mirror of
https://github.com/eddyem/CCD_Capture.git
synced 2026-11-22 13:50:21 +03:00
v1.2.2: a lot of bugs fixed
This commit is contained in:
309
Readme.md
309
Readme.md
@@ -1,7 +1,7 @@
|
||||
CCD/CMOS imaging server
|
||||
=======================
|
||||
|
||||
Supports FLI cameras/focusers/wheels and cameras: ZWO, Basler, HikRobot, PointGrey, Apogee.
|
||||
Supports FLI cameras/focusers/wheels and cameras: ZWO, Basler, HikRobot, PointGrey, Apogee, ToupCam.
|
||||
Allows to run as standalone application or imaging server/client.
|
||||
|
||||
To restart server (e.g. if hardware was off) kill it with SIGUSR1 or send command `restartTheServer`.
|
||||
@@ -9,8 +9,8 @@ To restart server (e.g. if hardware was off) kill it with SIGUSR1 or send comman
|
||||
## Compile
|
||||
The tool itself depends on [usefull_macros](https://github.com/eddyem/snippets_library) librariy.
|
||||
"Artifical star" plugin depends on my [improclib](https://github.com/eddyem/improclib).
|
||||
Image viewer depends on OpenGL and GLUT libraries (also depending on X11).
|
||||
All other plugins (excluding "dummy camera") depends on third-party libraries. Apogee plugin also
|
||||
The image viewer depends on OpenGL and GLUT libraries (also depending on X11).
|
||||
All other plugins (excluding "dummy camera") depends on third-party libraries. The Apogee plugin also
|
||||
depends on [apogee C wrapper](https://github.com/eddyem/apogee_control/tree/master/apogee_C_wrapper).
|
||||
|
||||
I will try later to combine all third-party libraries in this repository.
|
||||
@@ -28,12 +28,15 @@ cmake options:
|
||||
- `-DFLYCAP=ON` - compile GrassHopper PointGrey plugin
|
||||
- `-DHIKROBOT=ON` - compile HikRobot support plugin
|
||||
- `-DIMAGEVIEW=OFF` - compile without image viewer support (OpenGL!!!)
|
||||
- `-DTOUPCAM=ON` - compile ToupCam support plugin
|
||||
- `-DZWO=ON` - compile ZWO support plugin
|
||||
|
||||
## Usage
|
||||
|
||||
```
|
||||
Usage: ccd_capture [args] [output file prefix]
|
||||
Args are:
|
||||
Args are:
|
||||
-0, --timeout=arg network answer timeout (default: 0.1s)
|
||||
-8, --8bit run in 8-bit mode
|
||||
-A, --author=arg program author
|
||||
-C, --cameradev=arg camera device plugin (e.g. devfli.so)
|
||||
@@ -44,10 +47,10 @@ Usage: ccd_capture [args] [output file prefix]
|
||||
-N, --obsname=arg observers' names
|
||||
-O, --object=arg object name
|
||||
-P, --prog-id=arg observing program name
|
||||
-V, --verbose verbose level (-V - messages, -VV - debug, -VVV - all shit)
|
||||
-V, --verbose verbose level (-V - main messages, -VV - secondary messages, -VVV - debug)
|
||||
-W, --wheeldev=arg wheel device plugin (e.g. devdummy.so)
|
||||
-Y, --objtype=arg object type (neon, object, flat etc)
|
||||
-_, --plugincmd custom camera device plugin command
|
||||
-_, --plugincmd=arg custom camera device plugin command (can occur multiple times)
|
||||
-a, --addsteps=arg move focuser to relative position, mm (only for standalone)
|
||||
-c, --conf-ioport=arg configure I/O port pins to given value (decimal number, pin1 is LSB, 1 == output, 0 == input)
|
||||
-d, --dark not open shutter, when exposing ("dark frames")
|
||||
@@ -60,7 +63,7 @@ Usage: ccd_capture [args] [output file prefix]
|
||||
-n, --nframes=arg make series of N frames
|
||||
-o, --outfile=arg output file name
|
||||
-p, --pause=arg make pause for N seconds between expositions
|
||||
-r, --addrec add records to header from given file[s]
|
||||
-r, --addrec=arg add records to header from given file[s] (can occur multiple times)
|
||||
-s, --set-ioport=arg set I/O port pins to given value (decimal number, pin1 is LSB)
|
||||
-t, --set-temp=arg set CCD temperature to given value (degr C)
|
||||
-v, --vbin=arg vertical binning to N pixels
|
||||
@@ -77,26 +80,37 @@ Usage: ccd_capture [args] [output file prefix]
|
||||
--client run as client
|
||||
--close-shutter close shutter
|
||||
--focdevno=arg focuser device number (if many: 0, 1, 2 etc)
|
||||
--forceimsock force using image through socket transition even if can use SHM
|
||||
--gain=arg CMOS gain level
|
||||
--help show this help
|
||||
--imageport=arg INET image socket port
|
||||
--host=arg server's host name
|
||||
--imageport=arg INET image socket port (default: port+1)
|
||||
--infty=arg start (!=0) or stop(==0) infinity capturing loop
|
||||
--logfile=arg logging file name (if run as server)
|
||||
--open-shutter open shutter
|
||||
--path=arg UNIX socket name (command socket)
|
||||
--plugin=arg common device plugin (e.g devfli.so)
|
||||
--port=arg local INET command socket port
|
||||
--port=arg INET command socket port (omit if use on same host with server)
|
||||
--restart restart image server
|
||||
--rewrite rewrite output file if exists
|
||||
--server run as server
|
||||
--set-fan=arg set fan speed (0 - off, 1 - low, 2 - high)
|
||||
--shutter-on-high run exposition on HIGH @ pin5 I/O port
|
||||
--shutter-on-low run exposition on LOW @ pin5 I/O port
|
||||
--viewer passive viewer (only get last images)
|
||||
--wait wait while exposition ends
|
||||
--wheeldevno=arg filter wheel device number (if many: 0, 1, 2 etc)
|
||||
```
|
||||
|
||||
Notes:
|
||||
|
||||
- A UNIX command socket named `@ccd_capture` is created/used automatically
|
||||
(abstract namespace, no file on disk). There is no `--path` option; the
|
||||
name is hardcoded in `socket.h` as `UNIX_SOCK_NAME`.
|
||||
- If neither `--port` nor `--imageport` is given, the client receives images
|
||||
through shared memory (see `-k/--shmkey`). To force image transmission over
|
||||
INET, point `--host`, `--port` and/or `--imageport` (this replaces the removed `--forceimsock`).
|
||||
If server run without `--port`, there's only shared memory mechanism to grab images for client.
|
||||
- If `--port` is given without `--imageport`, the latter is set to `port+1` automatically.
|
||||
|
||||
|
||||
## Image viewer
|
||||
In image view mode you can display menu by clicking of right mouse key or use shortcuts:
|
||||
|
||||
@@ -124,105 +138,126 @@ Mouse functions:
|
||||
When you run the server you need at least to point:
|
||||
|
||||
- camera plugin (`-C libdev….so`);
|
||||
- command socket: it could be local INET socket (then by default image socket will have next number),
|
||||
just point `--port=port`, or UNIX socket, then point `--path=path` (for unnamed sockets use "\0" as first
|
||||
path letter);
|
||||
- image socket (optionally): `--imageport=port` - to have ability to transmit image to other PCs by
|
||||
network INET socket (default value: 12345 if no command socket port used, or cmdport+1);
|
||||
- shared memory key for fast local image transmission, `-k=key` (default value: 7777777).
|
||||
- a way to accept commands:
|
||||
- UNIX socket `@ccd_capture` - always opened by the server; the local client
|
||||
connects to it by default when no `--port` is given;
|
||||
- optionally an INET command socket, via `--port=port`;
|
||||
- optionally an INET image socket, via `--imageport=port`; if you point `--port`
|
||||
but not `--imageport`, the latter defaults to `port+1`;
|
||||
- shared memory key for fast local image transmission, `-k=key` (default: `7777777`).
|
||||
|
||||
To send commands to server you can use client, open `netcat` session, use my [tty_term](https://github.com/eddyem/tty_term)
|
||||
or any other tools. Server have text protocol (send `help\n` to see full list):
|
||||
To send commands to server you can use the client, `netcat` session, my
|
||||
[tty_term](https://github.com/eddyem/tty_term) or any other tool. The server speaks a simple
|
||||
line-based text protocol (send `help` to see the full list).
|
||||
|
||||
- 8bit - run in 8 bit mode instead of 16 bit
|
||||
- author - FITS 'AUTHOR' field
|
||||
- brightness - camera brightness
|
||||
- camdevno - camera device number
|
||||
- camlist - list all connected cameras
|
||||
- ccdfanspeed - fan speed of camera
|
||||
- confio - camera IO configuration
|
||||
- dark - don't open shutter @ exposure
|
||||
- expstate - get exposition state
|
||||
- exptime - exposition time
|
||||
- fastspeed - fast readout speed
|
||||
- filename - save file with this name, like file.fits
|
||||
- filenameprefix - prefix of files, like ex (will be saved as exXXXX.fits)
|
||||
- focdevno - focuser device number
|
||||
- foclist - list all connected focusers
|
||||
- focpos - focuser position
|
||||
- format - camera frame format (X0,Y0,X1,Y1)
|
||||
- gain - camera gain
|
||||
- getheaders - get last file FITS headers
|
||||
- hbin - horizontal binning
|
||||
- headerfiles - add FITS records from these files (comma-separated list)
|
||||
- help - show this help
|
||||
- imheight - last image height
|
||||
- imwidth - last image width
|
||||
- info - connected devices state
|
||||
- infty - an infinity loop taking images until there's connected clients
|
||||
- instrument - FITS 'INSTRUME' field
|
||||
- io - get/set camera IO
|
||||
- lastfilename - path to last saved file
|
||||
- maxformat - camera maximal available format
|
||||
- nflushes - camera number of preflushes
|
||||
- object - FITS 'OBJECT' field
|
||||
- objtype - FITS 'IMAGETYP' field
|
||||
- observer - FITS 'OBSERVER' field
|
||||
- plugincmd - custom camera plugin command
|
||||
- program - FITS 'PROG-ID' field
|
||||
- restartTheServer - restart server
|
||||
- rewrite - rewrite file (if give `filename`, not `filenameprefix`)
|
||||
- shmemkey - get shared memory key
|
||||
- shutter - camera shutter's operations
|
||||
- tcold - camera chip temperature
|
||||
- tremain - time (in seconds) of exposition remained
|
||||
- vbin - vertical binning
|
||||
- wdevno - wheel device number
|
||||
- wlist - list all connected wheels
|
||||
- wpos - wheel position
|
||||
### Protocol
|
||||
Each request is a single line, terminated by `\n`:
|
||||
|
||||
Send `expstate=1` to start capture. As only the frame is ready server will send `expstate=4` to all
|
||||
clients connected.
|
||||
- `key` - getter or command without arguments
|
||||
- `key=value` - setter
|
||||
|
||||
When you send a command to server you will receive:
|
||||
The server answers with one line (or several, for `help`, `camlist`, `foclist`,
|
||||
`wlist`):
|
||||
|
||||
- one of answers - "OK" (all OK), "BUSY" (can't run setter because camera is busy), "FAIL" (some error
|
||||
occurred), "BADKEY" (wrong key name) or "BADVAL" (wrong key's value) - for procedures and setters
|
||||
(instead of "OK" you will give "parameter=value" for setter if all OK);
|
||||
- "parameter=value" for getters.
|
||||
- `OK` - the command completed successfully
|
||||
- `BUSY` - cannot run the command now (camera is busy)
|
||||
- `FAIL` - some error occurred
|
||||
- `BADKEY` - unknown key
|
||||
- `BADVAL` - invalid value for the key
|
||||
- `key=value` - for getters (and setters, as echo of the new value)
|
||||
|
||||
Command `info` equivalent to sequential commands `camlist`, `hbin`, `vbin`, `tcold`, `tbody`, `thot`,
|
||||
`exptime`, `lastfilename`, `expstate` and `camflags`.
|
||||
### Supported commands
|
||||
|
||||
Command `getheaders` returns base FITS-header of last file.
|
||||
| Command | Description |
|
||||
|---------------------|-------------|
|
||||
| `brightness[=V]` | get/set camera brightness |
|
||||
| `camdevno[=N]` | get/set active camera number |
|
||||
| `camfanspeed[=N]` | get/set camera fan speed (0..2) |
|
||||
| `camflags` | get flags: bit0 - start capture, bit1 - cancel, bit2 - restart server |
|
||||
| `camlist` | list all connected cameras (one `camlist='model'` line per camera) |
|
||||
| `confio[=N]` | configure I/O port |
|
||||
| `dark[=0/1]` | don't open shutter on exposure (dark frames) |
|
||||
| `expstate[=N]` | see below |
|
||||
| `exptime[=V]` | get/set exposure time (s) |
|
||||
| `fastspeed[=0/1]` | get/set fast readout mode |
|
||||
| `focdevno[=N]` | get/set active focuser |
|
||||
| `foclist` | list all connected focusers |
|
||||
| `focmaxpos` | get maximal focuser position |
|
||||
| `focminpos` | get minimal focuser position |
|
||||
| `focpos[=V]` | get/set focuser position (mm) |
|
||||
| `foctemp` | get focuser body temperature |
|
||||
| `format[=X0,Y0,X1,Y1]` | get/set camera frame format |
|
||||
| `gain[=V]` | get/set camera gain |
|
||||
| `hbin[=N]` | get/set horizontal binning |
|
||||
| `help` | show this help |
|
||||
| `imnumber` | number of grabbed images since the server start |
|
||||
| `imwidth` / `imheight` | width/height of the last image |
|
||||
| `infty[=0/1]` | run/stop the infinity capturing loop |
|
||||
| `io[=N]` | get/set I/O port state |
|
||||
| `lowres[=0/1]` | run in 8-bit mode instead of 16-bit |
|
||||
| `maxformat` | get maximal available frame format |
|
||||
| `nflushes[=N]` | get/set number of pre-flushes |
|
||||
| `plugincmd=KEY[=VAL]` | custom camera plugin command |
|
||||
| `restartTheServer` | restart the server |
|
||||
| `shmemkey` | get shared memory key |
|
||||
| `shutter=N` | run shutter command (0=open, 1=close, 2=expose @HIGH, 3=expose @LOW) |
|
||||
| `tcold[=V]` | get/set cold-side temperature; also returns `tbody=` and `thot=` if supported |
|
||||
| `tremain` | remaining exposure time (s) |
|
||||
| `vbin[=N]` | get/set vertical binning |
|
||||
| `wdevno[=N]` | get/set active wheel |
|
||||
| `wlist` | list all connected wheels |
|
||||
| `wmaxpos` | get maximal wheel position |
|
||||
| `wpos[=N]` | get/set wheel position |
|
||||
| `wtemp` | get wheel body temperature |
|
||||
|
||||
|
||||
`expstate` values:
|
||||
|
||||
- `0` - idle (sending `expstate=0` cancels the current exposition);
|
||||
- `1` - capturing (sending `expstate=1` starts an exposition);
|
||||
- `2` - frame is ready (invalid for setter);
|
||||
- `3` - error (invalid for setter).
|
||||
|
||||
Server doesn't sends to client any asynchronous data.
|
||||
|
||||
### Custom plugin commands
|
||||
Since version 1.2.0 a custom plugin command system is available. To list the available commands,
|
||||
run the client/server with `--plugincmd=help`, or send `plugincmd=help` to a running server.
|
||||
Commands can be procedures/flags (`plugincmd=cmd`) or setters/getters (`plugincmd=key` and
|
||||
`plugincmd=key=value`).
|
||||
|
||||
To transmit these custom commands to the server use `plugincmd=key[=value]`.
|
||||
|
||||
## Client
|
||||
To run client you should point `--client` and same ports' options like for server (command socket and
|
||||
image SHM key or socket).
|
||||
Use `--forceimsock` to forse getting image through INET socket even if run on the same PC as server.
|
||||
Client have no options to connect to server on other host, so you need to make proxy with ssh or other
|
||||
tool. Maybe later I will add `--host` option for these purposes (but for security you will still have
|
||||
to use ssh-proxy for command socket).
|
||||
To run the client you should point `--client` and the same port options as for
|
||||
the server (command socket and image SHM key or image socket):
|
||||
|
||||
Using client as pure viewer (using `--viewer` option) you can't run expositions - just can view last
|
||||
files done by command from other clients. But if you will send to server `infty=1`, it will run in
|
||||
infinity mode, making frame by frame while at least one client connected. To turn this off send
|
||||
`infty=0`.
|
||||
- `--host=HOST` (optional) - server host name / IP for INET command socket;
|
||||
- `--port=PORT` (optional) - INET command socket port; if omitted, the client
|
||||
connects to the UNIX socket `@ccd_capture` on the local host;
|
||||
- `--imageport=PORT` (optional) - INET image socket port; if omitted, the client
|
||||
receives images through the shared memory segment `-k/--shmkey`;
|
||||
- `-k/--shmkey=KEY` (optional) - shared memory key for image data.
|
||||
|
||||
Without image view options (`--viewer` or `-D`) client just send given options to server and shuts down,
|
||||
but you can wait until image done with option `--wait` (be careful: when reading process takes too long
|
||||
time taking server in busy state, client can decide to shut down by timeout).
|
||||
Client modes:
|
||||
|
||||
## Plugins custom commands
|
||||
Since version 1.2.0 introduced custom camera plugin commands system. Commonly to read help just
|
||||
type `-_help`. You can point as much custom commands in one commandline as you need. They can be a
|
||||
procedures/flags (like `-_cmd`) or a setters/getters (like `-_key` and `-_key=value`).
|
||||
- with `--viewer` - opens the OpenGL viewer and passively receives
|
||||
images from the server (in this mode the client cannot start expositions);
|
||||
to produce images continuously the server must be set to `infty=1`, or other
|
||||
clients must send `expstate=1`;
|
||||
- with `--display` (or `-D`) - opens the OpenGL window and continuously requests server for
|
||||
new images (you should point `--exptime=T` (or `-x T`) for specific exposition time;
|
||||
- without viewer options - sends the given options to the server and exits;
|
||||
if you specify `--outfile`, `--outfileprefix` or `--nframes>0`, the client
|
||||
starts an exposition, waits for the image, and optionally saves it as FITS.
|
||||
|
||||
To transmit these custom commands to server use `plugincmd=key[=value]`.
|
||||
`--forceimsock` was removed; use `--port` and optionally `--imageport` to force image transfer over
|
||||
INET socket instead of shared memory
|
||||
|
||||
### Dummy camera plugin custom commands
|
||||
This plugin simply emulates image aqcuisition process where images are 2-D sinusoide with given periods.
|
||||
Each next frame will be shifted by one pixel.
|
||||
|
||||
## Dummy camera plugin
|
||||
The plugin simply emulates the acquisition process: images are a 2-D sinusoid
|
||||
with given periods, shifted by one pixel each frame.
|
||||
|
||||
Commands:
|
||||
|
||||
@@ -230,29 +265,31 @@ Commands:
|
||||
- py = (double) [1, inf] - set/get sin period over Y axis (pix)
|
||||
|
||||
|
||||
### Artifical star plugin custom commands
|
||||
This plugin lets you to emulate star field with up to 32 stars. You can shift center of field emulating
|
||||
telescope correction, also you can rotate field emulating derotation.
|
||||
All stars (Moffat) have the same FWHM and scale parameters. Their coordinates (arcsec) are given by arrays `x`
|
||||
and `y` with a hardware magnitude `mag`. You can emulate image drift and rotation. Also you can add
|
||||
a little image position (full frame position) fluctuations. To emulate poisson noice just point its `lambda`
|
||||
value (`lambda==1` means no noise).
|
||||
## Artifical star plugin
|
||||
The plugin emulates a star field with up to `MAX_STARS` (32) stars. You can shift the center of the
|
||||
field to emulate telescope correction and rotate the field to emulate derotation. All stars are
|
||||
Moffat profiles with the same FWHM and scale parameters. Their coordinates (arcsec) are stored in
|
||||
arrays `x` and `y`, with magnitudes in `mag`. You can emulate image drift, rotation, short-exposure
|
||||
position fluctuations, and Poisson noise (`lambda==1` means "no noise").
|
||||
|
||||
Two additional commands - `mask` and `bkg` allows you to load binary mask and background.
|
||||
The background image (8-bit monochrome) will be added to generated star field. After that if you
|
||||
pointed an mask image it will be AND-ed with result: all non-zero pixels on mask remains the same
|
||||
pixels of resulting image, but zeros will clean them emulating holes or screens.
|
||||
And at last Poisson noice will be added to full frame.
|
||||
Two additional commands - `mask` and `bkg` - allow you to load a binary mask and a background
|
||||
image. The background (8-bit monochrome) is added to the generated star field. The mask is then
|
||||
AND-ed with the result: zero mask pixels force the output to zero, non-zero pixels are preserved.
|
||||
After that, the bias level is added and (optionally) Poisson noise is applied to the full frame.
|
||||
|
||||
Commands:
|
||||
|
||||
- beta = (double) [0.5, inf] - Moffat `beta` parameter
|
||||
- bias = (int) [0, 30000] - bias value
|
||||
- bkg = (string) - load background image
|
||||
- curstar = (int) [0, MAX_STARS-1] - set number of current star to change parameters
|
||||
- fluct = (double) [0, 3] - stars position fluctuations (arcsec per sec)
|
||||
- fwhm = (double) [0.1, 10] - stars min FWHM, arcsec
|
||||
- lambda = (double) [1, inf] - Poisson noice lambda value (>1)
|
||||
- lambda0 = (double) [1, inf] - Poisson noice lambda value (>1) for dark noise
|
||||
- mag = (double) [-30, 30] - Next star magnitude: 0m is 0xffff/0xff (16/8 bit) ADUs per second
|
||||
- mask = (string) - load mask image (binary, ANDed)
|
||||
- nstars = (int) [1, MAX_STARS] - set amount of stars (not more than MAX_STARS)
|
||||
- rotangle = (double) [0, 1.296e+06] - Starting rotation angle (arcsec)
|
||||
- scale = (double) [0.001, 3600] - CCD scale: arcsec/pix
|
||||
- vr = (double) [-36000, 36000] - rotation speed (arcsec/s)
|
||||
@@ -267,16 +304,52 @@ Commands:
|
||||
## Examples
|
||||
|
||||
### ccd_client
|
||||
|
||||
Connect to server, send `infty` and simply get up to N images (or quit if no images in 5 seconds).
|
||||
Connects to the server, optionally enables `infty`, and takes up to `N` images (or quits if no
|
||||
image is available for a few seconds).
|
||||
|
||||
Usage:
|
||||
```
|
||||
-U, --isun use UNIX socket
|
||||
-h, --help show this help
|
||||
-i, --infty run in infinity capturing loop (else - request each frame)
|
||||
-k, --shmkey=arg shared memory (with image data) key (default: 7777777)
|
||||
-n, --nframes=arg make series of N frames (2 default)
|
||||
-s, --sock=arg command socket name or port
|
||||
-x, --exptime=arg set exposure time to given value (seconds!)
|
||||
-N, --node=arg server's host (if working over net) or UNIX-socket path
|
||||
-P, --import=arg image socket port (if not 'port+1'
|
||||
-h, --help show this help
|
||||
-i, --infty run in infinity capturing loop (else - request each frame)
|
||||
-k, --shmkey=arg shared memory (with image data) key (default: 7777777)
|
||||
-n, --nframes=arg make series of N frames
|
||||
-p, --port=arg command socket port
|
||||
-x, --exptime=arg set exposure time to given value (seconds!)
|
||||
```
|
||||
|
||||
### centroids / centroids16
|
||||
Get images from the server (only over shared memory) and calculate the gravity center and moments
|
||||
of the first-order/second-order brightness. `centroids` works only in 8-bit mode and `centroids16`
|
||||
only in 16-bit mode.
|
||||
|
||||
Usage:
|
||||
```
|
||||
-N, --node=arg INET command socket host or UNIX socket name
|
||||
-b, --background=arg fixed background level
|
||||
-h, --help show this help
|
||||
-i, --infty run in infinity capturing loop (else - request each frame)
|
||||
-k, --shmkey=arg shared memory (with image data) key (default: 7777777)
|
||||
-n, --nframes=arg make series of N frames (default: 10)
|
||||
-o, --output=arg output file with T/x/y/w
|
||||
-p, --port=arg port of INET command socket
|
||||
-s, --sigmas=arg amount of sigmas [-5..15] added to image median for background calculation (default: 1)
|
||||
-x, --exptime=arg set exposure time to given value (seconds!)
|
||||
```
|
||||
|
||||
Option `--sigmas` works only for 16-bit version, as in 8-bit background calculation use
|
||||
`il_Image_background` (calculates background by histogram curve).
|
||||
|
||||
## Known issues
|
||||
|
||||
- The server requires at least one command socket (`@ccd_capture` UNIX socket
|
||||
is always created; INET command socket is optional).
|
||||
- If both `--outfile` and an output-file prefix (positional argument) are given,
|
||||
the program exits.
|
||||
- The image viewer uses OpenGL and freeglut; it needs an X11 display.
|
||||
|
||||
## License
|
||||
|
||||
This repository is provided under the GNU General Public License v3 or later.
|
||||
Full text of the GPLv3 is available at <https://www.gnu.org/licenses/gpl-3.0.html>.
|
||||
|
||||
Reference in New Issue
Block a user