From 32114c0a7729464caf5540c8a5575540468ac19f Mon Sep 17 00:00:00 2001 From: Edward Emelianov Date: Wed, 13 Jul 2022 22:04:10 +0300 Subject: [PATCH] add bta_print_header --- bta_print_header/Makefile | 43 ++ bta_print_header/Readme | 1 + bta_print_header/bta_print.c | 174 +++++ bta_print_header/bta_print.h | 25 + bta_print_header/bta_shdata.c | 356 +++++++++ bta_print_header/bta_shdata.h | 851 ++++++++++++++++++++++ bta_print_header/btaprinthdr.cflags | 1 + bta_print_header/btaprinthdr.config | 7 + bta_print_header/btaprinthdr.creator | 1 + bta_print_header/btaprinthdr.creator.user | 215 ++++++ bta_print_header/btaprinthdr.cxxflags | 1 + bta_print_header/btaprinthdr.files | 7 + bta_print_header/btaprinthdr.includes | 1 + bta_print_header/cmdlnopts.c | 76 ++ bta_print_header/cmdlnopts.h | 36 + bta_print_header/main.c | 102 +++ 16 files changed, 1897 insertions(+) create mode 100644 bta_print_header/Makefile create mode 100644 bta_print_header/Readme create mode 100644 bta_print_header/bta_print.c create mode 100644 bta_print_header/bta_print.h create mode 100644 bta_print_header/bta_shdata.c create mode 100644 bta_print_header/bta_shdata.h create mode 100644 bta_print_header/btaprinthdr.cflags create mode 100644 bta_print_header/btaprinthdr.config create mode 100644 bta_print_header/btaprinthdr.creator create mode 100644 bta_print_header/btaprinthdr.creator.user create mode 100644 bta_print_header/btaprinthdr.cxxflags create mode 100644 bta_print_header/btaprinthdr.files create mode 100644 bta_print_header/btaprinthdr.includes create mode 100644 bta_print_header/cmdlnopts.c create mode 100644 bta_print_header/cmdlnopts.h create mode 100644 bta_print_header/main.c diff --git a/bta_print_header/Makefile b/bta_print_header/Makefile new file mode 100644 index 0000000..041c303 --- /dev/null +++ b/bta_print_header/Makefile @@ -0,0 +1,43 @@ +# run `make DEF=...` to add extra defines +PROGRAM := bta_print_header +LDFLAGS := -fdata-sections -ffunction-sections -Wl,--gc-sections -Wl,--discard-all +LDFLAGS += -lusefull_macros +SRCS := $(wildcard *.c) +DEFINES := $(DEF) -D_GNU_SOURCE -D_XOPEN_SOURCE=1111 +OBJDIR := mk +CFLAGS += -O2 -Wall -Werror -Wextra -Wno-trampolines -std=gnu99 +OBJS := $(addprefix $(OBJDIR)/, $(SRCS:%.c=%.o)) +DEPS := $(OBJS:.o=.d) +CC = gcc +#CXX = g++ + + +all : $(OBJDIR) $(PROGRAM) + +$(PROGRAM) : $(OBJS) + @echo -e "\t\tLD $(PROGRAM)" + $(CC) $(LDFLAGS) $(OBJS) -o $(PROGRAM) + +$(OBJDIR): + mkdir $(OBJDIR) + +ifneq ($(MAKECMDGOALS),clean) +-include $(DEPS) +endif + +$(OBJDIR)/%.o: %.c + @echo -e "\t\tCC $<" + $(CC) -MD -c $(LDFLAGS) $(CFLAGS) $(DEFINES) -o $@ $< + +clean: + @echo -e "\t\tCLEAN" + @rm -f $(OBJS) $(DEPS) + @rmdir $(OBJDIR) 2>/dev/null || true + +xclean: clean + @rm -f $(PROGRAM) + +gentags: + CFLAGS="$(CFLAGS) $(DEFINES)" geany -g $(PROGRAM).c.tags *[hc] 2>/dev/null + +.PHONY: gentags clean xclean diff --git a/bta_print_header/Readme b/bta_print_header/Readme new file mode 100644 index 0000000..e30ba9d --- /dev/null +++ b/bta_print_header/Readme @@ -0,0 +1 @@ +This daemon uses bta_control_net-x86_64 to create and update file with FITS-header of BTA TCS data. diff --git a/bta_print_header/bta_print.c b/bta_print_header/bta_print.c new file mode 100644 index 0000000..0825164 --- /dev/null +++ b/bta_print_header/bta_print.c @@ -0,0 +1,174 @@ +/* + * This file is part of the btaprinthdr project. + * Copyright 2022 Edward V. Emelianov . + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include +#include +#include +#include +#include + +#include "bta_print.h" +#include "bta_shdata.h" + + +static char buf[1024]; +char *time_asc(double t){ + int h, m; + double s; + h = (int)(t/3600.); + m = (int)((t - (double)h*3600.)/60.); + s = t - (double)h*3600. - (double)m*60.; + h %= 24; + if(s>59) s=59; + sprintf(buf, "%d:%02d:%04.1f", h,m,s); + return buf; +} + +char *angle_asc(double a){ + char s; + int d, min; + double sec; + if (a >= 0.) + s = '+'; + else{ + s = '-'; a = -a; + } + d = (int)(a/3600.); + min = (int)((a - (double)d*3600.)/60.); + sec = a - (double)d*3600. - (double)min*60.; + d %= 360; + if(sec>59.9) sec=59.9; + sprintf(buf, "%c%d:%02d:%04.1f", s,d,min,sec); + return buf; +} + +/** + * @brief printhdr - write FITS record into output file + * @param fd - fd to write + * @param key - key + * @param val - value + * @param cmnt - comment + * @return 0 if all OK + */ +static int printhdr(int fd, const char *key, const char *val, const char *cmnt){ + char tmp[81]; + char tk[9]; + if(strlen(key) > 8){ + strncpy(tk, key, 8); + key = tk; + } + if(cmnt){ + snprintf(tmp, 81, "%-8s= %-21s / %s", key, val, cmnt); + }else{ + snprintf(tmp, 81, "%-8s= %s", key, val); + } + size_t l = strlen(tmp); + tmp[l] = '\n'; + ++l; + if(write(fd, tmp, l) != (ssize_t)l){ + WARN("write()"); + return 1; + } + return 0; +} + +#define WRHDR(k, v, c) do{if(printhdr(fd, k, v, c)){goto returning;}}while(0) +int print_header(_U_ const char *path){ + int ret = FALSE; + double dtmp; + char val[23], comment[71]; +#define COMMENT(...) do{snprintf(comment, 70, __VA_ARGS__);}while(0) +#define VAL(fmt, x) do{snprintf(val, 22, fmt, x);}while(0) +#define VALD(x) VAL("%.10f", x) +#define VALS(x) VAL("'%s'", x) + int l = strlen(path) + 7; + char *aname = MALLOC(char, l); + snprintf(aname, l, "%sXXXXXX", path); + int fd = mkstemp(aname); + if(fd < 0){ + WARN("Can't write header file, mkstemp()"); + FREE(aname); + return FALSE; + } + fchmod(fd, 0644); + WRHDR("TELESCOP", "'BTA 6m telescope'", "Telescope name"); + WRHDR("ORIGIN", "'SAO RAS'", "Organization responsible for the data"); + dtmp = S_time-EE_time; + COMMENT("Sidereal time, seconds: %s", time_asc(dtmp)); + VALD(dtmp); + WRHDR("ST", val, comment); + COMMENT("Universal time, seconds: %s", time_asc(M_time)); + VALD(M_time); + WRHDR("UT", val, comment); + VALD(JDate); + WRHDR("JD", val, "Julian date"); + switch(Tel_Focus){ + default: + case Prime: + VALS("Prime"); break; + case Nasmyth1: + VALS("Nasmyth1"); break; + case Nasmyth2: + VALS("Nasmyth2"); break; + } + WRHDR("FOCUS", val, "Observation focus"); + VAL("%.2f", val_F); + WRHDR("VAL_F", val, "Focus value of telescope (mm)"); +#define RA(ra, dec, text, pref) do{VALD(ra*15./3600.); COMMENT(text " R.A. (degr): %s", angle_asc(15.*ra)); WRHDR(pref "RA", val, comment); \ + VALD(dec/3600.); COMMENT(text " Decl (degr): %s", angle_asc(dec)); WRHDR(pref "DEC", val, comment);}while(0) + RA(CurAlpha, CurDelta, "Current object", ""); + RA(SrcAlpha, SrcDelta, "Source", "S_"); + RA(val_Alp, val_Del, "Telescope", "T_"); + VALD(tag_A/3600.); + COMMENT("Target Az (degr): %s", angle_asc(tag_A)); + WRHDR("TARG_A", val, comment); + VALD(tag_Z/3600.); + COMMENT("Target ZD (degr): %s", angle_asc(tag_Z)); + WRHDR("TARG_Z", val, comment); + VALD(val_A/3600.); + COMMENT("Telescope Az (degr): %s", angle_asc(val_A)); + WRHDR("A", val, comment); + VALD(val_Z/3600.); + COMMENT("Telescope ZD (degr): %s", angle_asc(val_Z)); + WRHDR("Z", val, comment); + VALD(tag_P/3600.); + COMMENT("Target rotation angle (degr): %s", angle_asc(tag_P)); + WRHDR("TARG_R", val, comment); + VALD(val_P/3600.); + COMMENT("Telescope rotation angle (degr): %s", angle_asc(val_P)); + WRHDR("ROTANGLE", val, comment); + VALD(val_D/3600.); + COMMENT("Dome Az (degr): %s", angle_asc(val_D)); + WRHDR("DOME_A", val, comment); +#define T(hdr, t, text) do{VAL("%.1f", t); COMMENT(text " temperature (degC)"); WRHDR(hdr, val, comment);}while(0) + T("OUTTEMP", val_T1, "Outern"); + T("DOMETEMP", val_T2, "In-dome"); + T("MIRRTEMP", val_T3, "Mirror"); + VAL("%.1f", val_B); + WRHDR("PRESSURE", val, "Atm. pressure (mmHg)"); + VAL("%.1f", val_Wnd); + WRHDR("WIND", val, "Wind speed (m/s)"); + VAL("%.0f", val_Hmd); + WRHDR("HUMIDITY", val, "Relative humidity (%)"); + ret = TRUE; +returning: + close(fd); + rename(aname, path); + FREE(aname); + return ret; +} diff --git a/bta_print_header/bta_print.h b/bta_print_header/bta_print.h new file mode 100644 index 0000000..07f8504 --- /dev/null +++ b/bta_print_header/bta_print.h @@ -0,0 +1,25 @@ +/* + * This file is part of the btaprinthdr project. + * Copyright 2022 Edward V. Emelianov . + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once +#ifndef BTA_PRINT_H__ +#define BTA_PRINT_H__ + +int print_header(const char *path); + +#endif // BTA_PRINT_H__ diff --git a/bta_print_header/bta_shdata.c b/bta_print_header/bta_shdata.c new file mode 100644 index 0000000..bd6ec4f --- /dev/null +++ b/bta_print_header/bta_shdata.c @@ -0,0 +1,356 @@ +// (C) V.S. Shergin, SAO RAS +#include +#include "bta_shdata.h" + +#pragma pack(push, 4) +// Main command channel (level 5) +struct CMD_Queue mcmd = {{"Mcmd"}, 0200,0,-1,0}; +// Operator command channel (level 4) +struct CMD_Queue ocmd = {{"Ocmd"}, 0200,0,-1,0}; +// User command channel (level 2/3) +struct CMD_Queue ucmd = {{"Ucmd"}, 0200,0,-1,0}; + +#define MSGLEN (80) +static char msg[MSGLEN]; +#define WARN(...) warn(__VA_ARGS__) +#define PERR(...) do{snprintf(msg, MSGLEN, __VA_ARGS__); perror(msg);} while(0) +#ifdef EBUG + #define FNAME() fprintf(stderr, "\n%s (%s, line %d)\n", __func__, __FILE__, __LINE__) + #define DBG(...) do{fprintf(stderr, "%s (%s, line %d): ", __func__, __FILE__, __LINE__); \ + fprintf(stderr, __VA_ARGS__); \ + fprintf(stderr, "\n");} while(0) +#else + #define FNAME() do{}while(0) + #define DBG(...) do{}while(0) +#endif //EBUG + + +#ifndef BTA_MODULE +volatile struct BTA_Data *sdt; +volatile struct BTA_Local *sdtl; + +volatile struct SHM_Block sdat = { + {"Sdat"}, + sizeof(struct BTA_Data), + 2048,0444, + SHM_RDONLY, + bta_data_init, + bta_data_check, + bta_data_close, + ClientSide,-1,NULL +}; + +int snd_id = -1; // client sender ID +int cmd_src_pid = 0; // next command source PID +uint32_t cmd_src_ip = 0;// next command source IP + +/** + * Init data + */ +void bta_data_init() { + sdt = (struct BTA_Data *)sdat.addr; + sdtl = (struct BTA_Local *)(sdat.addr+sizeof(struct BTA_Data)); + if(sdat.side == ClientSide) { + if(sdt->magic != sdat.key.code) { + WARN("Wrong shared data (maybe server turned off)"); + } + if(sdt->version == 0) { + WARN("Null shared data version (maybe server turned off)"); + } + else if(sdt->version != BTA_Data_Ver) { + WARN("Wrong shared data version: I'am - %d, but server - %d ...", + BTA_Data_Ver, sdt->version ); + } + if(sdt->size != sdat.size) { + if(sdt->size > sdat.size) { + WARN("Wrong shared area size: I needs - %d, but server - %d ...", + sdat.size, sdt->size ); + } else { + WARN("Attention! Too little shared data structure!"); + WARN("I needs - %d, but server gives only %d ...", + sdat.size, sdt->size ); + WARN("May be server's version too old!?"); + } + } + return; + } + /* ServerSide */ + if(sdt->magic == sdat.key.code && + sdt->version == BTA_Data_Ver && + sdt->size == sdat.size) + return; + memset(sdat.addr, 0, sdat.maxsize); + sdt->magic = sdat.key.code; + sdt->version = BTA_Data_Ver; + sdt->size = sdat.size; + Tel_Hardware = Hard_On; + Pos_Corr = PC_On; + TrkOk_Mode = UseDiffVel | UseDiffAZ ; + inp_B = 591.; + Pressure = 595.; + PEP_code_A = 0x002aaa; + PEP_code_Z = 0x002aaa; + PEP_code_P = 0x002aaa; + PEP_code_F = 0x002aaa; + PEP_code_D = 0x002aaa; + DomeSEW_N = 1; +} + +int bta_data_check() { + return( (sdt->magic == sdat.key.code) && (sdt->version == BTA_Data_Ver) ); +} + +void bta_data_close() { + if(sdat.side == ServerSide) { + sdt->magic = 0; + sdt->version = 0; + } +} + +/** + * Allocate shared memory segment + */ +int get_shm_block(volatile struct SHM_Block *sb, int server) { + int getsize = (server)? sb->maxsize : sb->size; + // first try to find existing one + sb->id = shmget(sb->key.code, getsize, sb->mode); + if(sb->id < 0 && errno == ENOENT && server){ + // if no - try to create a new one + int cresize = sb->maxsize; + if(sb->size > cresize){ + WARN("Wrong shm maxsize(%d) < realsize(%d)",sb->maxsize,sb->size); + cresize = sb->size; + } + sb->id = shmget(sb->key.code, cresize, IPC_CREAT|IPC_EXCL|sb->mode); + } + if(sb->id < 0){ + if(server) + PERR("Can't create shared memory segment '%s'",sb->key.name); + else + PERR("Can't find shared segment '%s' (maybe no server process) ",sb->key.name); + return 0; + } + // attach it to our memory space + sb->addr = (unsigned char *) shmat(sb->id, NULL, sb->atflag); + if((long)sb->addr == -1){ + PERR("Can't attach shared memory segment '%s'",sb->key.name); + return 0; + } + if(server && (shmctl(sb->id, SHM_LOCK, NULL) < 0)){ + PERR("Can't prevents swapping of shared memory segment '%s'",sb->key.name); + return 0; + } + DBG("Create & attach shared memory segment '%s' %dbytes", sb->key.name, sb->size); + sb->side = server; + if(sb->init != NULL) + sb->init(); + return 1; +} + +int close_shm_block(volatile struct SHM_Block *sb){ + int ret; + if(sb->close != NULL) + sb->close(); + if(sb->side == ServerSide) { + // ret = shmctl(sb->id, SHM_UNLOCK, NULL); + ret = shmctl(sb->id, IPC_RMID, NULL); + } + ret = shmdt (sb->addr); + return(ret); +} + +/** + * Create|Find command queue + */ +void get_cmd_queue(struct CMD_Queue *cq, int server){ + if (!server && cq->id >= 0) { //if already in use set current + snd_id = cq->id; + return; + } + // first try to find existing one + cq->id = msgget(cq->key.code, cq->mode); + // if no - try to create a new one + if(cq->id<0 && errno == ENOENT && server) + cq->id = msgget(cq->key.code, IPC_CREAT|IPC_EXCL|cq->mode); + if(cq->id<0){ + if(server) + PERR("Can't create comand queue '%s'",cq->key.name); + else + PERR("Can't find comand queue '%s' (maybe no server process) ",cq->key.name); + return; + } + cq->side = server; + if(server){ + char buf[120]; /* выбросить все команды из очереди */ + while(msgrcv(cq->id, (struct msgbuf *)buf, 112, 0, IPC_NOWAIT) > 0); + }else + snd_id = cq->id; + cq->acckey = 0; +} + +#endif // BTA_MODULE + + +int check_shm_block(volatile struct SHM_Block *sb) { + if(sb->check) + return(sb->check()); + else return(0); +} + +/** + * Set access key in current channel + */ +void set_acckey(uint32_t newkey){ + if(snd_id < 0) return; + if(ucmd.id == snd_id) ucmd.acckey = newkey; + else if(ocmd.id == snd_id) ocmd.acckey = newkey; + else if(mcmd.id == snd_id) mcmd.acckey = newkey; +} + +/** + * Setup source data for one following command if default values + * (IP == 0 - local, PID = current) not suits + */ +void set_cmd_src(uint32_t ip, int pid) { + cmd_src_pid = pid; + cmd_src_ip = ip; +} + +#pragma pack(push, 4) +/** + * Send client commands to server + */ +void send_cmd(int cmd_code, char *buf, int size) { + struct my_msgbuf mbuf; + if(snd_id < 0) return; + if(size > 100) size = 100; + if(cmd_code > 0) + mbuf.mtype = cmd_code; + else + return; + if(ucmd.id == snd_id) mbuf.acckey = ucmd.acckey; + else if(ocmd.id == snd_id) mbuf.acckey = ocmd.acckey; + else if(mcmd.id == snd_id) mbuf.acckey = mcmd.acckey; + + mbuf.src_pid = cmd_src_pid ? cmd_src_pid : getpid(); + mbuf.src_ip = cmd_src_ip; + cmd_src_pid = cmd_src_ip = 0; + + if(size > 0) + memcpy(mbuf.mtext, buf, size); + else { + mbuf.mtext[0] = 0; + size = 1; + } + msgsnd(snd_id, (struct msgbuf *)&mbuf, size+12, IPC_NOWAIT); +} + +void send_cmd_noarg(int cmd_code) { + send_cmd(cmd_code, NULL, 0); +} +void send_cmd_str(int cmd_code, char *arg) { + send_cmd(cmd_code, arg, strlen(arg)+1); +} +void send_cmd_i1(int cmd_code, int32_t arg1) { + send_cmd(cmd_code, (char *)&arg1, sizeof(int32_t)); +} +void send_cmd_i2(int cmd_code, int32_t arg1, int32_t arg2) { + int32_t ibuf[2]; + ibuf[0] = arg1; + ibuf[1] = arg2; + send_cmd(cmd_code, (char *)ibuf, 2*sizeof(int32_t)); +} +void send_cmd_i3(int cmd_code, int32_t arg1, int32_t arg2, int32_t arg3) { + int32_t ibuf[3]; + ibuf[0] = arg1; + ibuf[1] = arg2; + ibuf[2] = arg3; + send_cmd(cmd_code, (char *)ibuf, 3*sizeof(int32_t)); +} +void send_cmd_i4(int cmd_code, int32_t arg1, int32_t arg2, int32_t arg3, int32_t arg4) { + int32_t ibuf[4]; + ibuf[0] = arg1; + ibuf[1] = arg2; + ibuf[2] = arg3; + ibuf[3] = arg4; + send_cmd(cmd_code, (char *)ibuf, 4*sizeof(int32_t)); +} +void send_cmd_d1(int32_t cmd_code, double arg1) { + send_cmd(cmd_code, (char *)&arg1, sizeof(double)); +} +void send_cmd_d2(int cmd_code, double arg1, double arg2) { + double dbuf[2]; + dbuf[0] = arg1; + dbuf[1] = arg2; + send_cmd(cmd_code, (char *)dbuf, 2*sizeof(double)); +} +void send_cmd_i1d1(int cmd_code, int32_t arg1, double arg2) { + struct { + int32_t ival; + double dval; + } buf; + buf.ival = arg1; + buf.dval = arg2; + send_cmd(cmd_code, (char *)&buf, sizeof(buf)); +} +void send_cmd_i2d1(int cmd_code, int32_t arg1, int32_t arg2, double arg3) { + struct { + int32_t ival[2]; + double dval; + } buf; + buf.ival[0] = arg1; + buf.ival[1] = arg2; + buf.dval = arg3; + send_cmd(cmd_code, (char *)&buf, sizeof(buf)); +} +void send_cmd_i3d1(int cmd_code, int32_t arg1, int32_t arg2, int32_t arg3, double arg4) { + struct { + int32_t ival[3]; + double dval; + } buf; + buf.ival[0] = arg1; + buf.ival[1] = arg2; + buf.ival[2] = arg3; + buf.dval = arg4; + send_cmd(cmd_code, (char *)&buf, sizeof(buf)); +} + +void encode_lev_passwd(char *passwd, int nlev, uint32_t *keylev, uint32_t *codlev){ + char salt[4]; + char *encr; + union { + uint32_t ui; + char c[4]; + } key, cod; + sprintf(salt,"L%1d",nlev); + encr = (char *)crypt(passwd, salt); + cod.c[0] = encr[2]; + key.c[0] = encr[3]; + cod.c[1] = encr[4]; + key.c[1] = encr[5]; + cod.c[2] = encr[6]; + key.c[2] = encr[7]; + cod.c[3] = encr[8]; + key.c[3] = encr[9]; + *keylev = key.ui; + *codlev = cod.ui; +} + +int find_lev_passwd(char *passwd, uint32_t *keylev, uint32_t *codlev){ + int nlev; + for(nlev = 5; nlev > 0; --nlev){ + encode_lev_passwd(passwd, nlev, keylev, codlev); + if(*codlev == code_Lev(nlev)) break; + } + return(nlev); +} + +int check_lev_passwd(char *passwd){ + uint32_t keylev,codlev; + int nlev; + nlev = find_lev_passwd(passwd, &keylev, &codlev); + if(nlev > 0) set_acckey(keylev); + return(nlev); +} + +#pragma pack(pop) diff --git a/bta_print_header/bta_shdata.h b/bta_print_header/bta_shdata.h new file mode 100644 index 0000000..8e715d7 --- /dev/null +++ b/bta_print_header/bta_shdata.h @@ -0,0 +1,851 @@ +// (C) V.S. Shergin, SAO RAS +#pragma once +#ifndef __BTA_SHDATA_H__ +#define __BTA_SHDATA_H__ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#pragma pack(push, 4) +/* + * Shared memory block + */ +struct SHM_Block { + union { + char name[5]; // memory segment identificator + key_t code; + } key; + int32_t size; // size of memory used + int32_t maxsize; // size when created + int32_t mode; // access mode (rwxrwxrwx) + int32_t atflag; // connection mode (SHM_RDONLY or 0) + void (*init)(); // init function + int32_t (*check)(); // test function + void (*close)(); // deinit function + int32_t side; // connection type: client/server + int32_t id; // connection identificator + uint8_t *addr; // connection address +}; + +extern volatile struct SHM_Block sdat; + +/* + * Command queue descriptor + */ +struct CMD_Queue { + union { + char name[5]; // queue key + key_t code; + } key; + int32_t mode; // access mode (rwxrwxrwx) + int32_t side; // connection type (Sender/Receiver - server/client) + int32_t id; // connection identificator + uint32_t acckey; // access key (for transmission from client to server) +}; + +extern struct CMD_Queue mcmd; +extern struct CMD_Queue ocmd; +extern struct CMD_Queue ucmd; + +void send_cmd_noarg(int); +void send_cmd_str(int, char *); +void send_cmd_i1(int, int32_t); +void send_cmd_i2(int, int32_t, int32_t); +void send_cmd_i3(int, int32_t, int32_t, int32_t); +void send_cmd_i4(int, int32_t, int32_t, int32_t, int32_t); +void send_cmd_d1(int, double); +void send_cmd_d2(int, double, double); +void send_cmd_i1d1(int, int32_t, double); +void send_cmd_i2d1(int, int32_t, int32_t, double); +void send_cmd_i3d1(int, int32_t, int32_t, int32_t, double); + +/******************************************************************************* +* Command list * +*******************************************************************************/ +/* name code args type */ +// Stop telescope +#define StopTel 1 +#define StopTeleskope() send_cmd_noarg( 1 ) +// High/low speed +#define StartHS 2 +#define StartHighSpeed() send_cmd_noarg( 2 ) +#define StartLS 3 +#define StartLowSpeed() send_cmd_noarg( 3 ) +// Timer setup (Ch7_15 or SysTimer) +#define SetTmr 4 +#define SetTimerMode(T) send_cmd_i1 ( 4, (int)(T)) +// Simulation (modeling) mode +#define SetModMod 5 +#define SetModelMode(M) send_cmd_i1 ( 5, (int)(M)) +// Azimuth speed code +#define SetCodA 6 +#define SetPKN_A(iA,sA) send_cmd_i2 ( 6, (int)(iA),(int)(sA)) +// Zenith speed code +#define SetCodZ 7 +#define SetPKN_Z(iZ) send_cmd_i1 ( 7, (int)(iZ)) +// Parangle speed code +#define SetCodP 8 +#define SetPKN_P(iP) send_cmd_i1 ( 8, (int)(iP)) +// Set Az velocity +#define SetVA 9 +#define SetSpeedA(vA) send_cmd_d1 ( 9, (double)(vA)) +// Set Z velocity +#define SetVZ 10 +#define SetSpeedZ(vZ) send_cmd_d1 (10, (double)(vZ)) +// Set P velocity +#define SetVP 11 +#define SetSpeedP(vP) send_cmd_d1 (11, (double)(vP)) +// Set new polar coordinates +#define SetAD 12 +#define SetRADec(Alp,Del) send_cmd_d2 (12, (double)(Alp),(double)(Del)) +// Set new azimutal coordinates +#define SetAZ 13 +#define SetAzimZ(A,Z) send_cmd_d2 (13, (double)(A),(double)(Z)) +// Goto new object by polar coords +#define GoToAD 14 +#define GoToObject() send_cmd_noarg(14 ) +// Start steering to object by polar coords +#define MoveToAD 15 +#define MoveToObject() send_cmd_noarg(15 ) +// Go to object by azimutal coords +#define GoToAZ 16 +#define GoToAzimZ() send_cmd_noarg(16 ) +// Set A&Z for simulation +#define WriteAZ 17 +#define WriteModelAZ() send_cmd_noarg(17 ) +// Set P2 mode +#define SetModP 18 +#define SetPMode(pmod) send_cmd_i1 (18, (int)(pmod)) +// Move(+-1)/Stop(0) P2 +#define P2Move 19 +#define MoveP2(dir) send_cmd_i1 (19, (int)(dir)) +// Move(+-2,+-1)/Stop(0) focus +#define FocMove 20 +#define MoveFocus(speed,time) send_cmd_i1d1(20,(int)(speed),(double)(time)) +// Use/don't use pointing correction system +#define UsePCorr 21 +#define SwitchPosCorr(pc_flag) send_cmd_i1 (21, (int)(pc_flag)) +// Tracking flags +#define SetTrkFlags 22 +#define SetTrkOkMode(trk_flags) send_cmd_i1 (22, (int)(trk_flags)) +// Set focus (0 - primary, 1 - N1, 2 - N2) +#define SetTFoc 23 +#define SetTelFocus(N) send_cmd_i1 ( 23, (int)(N)) +// Set intrinsic move parameters by RA/Decl +#define SetVAD 24 +#define SetVelAD(VAlp,VDel) send_cmd_d2 (24, (double)(VAlp),(double)(VDel)) +// Reverse Azimuth direction when pointing +#define SetRevA 25 +#define SetAzRevers(amod) send_cmd_i1 (25, (int)(amod)) +// Set P2 velocity +#define SetVP2 26 +#define SetVelP2(vP2) send_cmd_d1 (26, (double)(vP2)) +// Set pointing target +#define SetTarg 27 +#define SetSysTarg(Targ) send_cmd_i1 (27, (int)(Targ)) +// Send message to all clients (+write into protocol) +#define SendMsg 28 +#define SendMessage(Mesg) send_cmd_str (28, (char *)(Mesg)) +// RA/Decl user correction +#define CorrAD 29 +#define DoADcorr(dAlp,dDel) send_cmd_d2 (29, (double)(dAlp),(double)(dDel)) +// A/Z user correction +#define CorrAZ 30 +#define DoAZcorr(dA,dZ) send_cmd_d2 (30, (double)(dA),(double)(dZ)) +// sec A/Z user correction speed +#define SetVCAZ 31 +#define SetVCorr(vA,vZ) send_cmd_d2 (31, (double)(vA),(double)(vZ)) +// move P2 with given velocity for a given time +#define P2MoveTo 32 +#define MoveP2To(vP2,time) send_cmd_d2 (32, (double)(vP2),(double)(time)) +// Go to t/Decl position +#define GoToTD 33 +#define GoToSat() send_cmd_noarg (33 ) +// Move to t/Decl +#define MoveToTD 34 +#define MoveToSat() send_cmd_noarg (34 ) +// Empty command for synchronisation +#define NullCom 35 +#define SyncCom() send_cmd_noarg (35 ) +// Button "Start" +#define StartTel 36 +#define StartTeleskope() send_cmd_noarg(36 ) +// Set telescope mode +#define SetTMod 37 +#define SetTelMode(M) send_cmd_i1 ( 37, (int)(M)) +// Turn telescope on (oil etc) +#define TelOn 38 +#define TeleskopeOn() send_cmd_noarg(38 ) +// Dome mode +#define SetModD 39 +#define SetDomeMode(dmod) send_cmd_i1 (39, (int)(dmod)) +// Move(+-3,+-2,+-1)/Stop(0) dome +#define DomeMove 40 +#define MoveDome(speed,time) send_cmd_i1d1(40,(int)(speed),(double)(time)) +// Set account password +#define SetPass 41 +#define SetPasswd(LPass) send_cmd_str (41, (char *)(LPass)) +// Set code of access level +#define SetLevC 42 +#define SetLevCode(Nlev,Cod) send_cmd_i2(42, (int)(Nlev),(int)(Cod)) +// Set key for access level +#define SetLevK 43 +#define SetLevKey(Nlev,Key) send_cmd_i2(43, (int)(Nlev),(int)(Key)) +// Setup network +#define SetNet 44 +#define SetNetAcc(Mask,Addr) send_cmd_i2(44, (int)(Mask),(int)(Addr)) +// Input meteo data +#define SetMet 45 +#define SetMeteo(m_id,m_val) send_cmd_i1d1(45,(int)(m_id),(double)(m_val)) +// Cancel meteo data +#define TurnMetOff 46 +#define TurnMeteoOff(m_id) send_cmd_i1 (46, (int)(m_id)) +// Set time correction (IERS DUT1=UT1-UTC) +#define SetDUT1 47 +#define SetDtime(dT) send_cmd_d1 (47, (double)(dT)) +// Set polar motion (IERS polar motion) +#define SetPM 48 +#define SetPolMot(Xp,Yp) send_cmd_d2 (48, (double)(Xp),(double)(Yp)) +// Get SEW parameter +#define GetSEW 49 +#define GetSEWparam(Ndrv,Indx,Cnt) send_cmd_i3(49,(int)(Ndrv),(int)(Indx),(int)(Cnt)) +// Set SEW parameter +#define PutSEW 50 +#define PutSEWparam(Ndrv,Indx,Key,Val) send_cmd_i4(50,(int)(Ndrv),(int)(Indx),(int)(Key),(int)(Val)) +// Set lock flags +#define SetLocks 51 +#define SetLockFlags(f) send_cmd_i1 (SetLocks, (int)(f)) +// Clear lock flags +#define ClearLocks 52 +#define ClearLockFlags(f) send_cmd_i1 (ClearLocks, (int)(f)) +// Set PEP-RK bits +#define SetRKbits 53 +#define AddRKbits(f) send_cmd_i1 (SetRKbits, (int)(f)) +// Clear PEP-RK bits +#define ClrRKbits 54 +#define ClearRKbits(f) send_cmd_i1 (ClrRKbits, (int)(f)) +// Set SEW dome motor number (for indication) +#define SetSEWnd 55 +#define SetDomeDrive(ND) send_cmd_i1 (SetSEWnd, (int)(ND)) +// Turn SEW controllers of dome on/off +#define SEWsDome 56 +#define DomeSEW(OnOff) send_cmd_i1 (SEWsDome, (int)(OnOff)) + + +/******************************************************************************* +* BTA data structure definitions * +*******************************************************************************/ + +#define ServPID (sdt->pid) // PID of main program +// model +#define UseModel (sdt->model) // model variants +enum{ + NoModel = 0 // OFF + ,CheckModel // control motors by model + ,DriveModel // "blind" management without real sensors + ,FullModel // full model without telescope +}; +// timer +#define ClockType (sdt->timer) // which timer to use +enum{ + Ch7_15 = 0 // Inner timer with synchronisation by CH7_15 + ,SysTimer // System timer (synchronisation unknown) + ,ExtSynchro // External synchronisation (bta_time or xntpd) +}; +// system +#define Sys_Mode (sdt->system) // main system mode +enum{ + SysStop = 0 // Stop + ,SysWait // Wait for start (pointing) + ,SysPointAZ // Pointing by A/Z + ,SysPointAD // Pointing by RA/Decl + ,SysTrkStop // Tracking stop + ,SysTrkStart // Start tracking (acceleration to nominal velocity) + ,SysTrkMove // Tracking move to object + ,SysTrkSeek // Tracking in seeking mode + ,SysTrkOk // Tracking OK + ,SysTrkCorr // Correction of tracking position + ,SysTest // Test +}; +// sys_target +#define Sys_Target (sdt->sys_target) // system pointing target +enum{ + TagPosition = 0 // point by A/Z + ,TagObject // point by RA/Decl + ,TagNest // point to "nest" + ,TagZenith // point to zenith + ,TagHorizon // point to horizon + ,TagStatObj // point to statinary object (t/Decl) +}; +// tel_focus +#define Tel_Focus (sdt->tel_focus) // telescope focus type +enum{ + Prime = 0 + ,Nasmyth1 + ,Nasmyth2 +}; +// PCS +#define PosCor_Coeff (sdt->pc_coeff) // pointing correction system coefficients +// tel_state +#define Tel_State (sdt->tel_state) // telescope state +#define Req_State (sdt->req_state) // required state +enum{ + Stopping = 0 + ,Pointing + ,Tracking +}; +// tel_hard_state +#define Tel_Hardware (sdt->tel_hard_state) // Power state +enum{ + Hard_Off = 0 + ,Hard_On +}; +// tel_mode +#define Tel_Mode (sdt->tel_mode) // telescope mode +enum{ + Automatic = 0 // Automatic (normal) mode + ,Manual = 1 // manual mode + ,ZenHor = 2 // work when Z<5 || Z>80 + ,A_Move = 4 // hand move by A + ,Z_Move = 8 // hand move by Z + ,Balance =0x10// balancing +}; +// az_mode +#define Az_Mode (sdt->az_mode) // azimuth reverce +enum{ + Rev_Off = 0 // move by nearest way + ,Rev_On // move by longest way +}; +// p2_state +#define P2_State (sdt->p2_state) // P2 motor state +#define P2_Mode (sdt->p2_req_mode) +enum{ + P2_Off = 0 // Stop + ,P2_On // Guiding + ,P2_Plus // Move to + + ,P2_Minus = -2 // Move to - +}; +// focus_state +#define Foc_State (sdt->focus_state) // focus motor state +enum{ + Foc_Hminus = -2// fast "-" move + ,Foc_Lminus // slow "-" move + ,Foc_Off // Off + ,Foc_Lplus // slow "+" move + ,Foc_Hplus // fast "+" move +}; +// dome_state +#define Dome_State (sdt->dome_state) // dome motors state +enum{ + D_Hminus = -3 // speeds: low, medium, high + ,D_Mminus + ,D_Lminus + ,D_Off // off + ,D_Lplus + ,D_Mplus + ,D_Hplus + ,D_On = 7 // auto +}; +// pcor_mode +#define Pos_Corr (sdt->pcor_mode) // pointing correction mode +enum{ + PC_Off = 0 + ,PC_On +}; +// trkok_mode +#define TrkOk_Mode (sdt->trkok_mode) // tracking mode +enum{ + UseDiffVel = 1 // Isodrome (correction by real motors speed) + ,UseDiffAZ = 2 // Tracking by coordinate difference + ,UseDFlt = 4 // Turn on digital filter +}; +// input RA/Decl values +#define InpAlpha (sdt->i_alpha) +#define InpDelta (sdt->i_delta) +// current source RA/Decl values +#define SrcAlpha (sdt->s_alpha) +#define SrcDelta (sdt->s_delta) +// intrinsic object velocity +#define VelAlpha (sdt->v_alpha) +#define VelDelta (sdt->v_delta) +// input A/Z values +#define InpAzim (sdt->i_azim) +#define InpZdist (sdt->i_zdist) +// calculated values +#define CurAlpha (sdt->c_alpha) +#define CurDelta (sdt->c_delta) +// current values (from sensors) +#define tag_A (sdt->tag_a) +#define tag_Z (sdt->tag_z) +#define tag_P (sdt->tag_p) + // calculated corrections +#define pos_cor_A (sdt->pcor_a) +#define pos_cor_Z (sdt->pcor_z) +#define refract_Z (sdt->refr_z) +// reverse calculation corr. +#define tel_cor_A (sdt->tcor_a) +#define tel_cor_Z (sdt->tcor_z) +#define tel_ref_Z (sdt->tref_z) +// coords difference +#define Diff_A (sdt->diff_a) +#define Diff_Z (sdt->diff_z) +#define Diff_P (sdt->diff_p) +// base object velocity +#define vel_objA (sdt->vbasea) +#define vel_objZ (sdt->vbasez) +#define vel_objP (sdt->vbasep) +// correction by real speed +#define diff_vA (sdt->diffva) +#define diff_vZ (sdt->diffvz) +#define diff_vP (sdt->diffvp) +// motor speed +#define speedA (sdt->speeda) +#define speedZ (sdt->speedz) +#define speedP (sdt->speedp) +// last precipitation time +#define Precip_time (sdt->m_time_precip) +// reserved +#define Reserve (sdt->reserve) +// real motor speed (''/sec) +#define req_speedA (sdt->rspeeda) +#define req_speedZ (sdt->rspeedz) +#define req_speedP (sdt->rspeedp) +// model speed +#define mod_vel_A (sdt->simvela) +#define mod_vel_Z (sdt->simvelz) +#define mod_vel_P (sdt->simvelp) +#define mod_vel_F (sdt->simvelf) +#define mod_vel_D (sdt->simvelf) +// telescope & hand correction state +/* + * 0x8000 - + * 0x4000 - . + * 0x2000 - + * 0x1000 - P2 . + * 0x01F0 - .. 0.2 0.4 1.0 2.0 5.0("/) + * 0x000F - .. +Z -Z +A -A + */ +#define code_KOST (sdt->kost) +// different time (UTC, stellar, local) +#define M_time (sdt->m_time) +#define S_time (sdt->s_time) +#define L_time (sdt->l_time) +// PPNDD sensor (rough) code +#define ppndd_A (sdt->ppndd_a) +#define ppndd_Z (sdt->ppndd_z) +#define ppndd_P (sdt->ppndd_p) +#define ppndd_B (sdt->ppndd_b) // atm. pressure +// DUP sensor (precise) code (Gray code) +#define dup_A (sdt->dup_a) +#define dup_Z (sdt->dup_z) +#define dup_P (sdt->dup_p) +#define dup_F (sdt->dup_f) +#define dup_D (sdt->dup_d) +// binary 14-digit precise code +#define low_A (sdt->low_a) +#define low_Z (sdt->low_z) +#define low_P (sdt->low_p) +#define low_F (sdt->low_f) +#define low_D (sdt->low_d) +// binary 23-digit rough code +#define code_A (sdt->code_a) +#define code_Z (sdt->code_z) +#define code_P (sdt->code_p) +#define code_B (sdt->code_b) +#define code_F (sdt->code_f) +#define code_D (sdt->code_d) +// ADC PCL818 (8-channel) codes +#define ADC(N) (sdt->adc[(N)]) +#define code_T1 ADC(0) // External temperature code +#define code_T2 ADC(1) // In-dome temperature code +#define code_T3 ADC(2) // Mirror temperature code +#define code_Wnd ADC(3) // Wind speed code +// calculated values +#define val_A (sdt->val_a) // A, '' +#define val_Z (sdt->val_z) // Z, '' +#define val_P (sdt->val_p) // P, '' +#define val_B (sdt->val_b) // atm. pressure, mm.hg. +#define val_F (sdt->val_f) // focus, mm +#define val_D (sdt->val_d) // Dome Az, '' +#define val_T1 (sdt->val_t1) // ext. T, degrC +#define val_T2 (sdt->val_t2) // in-dome T, degrC +#define val_T3 (sdt->val_t3) // mirror T, degrC +#define val_Wnd (sdt->val_wnd) // wind speed, m/s +// RA/Decl calculated by A/Z +#define val_Alp (sdt->val_alp) +#define val_Del (sdt->val_del) +// measured speed +#define vel_A (sdt->vel_a) +#define vel_Z (sdt->vel_z) +#define vel_P (sdt->vel_p) +#define vel_F (sdt->vel_f) +#define vel_D (sdt->vel_d) +// system messages queue +#define MesgNum 3 +#define MesgLen 39 +// message type +enum{ + MesgEmpty = 0 + ,MesgInfor + ,MesgWarn + ,MesgFault + ,MesgLog +}; +#define Sys_Mesg(N) (sdt->sys_msg_buf[N]) +// access levels +#define code_Lev1 (sdt->code_lev[0]) // remote observer - only information +#define code_Lev2 (sdt->code_lev[1]) // local observer - input coordinates +#define code_Lev3 (sdt->code_lev[2]) // main observer - correction by A/Z, P2/F management +#define code_Lev4 (sdt->code_lev[3]) // operator - start/stop telescope, testing +#define code_Lev5 (sdt->code_lev[4]) // main operator - full access +#define code_Lev(x) (sdt->code_lev[(x-1)]) +// network settings +#define NetMask (sdt->netmask) // subnet mask (usually 255.255.255.0) +#define NetWork (sdt->netaddr) // subnet address (for ex.: 192.168.3.0) +#define ACSMask (sdt->acsmask) // ACS network mask (for ex.: 255.255.255.0) +#define ACSNet (sdt->acsaddr) // ACS subnet address (for ex.: 192.168.13.0) +// meteo data +#define MeteoMode (sdt->meteo_stat) +enum{ + INPUT_B = 1 // pressure + ,INPUT_T1 = 2 // external T + ,INPUT_T2 = 4 // in-dome T + ,INPUT_T3 = 8 // mirror T + ,INPUT_WND = 0x10 // wind speed + ,INPUT_HMD = 0x20 // humidity +}; +#define SENSOR_B (INPUT_B <<8) // external data flags +#define SENSOR_T1 (INPUT_T1 <<8) +#define SENSOR_T2 (INPUT_T2 <<8) +#define SENSOR_T3 (INPUT_T3 <<8) +#define SENSOR_WND (INPUT_WND<<8) +#define SENSOR_HMD (INPUT_HMD<<8) +#define ADC_B (INPUT_B <<16) // reading from ADC flags +#define ADC_T1 (INPUT_T1 <<16) +#define ADC_T2 (INPUT_T2 <<16) +#define ADC_T3 (INPUT_T3 <<16) +#define ADC_WND (INPUT_WND<<16) +#define ADC_HMD (INPUT_HMD<<16) +#define NET_B (INPUT_B <<24) // got by network flags +#define NET_T1 (INPUT_T1 <<24) +#define NET_WND (INPUT_WND<<24) +#define NET_HMD (INPUT_HMD<<24) +// input meteo values +#define inp_B (sdt->inp_b) // atm.pressure (mm.hg) +#define inp_T1 (sdt->inp_t1) // ext T +#define inp_T2 (sdt->inp_t2) // in-dome T +#define inp_T3 (sdt->inp_t3) // mirror T +#define inp_Wnd (sdt->inp_wnd) // wind +// values used for refraction calculation +#define Temper (sdt->temper) +#define Pressure (sdt->press) +// last wind gust time +#define Wnd10_time (sdt->m_time10) +#define Wnd15_time (sdt->m_time15) +// IERS DUT1 +#define DUT1 (sdt->dut1) +// sensors reading time +#define A_time (sdt->a_time) +#define Z_time (sdt->z_time) +#define P_time (sdt->p_time) +// input speeds +#define speedAin (sdt->speedain) +#define speedZin (sdt->speedzin) +#define speedPin (sdt->speedpin) +// acceleration (''/sec^2) +#define acc_A (sdt->acc_a) +#define acc_Z (sdt->acc_z) +#define acc_P (sdt->acc_p) +#define acc_F (sdt->acc_f) +#define acc_D (sdt->acc_d) +// SEW code +#define code_SEW (sdt->code_sew) +// sew data +#define statusSEW(Drv) (sdt->sewdrv[(Drv)-1].status) +#define statusSEW1 (sdt->sewdrv[0].status) +#define statusSEW2 (sdt->sewdrv[1].status) +#define statusSEW3 (sdt->sewdrv[2].status) +#define speedSEW(Drv) (sdt->sewdrv[(Drv)-1].set_speed) +#define speedSEW1 (sdt->sewdrv[0].set_speed) +#define speedSEW2 (sdt->sewdrv[1].set_speed) +#define speedSEW3 (sdt->sewdrv[2].set_speed) +#define vel_SEW(Drv) (sdt->sewdrv[(Drv)-1].mes_speed) +#define vel_SEW1 (sdt->sewdrv[0].mes_speed) +#define vel_SEW2 (sdt->sewdrv[1].mes_speed) +#define vel_SEW3 (sdt->sewdrv[2].mes_speed) +#define currentSEW(Drv) (sdt->sewdrv[(Drv)-1].current) +#define currentSEW1 (sdt->sewdrv[0].current) +#define currentSEW2 (sdt->sewdrv[1].current) +#define currentSEW3 (sdt->sewdrv[2].current) +#define indexSEW(Drv) (sdt->sewdrv[(Drv)-1].index) +#define indexSEW1 (sdt->sewdrv[0].index) +#define indexSEW2 (sdt->sewdrv[1].index) +#define indexSEW3 (sdt->sewdrv[2].index) +#define valueSEW(Drv) (sdt->sewdrv[(Drv)-1].value.l) +#define valueSEW1 (sdt->sewdrv[0].value.l) +#define valueSEW2 (sdt->sewdrv[1].value.l) +#define valueSEW3 (sdt->sewdrv[2].value.l) +#define bvalSEW(Drv,Nb) (sdt->sewdrv[(Drv)-1].value.b[Nb]) +// 23-digit PEP-controllers code +#define PEP_code_A (sdt->pep_code_a) +#define PEP_code_Z (sdt->pep_code_z) +#define PEP_code_P (sdt->pep_code_p) +// PEP end-switches code +#define switch_A (sdt->pep_sw_a) +enum{ + Sw_minus_A = 1 // negative A value + ,Sw_plus240_A = 2 // end switch +240degr + ,Sw_minus240_A = 4 // end switch -240degr + ,Sw_minus45_A = 8 // "horizon" end switch +}; +#define switch_Z (sdt->pep_sw_z) +enum{ + Sw_0_Z = 1 + ,Sw_5_Z = 2 + ,Sw_20_Z = 4 + ,Sw_60_Z = 8 + ,Sw_80_Z = 0x10 + ,Sw_90_Z = 0x20 +}; +#define switch_P (sdt->pep_sw_p) +enum{ + Sw_No_P = 0 // no switches + ,Sw_22_P = 1 // 22degr + ,Sw_89_P = 2 // 89degr + ,Sw_Sm_P = 0x80 // Primary focus smoke sensor +}; +// PEP codes +#define PEP_code_F (sdt->pep_code_f) +#define PEP_code_D (sdt->pep_code_d) +#define PEP_code_Rin (sdt->pep_code_ri) +#define PEP_code_Rout (sdt->pep_code_ro) +// PEP flags +#define PEP_A_On (sdt->pep_on[0]) +#define PEP_A_Off (PEP_A_On==0) +#define PEP_Z_On (sdt->pep_on[1]) +#define PEP_Z_Off (PEP_Z_On==0) +#define PEP_P_On (sdt->pep_on[2]) +#define PEP_P_Off (PEP_P_On==0) +#define PEP_F_On (sdt->pep_on[3]) +#define PEP_F_Off (PEP_F_On==0) +#define PEP_D_On (sdt->pep_on[4]) +#define PEP_D_Off (PEP_D_On==0) +#define PEP_R_On (sdt->pep_on[5]) +#define PEP_R_Off ((PEP_R_On&1)==0) +#define PEP_R_Inp ((PEP_R_On&2)!=0) +#define PEP_K_On (sdt->pep_on[6]) +#define PEP_K_Off ((PEP_K_On&1)==0) +#define PEP_K_Inp ((PEP_K_On&2)!=0) +// IERS polar motion +#define polarX (sdt->xpol) +#define polarY (sdt->ypol) +// current Julian date, sidereal time correction by "Equation of the Equinoxes" +#define JDate (sdt->jdate) +#define EE_time (sdt->eetime) +// humidity value (%%) & hand input +#define val_Hmd (sdt->val_hmd) +#define inp_Hmd (sdt->val_hmd) +// worm position, mkm +#define worm_A (sdt->worm_a) +#define worm_Z (sdt->worm_z) +// locking flags +#define LockFlags (sdt->lock_flags) +enum{ + Lock_A = 1 + ,Lock_Z = 2 + ,Lock_P = 4 + ,Lock_F = 8 + ,Lock_D = 0x10 +}; +#define A_Locked (LockFlags&Lock_A) +#define Z_Locked (LockFlags&Lock_Z) +#define P_Locked (LockFlags&Lock_P) +#define F_Locked (LockFlags&Lock_F) +#define D_Locked (LockFlags&Lock_D) +// SEW dome divers speed +#define Dome_Speed (sdt->sew_dome_speed) +// SEW dome drive number (for indication) +#define DomeSEW_N (sdt->sew_dome_num) +// SEW dome driver parameters +#define statusSEWD (sdt->sewdomedrv.status) // controller status +#define speedSEWD (sdt->sewdomedrv.set_speed) // speed, rpm +#define vel_SEWD (sdt->sewdomedrv.mes_speed) /* / (rpm)*/ +#define currentSEWD (sdt->sewdomedrv.current) // current, A +#define indexSEWD (sdt->sewdomedrv.index) // parameter index +#define valueSEWD (sdt->sewdomedrv.value.l) // parameter value +// dome PEP codes +#define PEP_code_Din (sdt->pep_code_di) // data in +#define PEP_Dome_SEW_Ok 0x200 +#define PEP_Dome_Cable_Ok 0x100 +#define PEP_code_Dout (sdt->pep_code_do) // data out +#define PEP_Dome_SEW_On 0x10 +#define PEP_Dome_SEW_Off 0x20 + + +/******************************************************************************* +* BTA data structure * +*******************************************************************************/ + +#define BTA_Data_Ver 2 +struct BTA_Data { + int32_t magic; // magic value + int32_t version; // BTA_Data_Ver + int32_t size; // sizeof(struct BTA_Data) + int32_t pid; // main process PID + int32_t model; // model modes + int32_t timer; // timer selected + int32_t system; // main system mode + int32_t sys_target; // system pointing target + int32_t tel_focus; // telescope focus type + double pc_coeff[8]; // pointing correction system coefficients + int32_t tel_state; // telescope state + int32_t req_state; // new (required) state + int32_t tel_hard_state; // Power state + int32_t tel_mode; // telescope mode + int32_t az_mode; // azimuth reverce + int32_t p2_state; // P2 motor state + int32_t p2_req_mode; // P2 required state + int32_t focus_state; // focus motor state + int32_t dome_state; // dome motors state + int32_t pcor_mode; // pointing correction mode + int32_t trkok_mode; // tracking mode + double i_alpha, i_delta; // input values + double s_alpha, s_delta; // source + double v_alpha, v_delta; // intrinsic vel. + double i_azim, i_zdist; // input A/Z + double c_alpha, c_delta; // calculated values + double tag_a, tag_z, tag_p; // current values (from sensors) + double pcor_a, pcor_z, refr_z; // calculated corrections + double tcor_a, tcor_z, tref_z; // reverse calculation corr. + double diff_a, diff_z, diff_p; // coords difference + double vbasea,vbasez,vbasep; // base object velocity + double diffva,diffvz,diffvp; // correction by real speed + double speeda,speedz,speedp; // motor speed + double m_time_precip; // last precipitation time + uint8_t reserve[16]; // reserved + double rspeeda, rspeedz, rspeedp; // real motor speed (''/sec) + double simvela, simvelz, simvelp, simvelf, simveld; // model speed + uint32_t kost; // telescope & hand correction state + double m_time, s_time, l_time; // different time (UTC, stellar, local) + uint32_t ppndd_a, ppndd_z, ppndd_p, ppndd_b; // PPNDD sensor (rough) code + uint32_t dup_a, dup_z, dup_p, dup_f, dup_d; // DUP sensor (precise) code (Gray code) + uint32_t low_a, low_z, low_p, low_f, low_d; // binary 14-digit precise code + uint32_t code_a, code_z, code_p, code_b, code_f, code_d; // binary 23-digit rough code + uint32_t adc[8]; // ADC PCL818 (8-channel) codes + double val_a, val_z, val_p, val_b, val_f, val_d; + double val_t1, val_t2, val_t3, val_wnd; // calculated values + double val_alp, val_del; // RA/Decl calculated by A/Z + double vel_a, vel_z, vel_p, vel_f, vel_d; // measured speed + // system messages queue + struct SysMesg { + int32_t seq_num; + char type; // message type + char text[MesgLen]; // message itself + } sys_msg_buf[MesgNum]; + // access levels + uint32_t code_lev[5]; + // network settings + uint32_t netmask, netaddr, acsmask, acsaddr; + int32_t meteo_stat; // meteo data + double inp_b, inp_t1, inp_t2, inp_t3, inp_wnd; // input meteo values + double temper, press; // values used for refraction calculation + double m_time10, m_time15; // last wind gust time + double dut1; // IERS DUT1 (src: ftp://maia.usno.navy.mil/ser7/ser7.dat), DUT1 = UT1-UTC + double a_time, z_time, p_time; // sensors reading time + double speedain, speedzin, speedpin; // input speeds + double acc_a, acc_z, acc_p, acc_f, acc_d; // acceleration (''/sec^2) + uint32_t code_sew; // SEW code + struct SEWdata { // sew data + int32_t status; + double set_speed; // target speed, rpm + double mes_speed; // measured speed, rpm + double current; // measured current, A + int32_t index; // parameter number + union{ // parameter code + uint8_t b[4]; + uint32_t l; + } value; + } sewdrv[3]; + uint32_t pep_code_a, pep_code_z, pep_code_p; // 23-digit PEP-controllers code + uint32_t pep_sw_a, pep_sw_z, pep_sw_p; // PEP end-switches code + uint32_t pep_code_f, pep_code_d, pep_code_ri, pep_code_ro; // PEP codes + uint8_t pep_on[10]; // PEP flags + double xpol, ypol; // IERS polar motion (src: ftp://maia.usno.navy.mil/ser7/ser7.dat) + double jdate, eetime; // current Julian date, sidereal time correction by "Equation of the Equinoxes" + double val_hmd, inp_hmd; // humidity value (%%) & hand input + double worm_a, worm_z; // worm position, mkm + /* */ + uint32_t lock_flags; // locking flags + int32_t sew_dome_speed; // SEW dome divers speed: D_Lplus, D_Hminus etc + int32_t sew_dome_num; // SEW dome drive number (for indication) + struct SEWdata sewdomedrv; // SEW dome driver parameters + uint32_t pep_code_di, pep_code_do; // dome PEP codes +}; + +extern volatile struct BTA_Data *sdt; + +/******************************************************************************* +* Local data structure * +*******************************************************************************/ +// Oil pressure, MPa +#define PressOilA (sdtl->pr_oil_a) +#define PressOilZ (sdtl->pr_oil_z) +#define PressOilTank (sdtl->pr_oil_t) +// Oil themperature, degrC +#define OilTemper1 (sdtl->t_oil_1) // oil +#define OilTemper2 (sdtl->t_oil_2) // water + +// Local data structure +struct BTA_Local { + uint8_t reserve[120]; // reserved data + double pr_oil_a,pr_oil_z,pr_oil_t; // Oil pressure + double t_oil_1,t_oil_2; // Oil themperature +}; + +/** + * Message buffer structure + */ +struct my_msgbuf { + int32_t mtype; // message type + uint32_t acckey; // client access key + uint32_t src_pid; // source PID + uint32_t src_ip; // IP of command source or 0 for local + char mtext[100]; // message itself +}; + +extern volatile struct BTA_Local *sdtl; +extern int snd_id; +extern int cmd_src_pid; +extern uint32_t cmd_src_ip; + +#define ClientSide 0 +#define ServerSide 1 + +#ifndef BTA_MODULE +void bta_data_init(); +int bta_data_check(); +void bta_data_close(); +int get_shm_block(volatile struct SHM_Block *sb, int server); +int close_shm_block(volatile struct SHM_Block *sb); +void get_cmd_queue(struct CMD_Queue *cq, int server); +#endif + +int check_shm_block(volatile struct SHM_Block *sb); + +void encode_lev_passwd(char *passwd, int nlev, uint32_t *keylev, uint32_t *codlev); +int find_lev_passwd(char *passwd, uint32_t *keylev, uint32_t *codlev); +int check_lev_passwd(char *passwd); +void set_acckey(uint32_t newkey); + +// restore packing +#pragma pack(pop) +//#pragma GCC diagnostic pop + +#endif // __BTA_SHDATA_H__ diff --git a/bta_print_header/btaprinthdr.cflags b/bta_print_header/btaprinthdr.cflags new file mode 100644 index 0000000..68d5165 --- /dev/null +++ b/bta_print_header/btaprinthdr.cflags @@ -0,0 +1 @@ +-std=c17 \ No newline at end of file diff --git a/bta_print_header/btaprinthdr.config b/bta_print_header/btaprinthdr.config new file mode 100644 index 0000000..e5fd43e --- /dev/null +++ b/bta_print_header/btaprinthdr.config @@ -0,0 +1,7 @@ +// Add predefined macros for your project here. For example: +// #define THE_ANSWER 42 +#define _XOPEN_SOURCE 123456 +#define _POSIX_C_SOURCE 1005000 +#define _SVID_SOURCE +#define _BSD_SOURCE +#define _GNU_SOURCE diff --git a/bta_print_header/btaprinthdr.creator b/bta_print_header/btaprinthdr.creator new file mode 100644 index 0000000..e94cbbd --- /dev/null +++ b/bta_print_header/btaprinthdr.creator @@ -0,0 +1 @@ +[General] diff --git a/bta_print_header/btaprinthdr.creator.user b/bta_print_header/btaprinthdr.creator.user new file mode 100644 index 0000000..8e8c7d5 --- /dev/null +++ b/bta_print_header/btaprinthdr.creator.user @@ -0,0 +1,215 @@ + + + + + + EnvironmentId + {cf63021e-ef53-49b0-b03b-2f2570cdf3b6} + + + ProjectExplorer.Project.ActiveTarget + 0 + + + ProjectExplorer.Project.EditorSettings + + true + false + true + + Cpp + + CppGlobal + + + + QmlJS + + QmlJSGlobal + + + 2 + KOI8-R + false + 4 + false + 80 + true + true + 1 + true + false + 1 + true + true + 0 + 8 + true + 2 + true + false + true + false + + + + ProjectExplorer.Project.PluginSettings + + + true + + + + ProjectExplorer.Project.Target.0 + + Desktop + Desktop + {91347f2c-5221-46a7-80b1-0a054ca02f79} + 0 + 0 + 0 + + /tmp/bgd/C/bta_control_net-x86_64/bta_print_header + + + + all + + false + + + false + true + GenericProjectManager.GenericMakeStep + + 1 + Сборка + Сборка + ProjectExplorer.BuildSteps.Build + + + + + clean + + true + + + false + true + GenericProjectManager.GenericMakeStep + + 1 + Очистка + Очистка + ProjectExplorer.BuildSteps.Clean + + 2 + false + + По умолчанию + GenericProjectManager.GenericBuildConfiguration + + 1 + + + 0 + Развёртывание + Развёртывание + ProjectExplorer.BuildSteps.Deploy + + 1 + ProjectExplorer.DefaultDeployConfiguration + + 1 + + + dwarf + + cpu-cycles + + + 250 + + -e + cpu-cycles + --call-graph + dwarf,4096 + -F + 250 + + -F + true + 4096 + false + false + 1000 + + true + + false + false + false + false + true + 0.01 + 10 + true + kcachegrind + 1 + 25 + + 1 + true + true + true + valgrind + + 0 + 1 + 2 + 3 + 4 + 5 + 6 + 7 + 8 + 9 + 10 + 11 + 12 + 13 + 14 + + 2 + + + ProjectExplorer.CustomExecutableRunConfiguration + + + false + + false + true + false + false + true + + + + 1 + + + + ProjectExplorer.Project.TargetCount + 1 + + + ProjectExplorer.Project.Updater.FileVersion + 22 + + + Version + 22 + + diff --git a/bta_print_header/btaprinthdr.cxxflags b/bta_print_header/btaprinthdr.cxxflags new file mode 100644 index 0000000..6435dfc --- /dev/null +++ b/bta_print_header/btaprinthdr.cxxflags @@ -0,0 +1 @@ +-std=c++17 \ No newline at end of file diff --git a/bta_print_header/btaprinthdr.files b/bta_print_header/btaprinthdr.files new file mode 100644 index 0000000..332ff40 --- /dev/null +++ b/bta_print_header/btaprinthdr.files @@ -0,0 +1,7 @@ +bta_print.c +bta_print.h +bta_shdata.c +bta_shdata.h +cmdlnopts.c +cmdlnopts.h +main.c diff --git a/bta_print_header/btaprinthdr.includes b/bta_print_header/btaprinthdr.includes new file mode 100644 index 0000000..9c558e3 --- /dev/null +++ b/bta_print_header/btaprinthdr.includes @@ -0,0 +1 @@ +. diff --git a/bta_print_header/cmdlnopts.c b/bta_print_header/cmdlnopts.c new file mode 100644 index 0000000..984e0cf --- /dev/null +++ b/bta_print_header/cmdlnopts.c @@ -0,0 +1,76 @@ +/* + * This file is part of the btaprinthdr project. + * Copyright 2022 Edward V. Emelianov . + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include +#include +#include +#include +#include + +#include "cmdlnopts.h" + +/* + * here are global parameters initialisation + */ +static int help; +static glob_pars G; + +// DEFAULTS +// default global parameters +glob_pars const Gdefault = { + .refresh = 0.5, + .pidfile = "/tmp/bta_print_header.pid" +}; + +/* + * Define command line options by filling structure: + * name has_arg flag val type argptr help +*/ +myoption cmdlnopts[] = { + {"help", NO_ARGS, NULL, 'h', arg_none, APTR(&help), N_("show this help")}, + {"out", NEED_ARG, NULL, 'o', arg_string, APTR(&G.outfile), N_("output file name")}, + {"refresh", NEED_ARG, NULL, 'r', arg_double, APTR(&G.refresh), N_("refresh rate (0.1-30s; default: 0.5)")}, + {"pidfile", NEED_ARG, NULL, 'p', arg_string, APTR(&G.pidfile), N_("PID file name")}, + end_option +}; + + +/** + * Parse command line options and return dynamically allocated structure + * to global parameters + * @param argc - copy of argc from main + * @param argv - copy of argv from main + * @return allocated structure with global parameters + */ +glob_pars *parse_args(int argc, char **argv){ + void *ptr; + ptr = memcpy(&G, &Gdefault, sizeof(G)); assert(ptr); + // parse arguments + parseargs(&argc, &argv, cmdlnopts); + if(help) showhelp(-1, cmdlnopts); + if(argc > 0){ + G.outfile = strdup(argv[0]); + if(argc > 1){ + WARNX("%d unused parameters:\n", argc - 1); + for(int i = 1; i < argc; ++i) + printf("\t%4d: %s\n", i, argv[i]); + } + } + return &G; +} + diff --git a/bta_print_header/cmdlnopts.h b/bta_print_header/cmdlnopts.h new file mode 100644 index 0000000..67fdc76 --- /dev/null +++ b/bta_print_header/cmdlnopts.h @@ -0,0 +1,36 @@ +/* + * This file is part of the btaprinthdr project. + * Copyright 2022 Edward V. Emelianov . + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once +#ifndef __CMDLNOPTS_H__ +#define __CMDLNOPTS_H__ + +#include + +/* + * here are some typedef's for global data + */ +typedef struct{ + char *outfile; + char *pidfile; + double refresh; +} glob_pars; + +glob_pars *parse_args(int argc, char **argv); +void verbose(int levl, const char *fmt, ...); +#endif // __CMDLNOPTS_H__ diff --git a/bta_print_header/main.c b/bta_print_header/main.c new file mode 100644 index 0000000..6d40016 --- /dev/null +++ b/bta_print_header/main.c @@ -0,0 +1,102 @@ +/* + * This file is part of the btaprinthdr project. + * Copyright 2022 Edward V. Emelianov . + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "cmdlnopts.h" +#include "bta_print.h" +#include "bta_shdata.h" + +static pid_t childpid; +static glob_pars *G = NULL; + +void signals(int signo){ + signal(signo, SIG_IGN); + if(childpid){ // master process + if(signo == SIGUSR1){ // kill child + kill(childpid, signo); + signal(signo, signals); + return; + } + WARNX("Master killed with sig=%d", signo); + if(G && G->pidfile) unlink(G->pidfile); + } + exit(signo); +} + +int main(int argc, char **argv){ + char *self = strdup(argv[0]); + initial_setup(); + G = parse_args(argc, argv); + if(!G->outfile){ + ERRX("Point output file name"); + } + if(G->refresh < 0.1 || G->refresh > 30.){ + ERRX("Refresh rate should be from 0.1 to 30 seconds"); + } + FILE *f = fopen(G->outfile, "w"); + if(!f) ERRX("Can't create file %s", G->outfile); + fclose(f); unlink(G->outfile); + check4running(self, G->pidfile); + signal(SIGINT, signals); + signal(SIGQUIT, signals); + signal(SIGABRT, signals); + signal(SIGTERM, signals); + signal(SIGHUP, SIG_IGN); + signal(SIGTSTP, SIG_IGN); + signal(SIGUSR1, signals); +#ifndef EBUG + unsigned int pause = 5; + while(1){ + childpid = fork(); + if(childpid){ // master + double t0 = dtime(); + wait(NULL); + if(dtime() - t0 < 1.) pause += 5; + else pause = 1; + if(pause > 900) pause = 900; + sleep(pause); // wait a little before respawn + }else{ // slave + prctl(PR_SET_PDEATHSIG, SIGTERM); // send SIGTERM to child when parent dies + break; + } + } +#endif + if(!get_shm_block(&sdat, ClientSide)){ + ERRX("BTA daemon isn't running?"); + } + unsigned s = (unsigned)G->refresh; + useconds_t us = (G->refresh - s)* 1e6; + while(1){ + if(!check_shm_block(&sdat)) return 1; + print_header(G->outfile); + if(s) sleep(s); + usleep(us); + } + return 0; +} +