ISTR & USB_ISTR_CTR) == 0){IWDG->KR = IWDG_REFRESH;}; + if((USB->ISTR & USB_ISTR_CTR) == 0){ + return; + } + if(needzlp) EP_WriteIRQ(0, (uint8_t*)0, 0); + } + } +} + +static inline void get_descriptor(){ + switch(setup_packet.wValue){ + case DEVICE_DESCRIPTOR: + wr0(USB_DeviceDescriptor, sizeof(USB_DeviceDescriptor)); + break; + case CONFIGURATION_DESCRIPTOR: + wr0(USB_ConfigDescriptor, sizeof(USB_ConfigDescriptor)); + break; + case STRING_LANG_DESCRIPTOR: + wr0((const uint8_t *)&USB_StringLangDescriptor, STRING_LANG_DESCRIPTOR_SIZE_BYTE); + break; + case STRING_MAN_DESCRIPTOR: + wr0((const uint8_t *)&USB_StringManufacturingDescriptor, USB_StringManufacturingDescriptor.bLength); + break; + case STRING_PROD_DESCRIPTOR: + wr0((const uint8_t *)&USB_StringProdDescriptor, USB_StringProdDescriptor.bLength); + break; + case STRING_SN_DESCRIPTOR: + wr0((const uint8_t *)&USB_StringSerialDescriptor, USB_StringSerialDescriptor.bLength); + break; + case DEVICE_QUALIFIER_DESCRIPTOR: + wr0(USB_DeviceQualifierDescriptor, USB_DeviceQualifierDescriptor[0]); + break; + default: + break; + } +} + +static uint8_t configuration = 0; // reply for GET_CONFIGURATION (==1 if configured) +static inline void std_d2h_req(){ + uint16_t status = 0; // bus powered + switch(setup_packet.bRequest){ + case GET_DESCRIPTOR: + get_descriptor(); + break; + case GET_STATUS: + EP_WriteIRQ(0, (uint8_t *)&status, 2); // send status: Bus Powered + break; + case GET_CONFIGURATION: + EP_WriteIRQ(0, &configuration, 1); + break; + default: + break; + } +} + +static inline void std_h2d_req(){ + switch(setup_packet.bRequest){ + case SET_ADDRESS: + // new address will be assigned later - after acknowlegement or request to host + USB_Dev.USB_Addr = setup_packet.wValue; + break; + case SET_CONFIGURATION: + // Now device configured + USB_Dev.USB_Status = USB_STATE_CONFIGURED; + configuration = setup_packet.wValue; + break; + default: + break; + } +} + +/* +bmRequestType: 76543210 +7 direction: 0 - host->device, 1 - device->host +65 type: 0 - standard, 1 - class, 2 - vendor +4..0 getter: 0 - device, 1 - interface, 2 - endpoint, 3 - other +*/ +/** + * Endpoint0 (control) handler + */ +void EP0_Handler(){ + uint16_t epstatus = USB->EPnR[0]; // EP0R on input -> return this value after modifications + uint8_t reqtype = setup_packet.bmRequestType & 0x7f; + uint8_t dev2host = (setup_packet.bmRequestType & 0x80) ? 1 : 0; + int rxflag = RX_FLAG(epstatus); + if(rxflag && SETUP_FLAG(epstatus)){ + switch(reqtype){ + case STANDARD_DEVICE_REQUEST_TYPE: // standard device request + if(dev2host){ + std_d2h_req(); + }else{ + std_h2d_req(); + EP_WriteIRQ(0, (uint8_t *)0, 0); + } + break; + case STANDARD_ENDPOINT_REQUEST_TYPE: // standard endpoint request + if(setup_packet.bRequest == CLEAR_FEATURE){ + EP_WriteIRQ(0, (uint8_t *)0, 0); + } + break; + case VENDOR_REQUEST_TYPE: + vendor_handler(&setup_packet); + break; + case CONTROL_REQUEST_TYPE: + switch(setup_packet.bRequest){ + case GET_LINE_CODING: + EP_WriteIRQ(0, (uint8_t*)&lineCoding, sizeof(lineCoding)); + break; + case SET_LINE_CODING: // omit this for next stage, when data will come + break; + case SET_CONTROL_LINE_STATE: + usbON = 1; + clstate_handler(setup_packet.wValue); + break; + case SEND_BREAK: + usbON = 0; + break_handler(); + break; + default: + break; + } + if(setup_packet.bRequest != GET_LINE_CODING) EP_WriteIRQ(0, (uint8_t *)0, 0); // write acknowledgement + break; + default: + EP_WriteIRQ(0, (uint8_t *)0, 0); + } + }else if(rxflag){ // got data over EP0 or host acknowlegement + if(endpoints[0].rx_cnt){ + if(setup_packet.bRequest == SET_LINE_CODING){ + linecoding_handler((usb_LineCoding*)ep0databuf); + } + } + } else if(TX_FLAG(epstatus)){ // package transmitted + // now we can change address after enumeration + if ((USB->DADDR & USB_DADDR_ADD) != USB_Dev.USB_Addr){ + USB->DADDR = USB_DADDR_EF | USB_Dev.USB_Addr; + // change state to ADRESSED + USB_Dev.USB_Status = USB_STATE_ADDRESSED; + } + } + epstatus = KEEP_DTOG(USB->EPnR[0]); + if(rxflag) epstatus ^= USB_EPnR_STAT_TX; // start ZLP/data transmission + else epstatus &= ~USB_EPnR_STAT_TX; // or leave unchanged + // keep DTOGs, clear CTR_RX,TX, set RX VALID + USB->EPnR[0] = (epstatus & ~(USB_EPnR_CTR_RX|USB_EPnR_CTR_TX)) ^ USB_EPnR_STAT_RX; +} + +/** + * Write data to EP buffer (called from IRQ handler) + * @param number - EP number + * @param *buf - array with data + * @param size - its size + */ +void EP_WriteIRQ(uint8_t number, const uint8_t *buf, uint16_t size){ + uint8_t i; + if(size > endpoints[number].txbufsz) size = endpoints[number].txbufsz; + uint16_t N2 = (size + 1) >> 1; + // the buffer is 16-bit, so we should copy data as it would be uint16_t + uint16_t *buf16 = (uint16_t *)buf; + uint32_t *out = (uint32_t *)endpoints[number].tx_buf; + for(i = 0; i < N2; ++i, ++out){ + *out = buf16[i]; + } + USB_BTABLE->EP[number].USB_COUNT_TX = size; +} + +/** + * Write data to EP buffer (called outside IRQ handler) + * @param number - EP number + * @param *buf - array with data + * @param size - its size + */ +void EP_Write(uint8_t number, const uint8_t *buf, uint16_t size){ + EP_WriteIRQ(number, buf, size); + uint16_t status = KEEP_DTOG(USB->EPnR[number]); + // keep DTOGs, clear CTR_TX & set TX VALID to start transmission + USB->EPnR[number] = (status & ~(USB_EPnR_CTR_TX)) ^ USB_EPnR_STAT_TX; +} + +/* + * Copy data from EP buffer into user buffer area + * @param *buf - user array for data + * @return amount of data read + */ +int EP_Read(uint8_t number, uint16_t *buf){ + int sz = endpoints[number].rx_cnt; + if(!sz) return 0; + endpoints[number].rx_cnt = 0; + int n = (sz + 1) >> 1; + uint32_t *in = (uint32_t *)endpoints[number].rx_buf; + if(n){ + for(int i = 0; i < n; ++i, ++in) + buf[i] = *(uint16_t*)in; + } + return sz; +} + diff --git a/F303-nolib/PL2303/usb_lib.h b/F303-nolib/PL2303/usb_lib.h new file mode 100644 index 0000000..4b45040 --- /dev/null +++ b/F303-nolib/PL2303/usb_lib.h @@ -0,0 +1,186 @@ +/* + * This file is part of the pl2303 project. + * Copyright 2022 Edward V. Emelianov . + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once +#ifndef __USB_LIB_H__ +#define __USB_LIB_H__ + +#include +#include "usbhw.h" + +#define EP0DATABUF_SIZE (64) +#define LASTADDR_DEFAULT (STM32ENDPOINTS * 8) + +// bmRequestType & 0x7f +#define STANDARD_DEVICE_REQUEST_TYPE 0 +#define STANDARD_ENDPOINT_REQUEST_TYPE 2 +#define VENDOR_REQUEST_TYPE 0x40 +#define CONTROL_REQUEST_TYPE 0x21 +// bRequest, standard; for bmRequestType == 0x80 +#define GET_STATUS 0x00 +#define GET_DESCRIPTOR 0x06 +#define GET_CONFIGURATION 0x08 +// for bmRequestType == 0 +#define CLEAR_FEATURE 0x01 +#define SET_FEATURE 0x03 // unused +#define SET_ADDRESS 0x05 +#define SET_DESCRIPTOR 0x07 // unused +#define SET_CONFIGURATION 0x09 +// for bmRequestType == 0x81, 1 or 0xB2 +#define GET_INTERFACE 0x0A // unused +#define SET_INTERFACE 0x0B // unused +#define SYNC_FRAME 0x0C // unused +#define VENDOR_REQUEST 0x01 // unused + +// Class-Specific Control Requests +#define SEND_ENCAPSULATED_COMMAND 0x00 // unused +#define GET_ENCAPSULATED_RESPONSE 0x01 // unused +#define SET_COMM_FEATURE 0x02 // unused +#define GET_COMM_FEATURE 0x03 // unused +#define CLEAR_COMM_FEATURE 0x04 // unused +#define SET_LINE_CODING 0x20 +#define GET_LINE_CODING 0x21 +#define SET_CONTROL_LINE_STATE 0x22 +#define SEND_BREAK 0x23 + +// control line states +#define CONTROL_DTR 0x01 +#define CONTROL_RTS 0x02 + +// wValue +#define DEVICE_DESCRIPTOR 0x100 +#define CONFIGURATION_DESCRIPTOR 0x200 +#define STRING_LANG_DESCRIPTOR 0x300 +#define STRING_MAN_DESCRIPTOR 0x301 +#define STRING_PROD_DESCRIPTOR 0x302 +#define STRING_SN_DESCRIPTOR 0x303 +#define DEVICE_QUALIFIER_DESCRIPTOR 0x600 + +#define RX_FLAG(epstat) (epstat & USB_EPnR_CTR_RX) +#define TX_FLAG(epstat) (epstat & USB_EPnR_CTR_TX) +#define SETUP_FLAG(epstat) (epstat & USB_EPnR_SETUP) + +// EPnR bits manipulation +#define KEEP_DTOG_STAT(EPnR) (EPnR & ~(USB_EPnR_STAT_RX|USB_EPnR_STAT_TX|USB_EPnR_DTOG_RX|USB_EPnR_DTOG_TX)) +#define KEEP_DTOG(EPnR) (EPnR & ~(USB_EPnR_DTOG_RX|USB_EPnR_DTOG_TX)) + +// USB state: uninitialized, addressed, ready for use +typedef enum{ + USB_STATE_DEFAULT, + USB_STATE_ADDRESSED, + USB_STATE_CONFIGURED, + USB_STATE_CONNECTED +} USB_state; + +// EP types +#define EP_TYPE_BULK 0x00 +#define EP_TYPE_CONTROL 0x01 +#define EP_TYPE_ISO 0x02 +#define EP_TYPE_INTERRUPT 0x03 + +#define LANG_US (uint16_t)0x0409 + +#define _USB_STRING_(name, str) \ +static const struct name \ +{ \ + uint8_t bLength; \ + uint8_t bDescriptorType; \ + uint16_t bString[(sizeof(str) - 2) / 2]; \ + \ +} \ +name = {sizeof(name), 0x03, str} + +#define _USB_LANG_ID_(name, lng_id) \ + \ +static const struct name \ +{ \ + uint8_t bLength; \ + uint8_t bDescriptorType; \ + uint16_t bString; \ + \ +} \ +name = {0x04, 0x03, lng_id} +#define STRING_LANG_DESCRIPTOR_SIZE_BYTE (4) + +// EP0 configuration packet +typedef struct { + uint8_t bmRequestType; + uint8_t bRequest; + uint16_t wValue; + uint16_t wIndex; + uint16_t wLength; +} config_pack_t; + +// endpoints state +typedef struct{ + uint16_t *tx_buf; // transmission buffer address + uint16_t txbufsz; // transmission buffer size + uint16_t *rx_buf; // reception buffer address + void (*func)(); // endpoint action function + unsigned rx_cnt : 10; // received data counter +} ep_t; + +// USB status & its address +typedef struct { + uint8_t USB_Status; + uint16_t USB_Addr; +}usb_dev_t; + +typedef struct { + uint32_t dwDTERate; + uint8_t bCharFormat; + #define USB_CDC_1_STOP_BITS 0 + #define USB_CDC_1_5_STOP_BITS 1 + #define USB_CDC_2_STOP_BITS 2 + uint8_t bParityType; + #define USB_CDC_NO_PARITY 0 + #define USB_CDC_ODD_PARITY 1 + #define USB_CDC_EVEN_PARITY 2 + #define USB_CDC_MARK_PARITY 3 + #define USB_CDC_SPACE_PARITY 4 + uint8_t bDataBits; +} __attribute__ ((packed)) usb_LineCoding; + +typedef struct { + uint8_t bmRequestType; + uint8_t bNotificationType; + uint16_t wValue; + uint16_t wIndex; + uint16_t wLength; +} __attribute__ ((packed)) usb_cdc_notification; + +extern ep_t endpoints[]; +extern usb_dev_t USB_Dev; +extern uint8_t usbON; +extern config_pack_t setup_packet; +extern uint8_t ep0databuf[]; +extern uint8_t ep0dbuflen; + +void EP0_Handler(); + +void EP_WriteIRQ(uint8_t number, const uint8_t *buf, uint16_t size); +void EP_Write(uint8_t number, const uint8_t *buf, uint16_t size); +int EP_Read(uint8_t number, uint16_t *buf); +usb_LineCoding getLineCoding(); + +void linecoding_handler(usb_LineCoding *lc); +void clstate_handler(uint16_t val); +void break_handler(); +void vendor_handler(config_pack_t *packet); + +#endif // __USB_LIB_H__ diff --git a/F303-nolib/PL2303/usbhw.c b/F303-nolib/PL2303/usbhw.c new file mode 100644 index 0000000..e254e48 --- /dev/null +++ b/F303-nolib/PL2303/usbhw.c @@ -0,0 +1,134 @@ +/* + * This file is part of the pl2303 project. + * Copyright 2022 Edward V. Emelianov . + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include "usb.h" +#include "usb_lib.h" + +void USB_setup(){ + NVIC_DisableIRQ(USB_LP_IRQn); + // remap USB LP & Wakeup interrupts to 75 and 76 - works only on pure F303 + RCC->APB2ENR |= RCC_APB2ENR_SYSCFGEN; // enable tacting of SYSCFG + SYSCFG->CFGR1 |= SYSCFG_CFGR1_USB_IT_RMP; + // setup pullup + RCC->AHBENR |= RCC_AHBENR_GPIOAEN; + USBPU_OFF(); + GPIOA->MODER = (GPIOA->MODER & (~GPIO_MODER_MODER15_Msk | GPIO_MODER_MODER11_Msk | GPIO_MODER_MODER12_Msk)) | + GPIO_MODER_MODER11_AF | GPIO_MODER_MODER12_AF | GPIO_MODER_MODER15_O; + // USB - alternate function 14 @ pins PA11/PA12 + GPIOA->AFR[1] = (GPIOA->AFR[1] & ~(GPIO_AFRH_AFRH3_Msk | GPIO_AFRH_AFRH4_Msk)) | + (14 << (3 * 4)) | (14 << (4 * 4)); + RCC->APB1ENR |= RCC_APB1ENR_USBEN; + USB->CNTR = USB_CNTR_FRES; // Force USB Reset + for(uint32_t ctr = 0; ctr < 72000; ++ctr) nop(); // wait >1ms + //uint32_t ctr = 0; + USB->CNTR = 0; + USB->BTABLE = 0; + USB->DADDR = 0; + USB->ISTR = 0; + USB->CNTR = USB_CNTR_RESETM | USB_CNTR_WKUPM; // allow only wakeup & reset interrupts + NVIC_EnableIRQ(USB_LP_IRQn); + USBPU_ON(); +} + +static uint16_t lastaddr = LASTADDR_DEFAULT; +/** + * Endpoint initialisation + * @param number - EP num (0...7) + * @param type - EP type (EP_TYPE_BULK, EP_TYPE_CONTROL, EP_TYPE_ISO, EP_TYPE_INTERRUPT) + * @param txsz - transmission buffer size @ USB/CAN buffer + * @param rxsz - reception buffer size @ USB/CAN buffer + * @param uint16_t (*func)(ep_t *ep) - EP handler function + * @return 0 if all OK + */ +int EP_Init(uint8_t number, uint8_t type, uint16_t txsz, uint16_t rxsz, void (*func)(ep_t ep)){ + if(number >= STM32ENDPOINTS) return 4; // out of configured amount + if(txsz > USB_BTABLE_SIZE || rxsz > USB_BTABLE_SIZE) return 1; // buffer too large + if(lastaddr + txsz + rxsz >= USB_BTABLE_SIZE) return 2; // out of btable + USB->EPnR[number] = (type << 9) | (number & USB_EPnR_EA); + USB->EPnR[number] ^= USB_EPnR_STAT_RX | USB_EPnR_STAT_TX_1; + if(rxsz & 1 || rxsz > 512) return 3; // wrong rx buffer size + uint16_t countrx = 0; + if(rxsz < 64) countrx = rxsz / 2; + else{ + if(rxsz & 0x1f) return 3; // should be multiple of 32 + countrx = 31 + rxsz / 32; + } + USB_BTABLE->EP[number].USB_ADDR_TX = lastaddr; + endpoints[number].tx_buf = (uint16_t *)(USB_BTABLE_BASE + lastaddr*2); + endpoints[number].txbufsz = txsz; + lastaddr += txsz; + USB_BTABLE->EP[number].USB_COUNT_TX = 0; + USB_BTABLE->EP[number].USB_ADDR_RX = lastaddr; + endpoints[number].rx_buf = (uint16_t *)(USB_BTABLE_BASE + lastaddr*2); + lastaddr += rxsz; + USB_BTABLE->EP[number].USB_COUNT_RX = countrx << 10; + endpoints[number].func = func; + return 0; +} + +// standard IRQ handler +void usb_lp_isr(){ + if(USB->ISTR & USB_ISTR_RESET){ + usbON = 0; + // Reinit registers + USB->CNTR = USB_CNTR_RESETM | USB_CNTR_CTRM | USB_CNTR_SUSPM | USB_CNTR_WKUPM; + // Endpoint 0 - CONTROL + // ON USB LS size of EP0 may be 8 bytes, but on FS it should be 64 bytes! + lastaddr = LASTADDR_DEFAULT; + // clear address, leave only enable bit + USB->DADDR = USB_DADDR_EF; + USB_Dev.USB_Status = USB_STATE_DEFAULT; + if(EP_Init(0, EP_TYPE_CONTROL, USB_EP0_BUFSZ, USB_EP0_BUFSZ, EP0_Handler)){ + return; + } + USB->ISTR = ~USB_ISTR_RESET; + } + if(USB->ISTR & USB_ISTR_CTR){ + // EP number + uint8_t n = USB->ISTR & USB_ISTR_EPID; + // copy status register + uint16_t epstatus = USB->EPnR[n]; + // copy received bytes amount + endpoints[n].rx_cnt = USB_BTABLE->EP[n].USB_COUNT_RX & 0x3FF; // low 10 bits is counter + // check direction + if(USB->ISTR & USB_ISTR_DIR){ // OUT interrupt - receive data, CTR_RX==1 (if CTR_TX == 1 - two pending transactions: receive following by transmit) + if(n == 0){ // control endpoint + if(epstatus & USB_EPnR_SETUP){ // setup packet -> copy data to conf_pack + EP_Read(0, (uint16_t*)&setup_packet); + ep0dbuflen = 0; + // interrupt handler will be called later + }else if(epstatus & USB_EPnR_CTR_RX){ // data packet -> push received data to ep0databuf + ep0dbuflen = endpoints[0].rx_cnt; + EP_Read(0, (uint16_t*)&ep0databuf); + } + } + } + // call EP handler + if(endpoints[n].func) endpoints[n].func(endpoints[n]); + } + if(USB->ISTR & USB_ISTR_SUSP){ // suspend -> still no connection, may sleep + usbON = 0; + USB->CNTR |= USB_CNTR_FSUSP | USB_CNTR_LP_MODE; + USB->ISTR = ~USB_ISTR_SUSP; + } + if(USB->ISTR & USB_ISTR_WKUP){ // wakeup + USB->CNTR &= ~(USB_CNTR_FSUSP | USB_CNTR_LP_MODE); // clear suspend flags + USB->ISTR = ~USB_ISTR_WKUP; + } +} + diff --git a/F303-nolib/PL2303/usbhw.h b/F303-nolib/PL2303/usbhw.h new file mode 100644 index 0000000..6ba114e --- /dev/null +++ b/F303-nolib/PL2303/usbhw.h @@ -0,0 +1,107 @@ +/* + * This file is part of the pl2303 project. + * Copyright 2022 Edward V. Emelianov . + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once +#ifndef USBHW_H__ +#define USBHW_H__ + +#include + +#define USBPU_port GPIOA +#define USBPU_pin (1<<15) +#define USBPU_ON() pin_clear(USBPU_port, USBPU_pin) +#define USBPU_OFF() pin_set(USBPU_port, USBPU_pin) + +// max endpoints number +#define STM32ENDPOINTS 8 +/** + * Buffers size definition + **/ +#define USB_BTABLE_SIZE 512 +// first 64 bytes of USB_BTABLE are registers! +//#define USB_EP0_BASEADDR 64 +// for USB FS EP0 buffers are from 8 to 64 bytes long (64 for PL2303) +#define USB_EP0_BUFSZ 64 +// USB transmit buffer size (64 for PL2303) +#define USB_TXBUFSZ 64 +// USB receive buffer size (64 for PL2303) +#define USB_RXBUFSZ 64 +// EP1 - interrupt - buffer size +#define USB_EP1BUFSZ 8 + +#define USB_BTABLE_BASE 0x40006000 +#define USB ((USB_TypeDef *) USB_BASE) + +#ifdef USB_BTABLE +#undef USB_BTABLE +#endif +#define USB_BTABLE ((USB_BtableDef *)(USB_BTABLE_BASE)) +#define USB_ISTR_EPID 0x0000000F +#define USB_FNR_LSOF_0 0x00000800 +#define USB_FNR_lSOF_1 0x00001000 +#define USB_LPMCSR_BESL_0 0x00000010 +#define USB_LPMCSR_BESL_1 0x00000020 +#define USB_LPMCSR_BESL_2 0x00000040 +#define USB_LPMCSR_BESL_3 0x00000080 +#define USB_EPnR_CTR_RX 0x00008000 +#define USB_EPnR_DTOG_RX 0x00004000 +#define USB_EPnR_STAT_RX 0x00003000 +#define USB_EPnR_STAT_RX_0 0x00001000 +#define USB_EPnR_STAT_RX_1 0x00002000 +#define USB_EPnR_SETUP 0x00000800 +#define USB_EPnR_EP_TYPE 0x00000600 +#define USB_EPnR_EP_TYPE_0 0x00000200 +#define USB_EPnR_EP_TYPE_1 0x00000400 +#define USB_EPnR_EP_KIND 0x00000100 +#define USB_EPnR_CTR_TX 0x00000080 +#define USB_EPnR_DTOG_TX 0x00000040 +#define USB_EPnR_STAT_TX 0x00000030 +#define USB_EPnR_STAT_TX_0 0x00000010 +#define USB_EPnR_STAT_TX_1 0x00000020 +#define USB_EPnR_EA 0x0000000F +#define USB_COUNTn_RX_BLSIZE 0x00008000 +#define USB_COUNTn_NUM_BLOCK 0x00007C00 +#define USB_COUNTn_RX 0x0000003F + +#define USB_TypeDef USB_TypeDef_custom + +typedef struct { + __IO uint32_t EPnR[STM32ENDPOINTS]; + __IO uint32_t RESERVED[STM32ENDPOINTS]; + __IO uint32_t CNTR; + __IO uint32_t ISTR; + __IO uint32_t FNR; + __IO uint32_t DADDR; + __IO uint32_t BTABLE; +} USB_TypeDef; + +typedef struct{ + __IO uint32_t USB_ADDR_TX; + __IO uint32_t USB_COUNT_TX; + __IO uint32_t USB_ADDR_RX; + __IO uint32_t USB_COUNT_RX; +} USB_EPDATA_TypeDef; + +typedef struct{ + __IO USB_EPDATA_TypeDef EP[STM32ENDPOINTS]; +} USB_BtableDef; + +void USB_setup(); +int EP_Init(uint8_t number, uint8_t type, uint16_t txsz, uint16_t rxsz, void (*func)()); + +#endif // USBHW_H__ diff --git a/F303-nolib/Readme.md b/F303-nolib/Readme.md index 4d6b0f6..4c6e71f 100644 --- a/F303-nolib/Readme.md +++ b/F303-nolib/Readme.md @@ -8,3 +8,4 @@ Most of these samples works with [my non-solder devboard](https://github.com/edd - **usarts** - work with all three USARTs with Tx DMA, send to USART1 data read from other, you can send "2\n" or "3\n" to USART1 for tests of USART2/USART3 - **floatPrintf** - work with floats, convert floating point number into a string - **usart1fullDMA** - USART1 Rx and Tx DMA access (Rx terminated by character match of '\n' or buffer overflow). +- **PL2303** - emulates PL2303