eddy/IR-controller
1
0
Fork 0
mirror of https://github.com/eddyem/IR-controller.git synced 2025-12-06 10:45:15 +03:00
Code Issues Packages Projects Releases Wiki Activity
IR-controller/usb_lib/otgd_fs_dev.c
Eddy a2bb8e56d3 copy
2014-03-19 00:22:14 +04:00

385 lines
13 KiB
C
Raw Blame History

/**
******************************************************************************
* @file otgd_fs_dev.c
* @author MCD Application Team
* @version V3.4.0
* @date 29-June-2012
* @brief High Layer device mode interface and wrapping layer.
******************************************************************************
* @attention
*
* <h2><center>&copy; COPYRIGHT 2012 STMicroelectronics</center></h2>
*
* Licensed under MCD-ST Liberty SW License Agreement V2, (the "License");
* You may not use this file except in compliance with the License.
* You may obtain a copy of the License at:
*
* http://www.st.com/software_license_agreement_liberty_v2
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*
******************************************************************************
*/
#ifdef STM32F10X_CL
/* Includes ------------------------------------------------------------------*/
#include "otgd_fs_dev.h"
#include "usb_regs.h"
#include "otgd_fs_cal.h"
#include "otgd_fs_pcd.h"
/* Private typedef -----------------------------------------------------------*/
/* Private define ------------------------------------------------------------*/
/* Private macro -------------------------------------------------------------*/
/* Private variables ---------------------------------------------------------*/
/* Extern variables ----------------------------------------------------------*/
/* Private function prototypes -----------------------------------------------*/
/* Private functions ---------------------------------------------------------*/
/*******************************************************************************
* Function Name : OTG_DEV_Init
* Description : Initialize the OTG Device IP and EP0.
* Input : None.
* Output : None.
* Return : None.
*******************************************************************************/
void OTG_DEV_Init(void)
{
EP_DESCRIPTOR ep_descriptor;
/* Init peripheral driver */
PCD_Init();
/* Configure and open the IN control EP0 */
ep_descriptor.bEndpointAddress = 0x80;
ep_descriptor.wMaxPacketSize = 64;
ep_descriptor.bmAttributes = USB_ENDPOINT_XFER_CONTROL;
PCD_EP_Open(&ep_descriptor);
/* Configure and open the OUT control EP0 */
ep_descriptor.bEndpointAddress = 0x00;
PCD_EP_Open(&ep_descriptor);
OTGD_FS_EPStartXfer(PCD_GetOutEP(0));
/* Enable EP0 to start receiving setup packets */
PCD_EP0_OutStart();
/* Enable USB Global interrupt */
OTGD_FS_EnableGlobalInt();
}
/*******************************************************************************
* Function Name : OTG_DEV_EP_Init
* Description : Initialize the selected endpoint parameters
* Input : - bEpAdd: address of the endpoint (epnum|epdir)
* example: EP1 OUT -> 0x01 and EP1 IN 0x81.
* - bEpType: OTG_DEV_EP_TYPE_CONTROL, OTG_DEV_EP_TYPE_ISOC,
* OTG_DEV_EP_TYPE_BULK, OTG_DEV_EP_TYPE_INT
* - wEpMaxPackSize: The EP max packet size.
* Output : None.
* Return : Status: New status to be set for the endpoint:
*******************************************************************************/
void OTG_DEV_EP_Init(uint8_t bEpAdd, uint8_t bEpType, uint16_t wEpMaxPackSize)
{
EP_DESCRIPTOR ep_descriptor;
USB_OTG_EP *ep;
/* Set the EP parameters in a structure */
ep_descriptor.bEndpointAddress = bEpAdd;
ep_descriptor.bmAttributes = bEpType;
ep_descriptor.wMaxPacketSize = wEpMaxPackSize;
PCD_EP_Flush(bEpAdd);
/* Open the EP with entered parameters */
PCD_EP_Open(&ep_descriptor);
/* Activate the EP if it is an OUT EP */
if ((bEpAdd & 0x80) == 0)
{
ep = PCD_GetOutEP(bEpAdd & 0x7F);
OTGD_FS_EPStartXfer(ep);
}
else
{
ep = PCD_GetInEP(bEpAdd & 0x7F);
ep->even_odd_frame = 0;
OTG_DEV_SetEPTxStatus(bEpAdd, DEV_EP_TX_NAK);
}
}
/*******************************************************************************
* Function Name : OTG_DEV_GetEPTxStatus
* Description : Set the related endpoint status.
* Input : Number of the endpoint.
* Output : None.
* Return : Status: New status to be set for the endpoint:
*******************************************************************************/
uint32_t OTG_DEV_GetEPTxStatus(uint8_t bEpnum)
{
USB_OTG_EP *ep;
uint32_t status = 0;
ep = PCD_GetInEP(bEpnum & 0x7F);
status = OTGD_FS_GetEPStatus(ep);
return status;
}
/*******************************************************************************
* Function Name : OTG_DEV_GetEPRxStatus
* Description : returns the related endpoint status.
* Input : Number of the endpoint.
* Output : None.
* Return : Status: New status to be set for the endpoint:
*******************************************************************************/
uint32_t OTG_DEV_GetEPRxStatus(uint8_t bEpnum)
{
USB_OTG_EP *ep;
uint32_t status = 0;
ep = PCD_GetOutEP(bEpnum & 0x7F);
status = OTGD_FS_GetEPStatus(ep);
return status;
}
/*******************************************************************************
* Function Name : OTG_DEV_SetEPTxStatus
* Description : Sets the related endpoint status.
* Input : - bEpnum: Number of the endpoint.
* - Status: New status to be set for the endpoint. It can be
* DEV_EP_TX_VALID, DEV_EP_TX_STALL, DEV_EP_TX_NAK or
* DEV_EP_TX_DISABLE.
* Output : None.
* Return : None.
*******************************************************************************/
void OTG_DEV_SetEPTxStatus(uint8_t bEpnum, uint32_t Status)
{
USB_OTG_EP *ep;
ep = PCD_GetInEP(bEpnum & 0x7F);
if ((bEpnum == 0x80) && (Status == DEV_EP_TX_STALL))
{
ep->is_in = 1;
}
OTGD_FS_SetEPStatus(ep, Status);
}
/*******************************************************************************
* Function Name : OTG_DEV_SetEPRxStatus
* Description : Sets the related endpoint status.
* Input : - bEpnum: Number of the endpoint.
* - Status: New status to be set for the endpoint. It can be
* DEV_EP_RX_VALID, DEV_EP_RX_STALL, DEV_EP_RX_NAK or
* DEV_EP_RX_DISABLE.
* Output : None.
* Return : None.
*******************************************************************************/
void OTG_DEV_SetEPRxStatus(uint8_t bEpnum, uint32_t Status)
{
USB_OTG_EP *ep;
ep = PCD_GetOutEP(bEpnum & 0x7F);
OTGD_FS_SetEPStatus(ep, Status);
}
/*******************************************************************************
* Function Name : USB_DevDisconnect
* Description : Disconnect the Pull-up resist.
* Input : bEpNum: Endpoint Number.
* wState: new state.
* Output : None.
* Return : None.
*******************************************************************************/
void USB_DevDisconnect(void)
{
PCD_DevDisconnect();
}
/*******************************************************************************
* Function Name : USB_DevConnect
* Description : Disconnect the .
* Input : bEpNum: Endpoint Number.
* wState: new state.
* Output : None.
* Return : None.
*******************************************************************************/
void USB_DevConnect(void)
{
PCD_DevConnect();
}
/*-*-*-*-*-*-*-*-*-* Replace the usb_regs.h defines -*-*-*-*-*-*-*-*-*-*-*-*-*/
/*******************************************************************************
* Function Name : SetEPTxStatus
* Description : Set the status of Tx endpoint.
* Input : bEpNum: Endpoint Number.
* wState: new state.
* Output : None.
* Return : None.
*******************************************************************************/
void SetEPTxStatus(uint8_t bEpNum, uint16_t wState)
{
_SetEPTxStatus(bEpNum, wState);
}
/*******************************************************************************
* Function Name : SetEPRxStatus
* Description : Set the status of Rx endpoint.
* Input : bEpNum: Endpoint Number.
* wState: new state.
* Output : None.
* Return : None.
*******************************************************************************/
void SetEPRxStatus(uint8_t bEpNum, uint16_t wState)
{
_SetEPRxStatus(bEpNum, wState);
}
/*******************************************************************************
* Function Name : GetEPTxStatus
* Description : Returns the endpoint Tx status.
* Input : bEpNum: Endpoint Number.
* Output : None.
* Return : Endpoint TX Status
*******************************************************************************/
uint16_t GetEPTxStatus(uint8_t bEpNum)
{
return(_GetEPTxStatus(bEpNum));
}
/*******************************************************************************
* Function Name : GetEPRxStatus
* Description : Returns the endpoint Rx status.
* Input : bEpNum: Endpoint Number.
* Output : None.
* Return : Endpoint RX Status
*******************************************************************************/
uint16_t GetEPRxStatus(uint8_t bEpNum)
{
return(_GetEPRxStatus(bEpNum));
}
/*******************************************************************************
* Function Name : SetEPTxValid
* Description : Valid the endpoint Tx Status.
* Input : bEpNum: Endpoint Number.
* Output : None.
* Return : None.
*******************************************************************************/
void SetEPTxValid(uint8_t bEpNum)
{
_SetEPTxStatus(bEpNum, EP_TX_VALID);
}
/*******************************************************************************
* Function Name : SetEPRxValid
* Description : Valid the endpoint Rx Status.
* Input : bEpNum: Endpoint Number.
* Output : None.
* Return : None.
*******************************************************************************/
void SetEPRxValid(uint8_t bEpNum)
{
_SetEPRxStatus(bEpNum, EP_RX_VALID);
}
/*******************************************************************************
* Function Name : GetTxStallStatus
* Description : Returns the Stall status of the Tx endpoint.
* Input : bEpNum: Endpoint Number.
* Output : None.
* Return : Tx Stall status.
*******************************************************************************/
uint16_t GetTxStallStatus(uint8_t bEpNum)
{
return(_GetTxStallStatus(bEpNum));
}
/*******************************************************************************
* Function Name : GetRxStallStatus
* Description : Returns the Stall status of the Rx endpoint.
* Input : bEpNum: Endpoint Number.
* Output : None.
* Return : Rx Stall status.
*******************************************************************************/
uint16_t GetRxStallStatus(uint8_t bEpNum)
{
return(_GetRxStallStatus(bEpNum));
}
/*******************************************************************************
* Function Name : SetEPTxCount.
* Description : Set the Tx count.
* Input : bEpNum: Endpoint Number.
* wCount: new count value.
* Output : None.
* Return : None.
*******************************************************************************/
void SetEPTxCount(uint8_t bEpNum, uint16_t wCount)
{
}
/*******************************************************************************
* Function Name : SetEPRxCount
* Description : Set the Rx count.
* Input : bEpNum: Endpoint Number.
* wCount: the new count value.
* Output : None.
* Return : None.
*******************************************************************************/
void SetEPRxCount(uint8_t bEpNum, uint16_t wCount)
{
}
/*******************************************************************************
* Function Name : ToWord
* Description : merge two byte in a word.
* Input : bh: byte high, bl: bytes low.
* Output : None.
* Return : resulted word.
*******************************************************************************/
uint16_t ToWord(uint8_t bh, uint8_t bl)
{
uint16_t wRet = 0;
wRet = (uint16_t)bl | ((uint16_t)bh << 8);
return(wRet);
}
/*******************************************************************************
* Function Name : ByteSwap
* Description : Swap two byte in a word.
* Input : wSwW: word to Swap.
* Output : None.
* Return : resulted word.
*******************************************************************************/
uint16_t ByteSwap(uint16_t wSwW)
{
uint8_t bTemp = 0;
uint16_t wRet = 0;
bTemp = (uint8_t)(wSwW & 0xff);
wRet = (wSwW >> 8) | ((uint16_t)bTemp << 8);
return(wRet);
}
#endif /* STM32F10X_CL */
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
Reference in New Issue View Git Blame Copy Permalink